Datenblatt-pdf.com


XTOR5A Schematic ( PDF Datasheet ) - Lumark

Teilenummer XTOR5A
Beschreibung CROSSTOUR MAXX LED
Hersteller Lumark
Logo Lumark Logo 




Gesamt 3 Seiten
XTOR5A Datasheet, Funktion
DESCRIPTION
The patent pending Lumark Crosstour™ MAXX LED Wall Pack Series
of luminaries provides low-profile architectural style with super bright,
energy-efficient LEDs. The rugged die-cast aluminum construction,
back box with secure lock hinges, stainless steel hardware along with a
sealed and gasketed optical compartment make Crosstour impervious
to contaminants. The Crosstour MAXX wall luminaire is ideal for wall/
surface, inverted mount for facade/canopy illumination, perimeter and
site lighting. Typical applications include pedestrian walkways, building
entrances, multi-use facilities, industrial facilities, perimeter parking
areas, storage facilities, institutions, schools, and loading docks.
SPECIFICATION FEATURES
Catalog #
Project
Comments
Prepared by
LUMARK®
Type
Date
Construction
Low-profile LED design with
rugged one-piece, die-cast
aluminum back box and hinged
removable door. Matching housing
styles incorporate both a full cutoff
and refractive lens design. Full
cutoff and refractive lens models
are available in 50W and 85W.
Patent pending secure lock hinge
feature allows for safe and easy
tool-less electrical connections with
the supplied push-in connectors.
Back box includes four (4) 1/2" NPT
threaded conduit entry points. The
back box is secured by four (4) lag
bolts (supplied by others). External
fin design extracts heat from the
fixture surface. One-piece silicone
gasket seals door and back box.
Not recommended for car wash
applications.
Optical
Silicone sealed optical LED
chamber incorporates a custom
engineered reflector providing
high-efficiency illumination.
Full cutoff models integrate an
impact-resistant molded refractive
prism optical lens assembly
meeting requirements for Dark
Sky compliance. Refractive lens
models incorporate a molded lens
assembly designed for maximum
battery emergency egress includes
forward throw. Solid state LED
emergency operation test switch,
Crosstour luminaries are thermally an AC-ON indicator light and a
optimized with two (2) lumen
premium extended rated sealed
packages in cool 5000K or neutral
maintenance-free nickel-metal
warm 3500K LED color temperature hydride battery pack. The separate
(CCT).
emergency lighting LEDs are wired
to provide redundant emergency
Electrical
lighting. Listed to UL Standard 924,
LED driver is mounted to the
Emergency Lighting.
die-cast aluminum housing
for optimal heat sinking. LED
Area and Site Pole Mounting
thermal management system
Optional extruded aluminum 6-1/2”
incorporates both conduction and arm features internal bolt guides
natural convection to transfer
for supplied twin support rods,
heat rapidly away from the LED
allowing for easy positioning of the
source. 50W and 85W models
fixture during installation to pole.
operate in -40°C to 40°C [-40°F to
Supplied with round plate adapter
104°F]. High ambient 50°C [122°F]
plate. Optional tenon adapter fits
models available. Crosstour MAXX 2-3/8” or 3-1/2” O.D. Tenon.
luminaires maintain greater than
85% of initial light output after
Finish
60,000 hours of operation. Four
Crosstour MAXX is protected with
(4) half-inch NPT threaded conduit a Super TGIC carbon bronze or
entry points allow for thru-branch
summit white polyester powder
wiring. Back box is an authorized
coat paint. Super TGIC powder coat
electrical wiring compartment.
paint finishes withstand extreme
Integral LED electronic driver
climate conditions while providinghttp://www.DataSheet4U.net/
incorporates surge protection. 120- optimal color and gloss retention
277V 50/60Hz, 480V 60Hz, or 347V
of the installed life.
60Hz electrical operation.
Warranty
Emergency Egress
Five-year limited warranty.
Optional integral cold weather
XTOR
CROSSTOUR
MAXX LED
DIMENSIONS
FULL CUTOFF
11"
[279mm]
DEEP BACK BOX
REFRACTIVE LENS
11"
[279mm]
DEEP BACK BOX
APPLICATIONS:
WALL / SURFACE
INVERTED
SITE LIGHTING
8-3/4"
[222mm]
6-1/4"
[159mm]
7"
[178mm]
8-3/4"
[222mm]
6"
[152mm]
ARM MOUNT
ARM DRILLING
TENON ADAPTER
TYPE "C"
4-1/2"
[114mm]
6-1/2"
[165mm]
13-1/2" [343mm]
2-5/8"
[67mm] 3/4" [19mm]
Dia. Hole
3" [77mm]
1-1/2" [39mm]
(2) 9/16" [15mm]
Dia. Holes
12"
[305mm]
Top Cap
Set
Screws
(Fits 2-3/8" or 3-1/2" O.D.Tenon)
7"
[178mm]
* www.designlights.org
CERTIFICATION DATA
UL/cUL Wet Location Listed
LM79 / LM80 Compliant
ROHS Compliant
ARRA Compliant
NOM Compliant Models
3G Vibration Tested
UL924 Listed (CBP Models)
IP66 Rated
Lighting Facts® Registered
DesignLights™ Consortium Qualified*
TECHNICAL DATA
40°C Ambient Temperature
External Supply Wiring 90°C Minimum
EPA
Effective Projected Area (Sq. Ft.):
XTOR5A/XTOR9A = 0.54
With Pole Mount Arm = 0.98
SHIPPING DATA:
Approximate Net Weight:
12-15 lbs. [5.4-6.8 kgs.]
ADH130015
2013-03-06 14:53:47
datasheet pdf - http://www.DataSheet4U.net/





SeitenGesamt 3 Seiten
PDF Download[ XTOR5A Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
XTOR5ACROSSTOUR MAXX LEDLumark
Lumark
XTOR5A(XTOR5A / XTOR9A) MAXX LEDCooper Lighting
Cooper Lighting
XTOR5A-NCROSSTOUR MAXX LEDLumark
Lumark
XTOR5ARLCROSSTOUR MAXX LEDLumark
Lumark
XTOR5ARL-NCROSSTOUR MAXX LEDLumark
Lumark

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche