|
|
PDF AW-CB400N Data sheet ( Hoja de datos )
| Número de pieza | AW-CB400N | |
| Descripción | Remote Operation Panel Manual | |
| Fabricantes | Panasonic | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de AW-CB400N (archivo pdf) en la parte inferior de esta página. Total 30 Páginas | ||
|
No Preview Available !
.
Sec. 1
Sec. 2
Sec. 3
Sec. 4
Sec. 5
Service Information
Block Diagrams
Schematic Diagrams
Circuit Board Diagrams
Exploded Views &
Replacement Parts List
ORDER NO. CBMD0601005
Remote Operation Panel
AW-CB400N/L
© 2006 Matsushita Electric Industrial Co., Ltd. All rights reserved.
Unauthorized copying and distribution is a violation of law.
Free Datasheet http://www.datasheet-pdf.com/
1 page  
For AW-CB400N
Safety precautions
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to
alert the user to the presence of uninsulated
"dangerous voltage" within the product's
enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to
persons.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (service) instructions in the
literature accompanying the appliance.
For CANADA
This class A digital apparatus complies with
Canadian ICES-003.
Cet appareil numérique de la classe A est
conforme à la norme NMB-003 du Canada.
WARNING:
TO REDUCE THE RISK OF FIRE, ELECTRIC
SHOCK OR PRODUCT DAMAGE, DO NOT
EXPOSE THIS EQUIPMENT TO RAIN OR
MOISTURE, DRIPPING OR SPLASHING AND
THAT NO OBJECTS FILLED WITH LIQUIDS,
SUCH AS VASES, SHALL BE PLACED ON
THE EQUIPMENT.
WARNING:
TO PREVENT INJURY, THIS APPARATUS
MUST BE SECURELY ATTACHED TO THE
FLOOR/WALL IN ACCORDANCE WITH THE
INSTALLATION INSTRUCTIONS.
CAUTION:
TO REDUCE THE RISK OF FIRE OR SHOCK
HAZARD AND ANNOYING INTERFERENCE,
USE ONLY THE RECOMMENDED
ACCESSORIES.
FCC Note:
This device complies with Part 15 of the FCC Rules.
To assure continued compliance follow the attached
installation instructions and do not make any
unauthorized modifications.
This equipment has been tested and found to comply
with the limits for a class A digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful
interference when the equipment is operated in a
commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the
instruction manual, may cause harmful interference to
radio communications. Operation of this equipment in
a residential area is likely to cause harmful
interference in which case the user will be required to
correct the interference at their own expense.
CAUTION:
DO NOT INSTALL OR PLACE THIS UNIT IN A
BOOKCASE, BUILT-IN CABINET OR ANY
OTHER CONFINED SPACE IN ORDER TO
MAINTAIN ADEQUATE VENTILATION.
ENSURE THAT CURTAINS AND ANY OTHER
MATERIALS DO NOT OBSTRUCT THE
VENTILATION TO PREVENT RISK OF
ELECTRIC SHOCK OR FIRE HAZARD DUE
TO OVERHEATING.
Note:
The rating plate (serial number plate) is on the
bottom of the unit.
The socket outlet shall be installed near the
equipment and easily accessible or the mains plug or
an appliance coupler shall remain readily operable.
A warning that an apparatus with CLASS I
construction shall be connected to a MAINS socket
outlet with a protective earthing connection.
indicates safety information.
-
-5-
Free Datasheet http://www.datasheet-pdf.com/
5 Page 
1. SOFTWARE VERSION UPGRADE METHOD
1. Install the new version software (ROM) on the ROM changer board (VFK1667).
2. Make sure that the power of the unit is turned OFF.
3. Connect the board to the P5 (50 pin) connecter of Main PCB as shown in the figure.
4. Set the Baud Rate switch on the ROM changer board to the center position.
Since write protection is not activated, write operation can be started regardless of WRITE/PROTECT
selection.
5. Turn on power of unit. Then the green LED on the board blinks.
6. Press the START button. Then the green LED on the board turns off and the red
LED will blink at random. If erase the program and then write new program. (*1)
7. Confirmation of completion:
(a) Green LED lights
: completed successful
(b) Red LED, green LED blinks : error
After completed successfully, the unit goes into sleep mode. It will start after power is turned off and then on
again. Turn off power and remove the board. If it was error,
Press the START button to re-write. (*2)
8. Check the software version by turning on power of unit while pressing "Menu" and
"Call" buttons simultaneously. Then the software version will appear on its LCD
display.
(*1) If the operation ends with an error after writing, it is impossible to re-write once power of unit is turned off. Try
writing again by pressing START button.
(*2) In case of an error (red LED won’t blink) after START, turn power off, set the Baud Rate switch to either
position and retry writing. Normally, used at “0” position but another position may be effective.
Connection diagram
Erase/write
software
ROM
ROM CHANGER
START
ROM changer board
(VFK1667)
ROM changer board
(VFK1667)
RED
LED
GREEN
LED
BAUD
RATE
State of LED
Green LED
Initial status
Blinks
Erase after start
Unlit
Write after start
Unlit
Normal completion Lights
Abnormal completion Blinks
Red LED
Unlit
Blinks
Blinks at random
Unlit
Lights
WEITE/
PROTECT
INF-1
Free Datasheet http://www.datasheet-pdf.com/
11 Page | ||
| Páginas | Total 30 Páginas | |
| PDF Descargar | [ Datasheet AW-CB400N.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| AW-CB400L | Remote Operation Panel Manual | Panasonic |
| AW-CB400N | Remote Operation Panel Manual | Panasonic |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |