DataSheet.es    


PDF DT9205A Data sheet ( Hoja de datos )

Número de pieza DT9205A
Descripción Operator Manual
Fabricantes ETC　
Logotipo ETC Logotipo

DT9205A digital multimeter manual


1. - Digital Multimeter - Excel






Hay una vista previa y un enlace de descarga de DT9205A (archivo pdf) en la parte inferior de esta página.


Total 5 Páginas

No Preview Available ! DT9205A Hoja de datos, Descripción, Manual

8/2/12
DT92 Advanced Series
Free Datasheet http://www.datasheet4u.com/
DT92 Advanced Series
DT9201A/DT9202A/DT9203A/DT9204A
DT9205A/DT9206A/DT9207A/DT9208A
DIGITAL MULTIMETER
OPERATOR'S MANUAL
Large rotational folded LCD display
1. INTRODUCTION
This DT92 Advanced Series Digital Multimeter is a compact precision, battery operated, LCD display 3-Ѕ or 4-Ѕ digits Digital Instrument. Superiority:
High accuracy
Large rotational folded LCD display, button release lock
Digital height 25mm
Single 32 position rotary switch for FUNCTION and RANGE selection, allows fast and convenient operation.
Curvilinear mode soft case.
Colored indication jack with fully protection test leads.
Lower overage power Auto-Power Off
Data hold for easy reading
2. GENERAL SPECIFICATION
1. Display: 3-1/2 digits LCD with a maximum reading of 1999. (Model DT9203A/DT9204A is 4-Ѕ digit maximum reading of 19999.)
2. Measurement rate: updates 2-3 sec.
3. Over range indication: "1" figure only in the display
4. Automatic negative polarity indication.
5. The " " displayed when the battery voltage drops below the operating voltage.
6. Full range over load protection.
7. Capacitance measurement Auto-Zeroing.
8. Auto Power Off It will be automatically cut off in about 15 minutes after the power is turned on. It needs to be turned off and turned on again to continue
the power.
9. Operating temperature: 0°C~40°C, 0~75% R.H. Storage temperature: -10°C~50°C, 0~75% R.H.
10. Power Single standard 9V battery EC 6F22, NEDA 1604, JIS 006P.
11. Dimensions: 191L*89W*35Hmm.
12. Weight: approx 310g (including battery)
13. Accessories: test leads (pair), spare fuse 0.5A piece in case (model DT9201A fuse 2A), K-type thermocouple wire (model DT9207A/DT9208A only),
operator's manual.
3. ELECTRICAL SPECIFICATIONS
Accuracy is given as ± (% of reading + number of least significant digits) for one year, at 23°C±5°C RH<75%
1) DCV
Range
Accuracy
DT9201A DT9202A DT9203A DT9204A DT9205A DT9206A DT9207A DT9208A
200mV
2V
20V
0.5%± 1 0.5%±1 0.05%±3 0.1%±2 0.5%±1 0.5%± 1 0.5%± 1 0.5%± 1
200V
1000V 0.8%± 2 0.8%±2 0 .1%±5 0.2%±5 0.8%±2 0.8%± 2 0.8%±2 0.8%±2
Input impedance: 10MΩ on all range.
2) ACV
Range
Accuracy
DT9201A DT9202A DT9203A DT9204A DT9205A DT9206A DT9207A OT9208A
200mV 1.2%±3 1 2%±3 —
— 1.2%±3 — 1.2%±3 —
rumlin.narod.ru/dt92.htm
1/5

1 page




DT9205A pdf
8/2/12
Note:
DT92 Advanced Series
Free Datasheet http://www.datasheet4u.com/
When the function range switch at "LOGIC" position, the figure "1" is displayed, without over range inclusion and de-script the internal circuitry is
connected.
6. LCD DISPLAY PANEL ANGLE SELECTION
LCD display panel is locked in lie down position in normal operating condition and storage, when the usage needs to change the display panel angle, push down the button
which is above the top case, the display panel locking will be released. The display panel can be rotated to the best angle.
7. BATTERY AND FUSE REPLACEMENT
1. Battery and fuse replacement should only done after the test leads have been disconnected and power is off.
2. Loosen screws with suitable screwdriver and remove case bottom
3. The meter is power by a single 9V battery (EC 6F22, NEDA1604, JIS 006P). Snap the battery connector leads to the terminals of a new battery and
reinsert the battery into the case top. Dress the battery leads so that they will not be pinched between the case bottom can case top.
4. The meter is protected fast fuse 0.5A/250V (model DT9201A is protected fuse 2A/250V only), dimensions is Ф5*20mm.
5. Replace the case bottom and reinstall the three screws. Never operate the meter unless the case bottom is fully closed.
О братно
© 2004 Але ксандр Джулай
rumlin.narod.ru/dt92.htm
5/5

5 Page










PáginasTotal 5 Páginas
PDF Descargar[ Datasheet DT9205A.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
DT9205AInstall ManualETC
ETC
DT9205AOperator ManualETC
ETC
DT9205ADigital Multimeter Test / Calibration and Fault RepairETC
ETC

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

 Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

 Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar