|
|
Teilenummer | ET-1102 |
|
Beschreibung | 900 MHz Digital Spread Spectrum Cordless Telephone | |
Hersteller | RadioShack | |
Logo | ||
Gesamt 28 Seiten 43-1102.fm Page 1 Tuesday, August 17, 1999 4:37 PM
Cat. No. 43-1102
OWNER’S MANUAL
Please read before using this equipment.
ET-1102
900 MHz Digital Spread Spectrum
Cordless Telephone
with Caller ID/Call Waiting ID
http://www.DataSheet4U.com/
43-1102.fm Page 6 Tuesday, August 17, 1999 4:37 PM
INSTALLATION
MOUNTING THE PHONE
You can place the ET-1102’s base on a
desk or table, mount it on a standard
wall plate, or mount it directly on a wall.
Choose a location that is:
• near an AC outlet
• near a telephone line jack
• out of the way of normal activities
• away from electrical machinery,
electrical appliances, metal walls or
filing cabinets, wireless intercoms,
alarms, and room monitors
• away from other cordless phones
The base’s location affects the hand-
set’s range. If you have a choice of sev-
eral locations, try each to see which
provides the best performance.
Caution: The supplied RadioShack
adapter was designed specifically for
your ET-1102. Use only the supplied
adapter.
Notes:
• Your telephone connects directly to
a modular phone line jack. If your
phone line jack is not a modular
jack, you can update the wiring
yourself, using jacks and adapters
available from your local Ra-
dioShack store. Or, you can let the
telephone company update the wir-
ing for you.
• The USOC number of the jack to be
installed is RJ11C, or RJ11W for a
wall plate jack.
On a Desk
Follow these steps when you place the
base on a desk or table.
1. Insert the bracket’s tabs into the
base’s upper tab slots as shown,
then press down on the bracket’s
clips and insert them into the clip
slots.
Clip Slots
Clips
Upper Tab Slots
2. Plug one end of the supplied longhttp://www.DataSheet4U.com/
modular cord into the TEL LINE jack
on the back of the base.
3. Plug the modular cord’s other end
into a modular phone line jack.
6
6 Page 43-1102.fm Page 12 Tuesday, August 17, 1999 4:37 PM
SETTING THE RINGER’S
VOLUME
At any time except during a call, press
VOL s or t to set the ringer volume. The
phone rings at the selected volume and
the display shows Ringer High or
Ringer Low.
2. Press SELECT to change the auto
talk setting. On or Off appears indi-
cating the selected setting.
3. To clear the display when you finish,
press FUNCTION or return the hand-
set to the base.
USING AUTO TALK
Your phone is preset so you must press
TALK to answer a call. With auto talk
turned on, you can answer a call by just
lifting the handset from the base, or, if
the handset is away from the base, by
pressing any key.
Follow these steps to turn auto talk on or
off.
1. Lift the handset and press FUNC-
TION. A menu appears with Auto
Talk selected.
TURNING CALLER ID/
CALL WAITING ON/OFF
If you have Call Waiting with Caller ID
service, you can set the ET-1102 to
show Caller ID information for an incom-http://www.DataSheet4U.com/
ing call even while you are already on
the phone.
Follow these steps to turn the Caller ID/
Call Waiting feature on or off.
1. Lift the handset and press FUNC-
TION.
2. Press 2 or t to select CIDCW (Caller
ID/Call Waiting).
3. Press SELECT to change the Caller
ID/Call Waiting setting. On or Off
appears indicating the selected set-
ting.
4. Return the handset to the base to
store the new setting.
12
12 Page | ||
Seiten | Gesamt 28 Seiten | |
PDF Download | [ ET-1102 Schematic.PDF ] |
Teilenummer | Beschreibung | Hersteller |
ET-1102 | 900 MHz Digital Spread Spectrum Cordless Telephone | RadioShack |
Teilenummer | Beschreibung | Hersteller |
CD40175BC | Hex D-Type Flip-Flop / Quad D-Type Flip-Flop. |
Fairchild Semiconductor |
KTD1146 | EPITAXIAL PLANAR NPN TRANSISTOR. |
KEC |
www.Datenblatt-PDF.com | 2020 | Kontakt | Suche |