|
|
Teilenummer | MT1102 |
|
Beschreibung | Hall-Effect Magnetic Position Sensors | |
Hersteller | MagnTek | |
Logo | ||
Gesamt 5 Seiten MT1102
CMOS Unipolar, Hall-Effect Magnetic Position Sensors
FEATURES
s Resistant to Physical Stress
s Superior Temperature Stability
s Chopper stablized amplifier
s Operation From Unregulated Supply
s High sensitivity
s Solid-State Reliability
s Open Drain output
s Small Size
These Hall-effect sensors are monolithic integrated circuits with
tighter magnetic specifications, designed to operate continuously over
extended temperatures to +125°C, and are more stable with both
temperature and supply voltage changes.
Each device includes a voltage regulator for operation with supply
voltages of 3.5 to 24 volts, hall plate with dynamic cancellation
system, temperature compensation circuitry, chopper stablized small-
signal amplifier, Schmitt trigger, and an open drain output to sink
up to 50 mA. With suitable output pull up, they can be used with
bipolar or CMOS logic circuits.
This sensor family includes most widely used industry package
type with same die inside:
MT1102A --- TO-92S
MT1102AT --- SOT-23
MT1102BT --- SOT-89B
ABSOLUTE MAXIMUM RATINGS
at TA = +25°C
Supply Voltage, VCC ........................ 28 V
Magnetic Flux Density, B ........... Unlimited
Output Off Voltage, VOUT ...................28 V
Continuous Output Current,
IOUT .......................................... 50 mA*
Reverse Output Current, IOUT ........ -50 mA
Junction Temperature, TJ .............. +150°C
Operating Temperature Range, T
A
-50°C to +125°C
Storage Temperature Range,
TS .............................. -50°C to +150°C
* Only when the Vcc=4.5V
Block Diagram
1 MagnTek Sensing technology
Free Datasheet http://www.datasheet4u.com/
| ||
Seiten | Gesamt 5 Seiten | |
PDF Download | [ MT1102 Schematic.PDF ] |
Teilenummer | Beschreibung | Hersteller |
MT110 | Thyristor Modules | TECHSEM |
MT1102 | Hall-Effect Magnetic Position Sensors | MagnTek |
MT1102A | Hall-Effect Magnetic Position Sensors | MagnTek |
MT1102A-T | Hall-Effect Magnetic Position Sensors | MagnTek |
MT1102AT | Hall-Effect Magnetic Position Sensors | MagnTek |
Teilenummer | Beschreibung | Hersteller |
CD40175BC | Hex D-Type Flip-Flop / Quad D-Type Flip-Flop. |
Fairchild Semiconductor |
KTD1146 | EPITAXIAL PLANAR NPN TRANSISTOR. |
KEC |
www.Datenblatt-PDF.com | 2020 | Kontakt | Suche |