Datenblatt-pdf.com


EXB-38V Schematic ( PDF Datasheet ) - Panasonic

Teilenummer EXB-38V
Beschreibung Chip Resistor Array
Hersteller Panasonic
Logo Panasonic Logo 




Gesamt 6 Seiten
EXB-38V Datasheet, Funktion
Chip Resistor Array
Chip Resistor Array
Type: EXB1 : 0201 Array
EXB2 : 0402 Array
EXB3 : 0603 Array
EXBN : 0402 Array
EXBV : 0603 Array
EXBS : 0805 Array
Features
High density
2 resistors in 0.8 mm ҂ 0.6 mm size (EXB14V)
4 resistors in 1.4 mm ҂ 0.6 mm size (EXB18V)
2 resistors in 1.0 mm ҂ 1.0 mm size (EXB24V)
4 resistors in 2.0 mm ҂ 1.0 mm size (EXB28V, N8V)
8 resistors in 3.8 mm ҂ 1.6 mm size (EXB2HV)
2 resistors in 1.6 mm ҂ 1.6 mm size (EXB34V, V4V)
4 resistors in 3.2 mm ҂ 1.6 mm size (EXB38V, V8V)
4 resistors in 5.1 mm ҂ 2.2 mm size (EXBS8V)
Improvement of placement efficiency
Placement efficiency of Chip Resistor Array is two, four or eight times of the flat type chip resistor
Explanation of Part Numbers
1 2 3 4 5 6 7 8 9 10 11
EXBV8V4 7 2 JV
Product Code
Thick Film
Chip Resistor
Networks
Chip Resistor Array
Type: inches
1 0201 Array
2 0402 Array
3 0603 Array Convex Terminal
N 0402 Array
V 0603 Array Concave Terminal
S 0805 Array
No. of Terminal
4 4 Terminal
8 8 Terminal
H 16 Terminal
Construction (Example : Concave Terminal)
Schematics
http://www.DataSheet4U.net/
V
Isolated
type
Resistance Value
The first two digits are
significant figures of
resistance value and
the third one denotes
the number of zeros
following. Jumper is
expressed by R00
Example: 222: 2.2 kȑ
Schematics
Isolated type
Resistance
Tolerance
J ±5 %
0 Jumper
Packaging Methods
Code Packaging
Embossed
Nil Carrier Taping
(S8V)
Punched Carrier Taping
X 2 mm pitch
(14V, 18V, 24V, 28V, N8V)
Punched Carrier Taping
V 4 mm pitch
(2HV, 34V, 38V, V4V, V8V)
14V, 24V, 34V, V4V 18V, 28V, N8V, 38V, V8V, S8V
2 resistors
43
4 resistors
8765
Protective coating
Alumina substrate
Thick film
resistive element
Electrode (Outer)
Electrode (Between)
Electrode (Inner)
12
1234
2HV
8 resistors
16 15 14 13 12 11 10 9
12345678
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
May. 2005
datasheet pdf - http://www.DataSheet4U.net/






EXB-38V Datasheet, Funktion
Safety Precautions
(Common precautions for Fixed Resistors)
• When using our products, no matter what sort of equipment they might be used for, be sure to make a written
agreement on the specifications with us in advance. The design and specifications in this catalog are subject
to change without prior notice.
• Do not use the products beyond the specifications described in this catalog.
• This catalog explains the quality and performance of the products as individual components. Before use, check
and evaluate their operations when installed in your products.
• Install the following systems for a failsafe design to ensure safety if these products are to be used in equipment
where a defect in these products may cause the loss of human life or other significant damage, such as damage to
vehicles (automobile, train, vessel), traffic lights, medical equipment, aerospace equipment, electric heating
appliances, combustion/gas equipment, rotating equipment, and disaster/crime prevention equipment.
Systems equipped with a protection circuit and a protection device
Systems equipped with a redundant circuit or other system to prevent an unsafe status in the event of a single fault
(1) Precautions for use
• These products are designed and manufactured for general and standard use in general electronic
equipment (e.g. AV equipment, home electric appliances, office equipment, information and communication
equipment)
• These products are not intended for use in the following special conditions. Before using the products, carefully
check the effects on their quality and performance, and determine whether or not they can be used.
1. In liquid, such as water, oil, chemicals, or organic solvent
2. In direct sunlight, outdoors, or in dust
3. In salty air or air with a high concentration of corrosive gas, such as Cl2, H2S, NH3, SO2, or NO2
4. In an environment where strong static electricity or electromagnetic waves exist
5. In an environment where these products cause dew condensation
6. Sealing or coating of these products or a printed circuit board on which these products are mounted, with resin
or other materials
• These products generate Joule heat when energized. Carefully position these products so that their heat will not
affect the other components.
• Carefully position these products so that their temperatures will not exceed the category temperature range due
to the effects of neighboring heat-generating components. Do not mount or place heat-generating components or
inflammables, such as vinyl-coated wires, near these productshttp://www.DataSheet4U.net/ .
• Note that non- cleaning solder, halogen-based highly active flux, or water-soluble flux may deteriorate the
performance or reliability of the products.
• Carefully select a flux cleaning agent for use after soldering. An unsuitable agent may deteriorate the
performance or reliability. In particular, when using water or a water-soluble cleaning agent, be careful not to leave
water residues. Otherwise, the insulation performance may be deteriorated.
(2) Precautions for storage
The performance of these products, including the solderability, is guaranteed for a year from the date of arrival at your
company, provided that they remain packed as they were when delivered and stored at a temperature of 5 °C to 35 °
C and a relative humidity of 45 % to 85 %.
Even within the above guarantee periods, do not store these products in the following conditions. Otherwise, their
electrical performance and/or solderability may be deteriorated, and the packaging materials (e.g. taping materials)
may be deformed or deteriorated, resulting in mounting failures.
1. In salty air or in air with a high concentration of corrosive gas, such as Cl2, H2S, NH3, SO2, or NO2
2. In direct sunlight
<Package markings>
Package markings include the product number, quantity, and country of origin.
In principle, the country of origin should be indicated in English.
– ER3 –
Mar. 2005
datasheet pdf - http://www.DataSheet4U.net/

6 Page







SeitenGesamt 6 Seiten
PDF Download[ EXB-38V Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
EXB-38VChip Resistor ArrayPanasonic
Panasonic

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche