DataSheet.es    


PDF TPC8406-H Data sheet ( Hoja de datos )

Número de pieza TPC8406-H
Descripción Field Effect Transistor
Fabricantes Toshiba 
Logotipo Toshiba Logotipo



Hay una vista previa y un enlace de descarga de TPC8406-H (archivo pdf) en la parte inferior de esta página.


Total 11 Páginas

No Preview Available ! TPC8406-H Hoja de datos, Descripción, Manual

TPC8406-H
TOSHIBA Field Effect Transistor Silicon P/N-Channel MOS Type
(P-ChannelN-Channel Ultra-High-Speed U-MOSIII)
TPC8406-H
High Efficiency DCDC Converter Applications
Notebook PC Applications
Portable Equipment Applications
CCFL Inverter Applications
Unit: mm
Small footprint due to a small and thin package
High speed switching
Low drain-source ON-resistance: P-Channel RDS (ON) = 24 m(typ.)
N-Channel RDS (ON) = 22 m(typ.)
Small gate charge:
P-Channel QSW = 9.7 nC (typ.)
N-Channel QSW = 3.5 nC (typ.)
High forward transfer admittance: P-Channel |Yfs| = 13 S (typ.)
N-Channel |Yfs| = 14 S (typ.)
Low leakage current: P-Channel IDSS = 10 μA (VDS = 40 V)
N-Channel IDSS = 10 μA (VDS = 40 V)
Enhancement mode
: P-Channel Vth = 0.8 to 2.0 V (VDS = 10 V, ID = 1 mA)
: N-Channel Vth = 1.1 to 2.3 V (VDS = 10 V, ID = 1 mA)
Absolute Maximum Ratings (Ta = 25°C)
Characteristic
Symbol
Rating
P-Channel N-Channel
Drain-source voltage
Drain-gate voltage (RGS = 20 kΩ)
Gate-source voltage
Drain current DC
Pulse
(Note 1)
(Note 1)
Drain power Single-device operation
dissipation
(Note 3a)
(t = 10s)
Single-device value at
(Note 2a) dual operation (Note 3b)
VDSS
VDGR
VGSS
ID
IDP
PD(1)
PD(2)
40
40
±20
6.5
26
1.5
1.1
40
40
±20
6.5
26
1.5
1.1
Drain power Single-device operation
dissipation
(Note 3a)
(t = 10s)
Single-device value at
(Note 2b) dual operation (Note 3b)
PD(1)
PD(2)
0.75
0.45
0.75
0.45
Single-pulse avalanche energy
EAS
19 19
(Note 4a) (Note 4b)
Avalanche current
Repetitive avalanche energy
Single-device value at operation
(Note 2a, 3b, 5)
IAR
EAR
6.5 6.5
0.08
Unit
V
V
V
A
W
mJ
A
mJ
JEDEC
JEITA
TOSHIBA
2-6J1E
Weight: 0.085 g (typ.)
Circuit Configuration
87
65
12
N-ch
34
P-ch
Channel temperature
Storage temperature range
Tch 150
Tstg 55 to 150
°C
°C
Note: For Notes 1 to 5, refer to the next page.
Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in
temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e.
operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate
reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (“Handling Precautions”/Derating Concept and
Methods) and individual reliability data (i.e. reliability test report and estimated failure rate, etc).
This transistor is an electrostatic-sensitive device. Handle with care.
1 2009-09-29
Free Datasheet http://www.datasheet4u.com/

1 page




TPC8406-H pdf
P-Channel
10
10
8
8 6
4.5
6
ID – VDS
4 3.2
3.4
3
Common source
Ta = 25°C
Pulse test
2.8
2.7
4 2.6
2.5
2
VGS = −2.4 V
0
0
0.2
0.4
0.6
0.8
1.0
Drain-source voltage VDS (V)
TPC8406-H
20
10
16 8
6
4.5
12
ID – VDS
Common source
4 Ta = 25°C
3.4
Pulse test
3.2
3.0
8 2.8
4 2.6
VGS = −2.4 V
0
0
0.4
0.8
1.2
1.6
2
Drain-source voltage VDS (V)
30
Common source
VDS = −10 V
25 Pulse test
ID – VGS
20
15
10
5
0
0
100
25
Ta = −55°C
1 2 3 4
Gate-source voltage VGS (V)
5
VDS – VGS
0.5
Common source
Ta = 25
0.4
Pulse test
0.3
0.2
0.1
0
0
ID = −6.5 A
3.3
1.7
2 4 6 8 10 12
Gate-source voltage VGS (V)
100
Common source
VDS = −10 V
Pulse test
Yfs– ID
10 Ta = −55°C
100
25
1
0.1
0.1
1 10
Drain current ID (A)
100
RDS (ON) – ID
300
Common source
Ta = 25°C
Pulse test
100
4.5 V
30
VGS = −10 V
10
3
0.1 1 10
Drain current ID (A)
100
5 2009-09-29
Free Datasheet http://www.datasheet4u.com/

5 Page





TPC8406-H arduino
TPC8406-H
RESTRICTIONS ON PRODUCT USE
Toshiba Corporation, and its subsidiaries and affiliates (collectively “TOSHIBA”), reserve the right to make changes to the information
in this document, and related hardware, software and systems (collectively “Product”) without notice.
This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with
TOSHIBA’s written permission, reproduction is permissible only if reproduction is without alteration/omission.
Though TOSHIBA works continually to improve Product’s quality and reliability, Product can malfunction or fail. Customers are
responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and
systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily
injury or damage to property, including data loss or corruption. Before creating and producing designs and using, customers must
also refer to and comply with (a) the latest versions of all relevant TOSHIBA information, including without limitation, this document,
the specifications, the data sheets and application notes for Product and the precautions and conditions set forth in the “TOSHIBA
Semiconductor Reliability Handbook” and (b) the instructions for the application that Product will be used with or for. Customers are
solely responsible for all aspects of their own product design or applications, including but not limited to (a) determining the
appropriateness of the use of this Product in such design or applications; (b) evaluating and determining the applicability of any
information contained in this document, or in charts, diagrams, programs, algorithms, sample application circuits, or any other
referenced documents; and (c) validating all operating parameters for such designs and applications. TOSHIBA ASSUMES NO
LIABILITY FOR CUSTOMERS’ PRODUCT DESIGN OR APPLICATIONS.
Product is intended for use in general electronics applications (e.g., computers, personal equipment, office equipment, measuring
equipment, industrial robots and home electronics appliances) or for specific applications as expressly stated in this document.
Product is neither intended nor warranted for use in equipment or systems that require extraordinarily high levels of quality and/or
reliability and/or a malfunction or failure of which may cause loss of human life, bodily injury, serious property damage or serious
public impact (“Unintended Use”). Unintended Use includes, without limitation, equipment used in nuclear facilities, equipment used
in the aerospace industry, medical equipment, equipment used for automobiles, trains, ships and other transportation, traffic signaling
equipment, equipment used to control combustions or explosions, safety devices, elevators and escalators, devices related to electric
power, and equipment used in finance-related fields. Do not use Product for Unintended Use unless specifically permitted in this
document.
Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part.
Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any
applicable laws or regulations.
The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any
infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to
any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise.
ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE
FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY
WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR
LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND
LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO
SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS
FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.
Do not use or otherwise make available Product or related software or technology for any military purposes, including without
limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile
technology products (mass destruction weapons). Product and related software and technology may be controlled under the
Japanese Foreign Exchange and Foreign Trade Law and the U.S. Export Administration Regulations. Export and re-export of Product
or related software or technology are strictly prohibited except in compliance with all applicable export laws and regulations.
Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product.
Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances,
including without limitation, the EU RoHS Directive. TOSHIBA assumes no liability for damages or losses occurring as a result of
noncompliance with applicable laws and regulations.
11
2009-09-29
Free Datasheet http://www.datasheet4u.com/

11 Page







PáginasTotal 11 Páginas
PDF Descargar[ Datasheet TPC8406-H.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
TPC8406-HField Effect TransistorToshiba
Toshiba

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar