Datenblatt-pdf.com


CN100A110 Schematic ( PDF Datasheet ) - TDK

Teilenummer CN100A110
Beschreibung Optimum DC-DC Power Module
Hersteller TDK
Logo TDK Logo 




Gesamt 14 Seiten
CN100A110 Datasheet, Funktion
CN-A SERIES
http://www.DataSheet4U.com/
5
CN-A_1






CN100A110 Datasheet, Funktion
CN100A110
CN100A110 Specifications
Voltage Range
Input Efficiency(typ)
(*1)
Current
(*1)
Nominal Voltage
Maximum Current
Maximum Power
Voltage Setting Accuracy (*1)
Output Maximum Line Regulation(*2)
Maximum Load Regulation(*3)
Temperature Coefficient
Maximum Ripple & Noise (*8)
Voltage Adjustable Range (*8)
Over Current Protection (*4)
Over Voltage Protection(*5)(*7)
Function
Remote
Remote
Sensing
ON/OFF
Control
(*7)
(*7)
Parallel Operation
Series Operation
(*7)
Operating Temperature (*6)
Storage Temperature
Operating Humidity
Storage Humidity
Environment
Vibration
Shock
Cooling
Isolation Withstand Voltage
Isolation Resistance
Standards Safety Standards
Mechanical
Weight(typ)
Size (W×H×D)
(*9)
DC60 - 160
85 88
1.08
1.05
5 12 15 24
20 8.4 6.7 4.2
100
100.8
100.5
100.8
-/+ 1
20 48 60 96
40 96 120 192
0.02%/°C
100 150 240
-10 / +20
-/+ 10
105 - 140
125 - 145 (Inverter shutdown method)
Possible
Possible (SHORT : ON OPEN : OFF)
-
Possible
-40 - +100 (Baseplate) Ambient Temperature min=-40°C
-40 - +100
5 - 95 (No Dewdrop)
5 - 95 (No Dewdrop)
At No Operating, 10-55Hz (Sweep for 1min.)
Amplitude 0.825mm Constant (Maximum 49.0m/s²) X,Y,Z 1 hour each
IEC61373 - Category 1 - Grade B
196.1m/s² IEC61373 - Category 1 - Grade B
http://www.DataSheet4U.com/
Conduction Cooled
Input-Baseplate : 1.5kVAC (20mA), Input-Output : 3.0kVAC for 1min.
Output-Baseplate : 500VAC for 1min (20mA).
More than 100MΩ at 25°C and 70%RH Output-Baseplate…500VDC
Approved by UL60950-1, CSA60950-1, EN60950-1
70
36.8 x 12.7 x 57.9 (Refer to Outline Drawing)
*1. At 110VDC and maximum output current.
(Baseplate Temperature = +25°C)
*2. 60 - 160VDC, Constant load.
*3. No Load - Full Load, Constant input voltage.
*4. 5V delay shutdown when left in OCP condition, with the output voltage less than the LVP level.
12V, 15V and 24V constant current limiting with automatic recovery.
LVP reset : Line off or Control off.
*5. OVP reset : Line off or Control off.
*6. Rating - Refer to Derating Curve on the next page.
- Load(%) is percent of maximum output current.
- Refer to Instruction Manual.
*7. Refer to Instruction Manual.
*8. External components are necessary for operation. (Refer to Basic Connection and Instruction Manual.)
*9. This specification applies to power supply module as stand-alone.
CN-A_6

6 Page









CN100A110 pdf, datenblatt
CN100A24
CN100A24 Specifications
Voltage Range
Input Efficiency(typ)
(*1)
Current
(*1)
Nominal Voltage
Maximum Current
Maximum Power
Voltage Setting Accuracy (*1)
Output Maximum Line Regulation(*2)
Maximum Load Regulation(*3)
Temperature Coefficient
Maximum Ripple & Noise (*8)
Voltage Adjustable Range (*8)
Over Current Protection (*4)
Over Voltage Protection(*5)(*7)
Function
Remote
Remote
Sensing
ON/OFF
Control
(*7)
(*7)
Parallel Operation
Series Operation
(*7)
Operating Temperature (*6)
Storage Temperature
Operating Humidity
Storage Humidity
Environment
Vibration
Shock
Cooling
Isolation Withstand Voltage
Isolation Resistance
Standards Safety Standards
Mechanical
Weight(typ)
Size (W×H×D)
(*9)
86
4.91
5
20
100
20
40
100
-10 / +20
DC14.4 - 36 40V transient for 3sec
88
4.83
12
8.4
100.8
-/+ 1
48
96
0.02%/°C
150
-/+ 10
105 - 140
125 - 145 (Inverter shutdown method)
Possible
Possible (SHORT : ON OPEN : OFF)
24
4.2
96
192
240
Possible
-40 - +100 (Baseplate) Ambient Temperature min=-40°C
-40 - +100
5 - 95 (No Dewdrop)
5 - 95 (No Dewdrop)
At No Operating, 10-55Hz (Sweep for 1min.)
Amplitude 0.825mm Constant (Maximum 49.0m/s²) X,Y,Z 1 hour each
IEC61373 - Category 1 - Grade B
196.1m/s² IEC61373 - Category 1 - Grade B
http://www.DataSheet4U.com/
Conduction Cooled
Input-Baseplate : 2.0kVAC for 1min. (20mA), Input-Output : 3.0kVAC for 1min. (20mA).
Output-Baseplate : 500VAC for 1min. (20mA).
More than 100MΩ at 25°C and 70%RH Output-Baseplate…500VDC
Designed to meet UL60950-1, CSA60950-1, EN60950-1
70
36.8 x 12.7 x 57.9 (Refer to Outline Drawing)
*1. At 24VDC and maximum output current.
(Baseplate Temperature = +25°C)
*2. 14.4 - 36VDC, Constant load.
*3. No Load - Full Load, Constant input voltage.
*4. 5V delay shutdown when left in OCP condition, with the output voltage less than the LVP level.
12V and 24V constant current limiting with automatic recovery.
LVP reset : Line off or Control off.
*5. OVP reset : Line off or Control off.
*6. Rating - Refer to Derating Curve on the next page.
- Load(%) is percent of maximum output current.
- Refer to Instruction Manual.
*7. Refer to Instruction Manual.
*8. External components are necessary for operation. (Refer to Basic Connection and Instruction Manual.)
*9. This specification applies to power supply module as stand-alone.
CN-A_12

12 Page





SeitenGesamt 14 Seiten
PDF Download[ CN100A110 Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
CN100A110Optimum DC-DC Power ModuleTDK
TDK

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche