|
|
PDF T500X336K035 Data sheet ( Hoja de datos )
| Número de pieza | T500X336K035 | |
| Descripción | Tantalum Surface Mount Capacitors | |
| Fabricantes | KEMET | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de T500X336K035 (archivo pdf) en la parte inferior de esta página. Total 17 Páginas | ||
|
No Preview Available !
High Temperature MnO2 Tantalum Surface Mount Capacitors
T500 200°C Rated MnO2 Series
Overview
The KEMET T500 Series is a high-temperature product that
offers optimum performance characteristics in applications with
operating temperatures up to 200°C.
Applications
Typical applications include decoupling and filtering in down-
hole, military and aerospace industries.
Benefits
• Meets or exceeds EIA standard 535BAAC
• Weibull failure rate option B
• Standard gold-plated termination
• RoHS Compliant
• Operating temperature range of -55˚C to +200˚C
• 100% steady-state accelerated aging at 200°C
• Voltage derating is 1/3 at 200°C
• Qualified at 1,000 hours of life test at 200°C with 0.33 VR
• Taped and reeled per EIA 481–1
• Meets MSL 1 requirements for Pb-free assembly according to
JEDEC J–STD–020
• Surge current options available
http://www.DataSheet4U.net/
SPICE
For a detailed analysis of specific part numbers, please visit www.kemet.com for a free download of KEMET's SPICE software.
The KEMET SPICE program is freeware intended to aid design engineers in analyzing the performance of these capacitors over
frequency, temperature, ripple, and DC bias conditions.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
One world. One KEMET
T2063_T500 • 4/1/2013 1
datasheet pdf - http://www.DataSheet4U.net/
1 page  
High Temperature MnO2 Tantalum Surface Mount Capacitors – T500 200°C Rated MnO2 Series
Dimensions – Millimeters
Termination
cutout at
KEMET’s
option,
either end
Case Size
Component
KEMET EIA
L*
W*
H*
F* ±0.1 S* ±0.3 B* ±0.15
±(0.004) ±(0.012) (Ref) ±0.006
X (Ref)
X
7343–43
7.3 ±0.3
(0.287 ±0.012)
4.3 ±0.3
(0.169 ±0.012)
4.0 ±0.3
(0.157 ±0.012)
2.4 (.095)
1.3 (0.051)
0.5 (.020)
0.10 ± 0.10
(.004 ± .004)
P (Ref)
1.7 (.067)
R (Ref) T (Ref) A (Min) G (Ref) E (Ref)
1.0 (.039) 0.13 (.005) 3.8 (.150) 3.5 (.138) 3.5 (.138)
Notes: (Ref) – Dimensions provided for reference only. No dimensions are provided for B, P or R because low profile cases do not have a bevel or a notch.
* MIL–PRF–55365/8 specified dimensions
Table 1 – Ratings & Part Number Reference
Rated Working Rated
Voltage Voltage Cap
(V) 85ºC @ +125°C @ +200°C
10 6.6 3.3
16 10.6 5.3
35 23.1 11.6
µF
220
100
33
Case
Code/
Case Size
KEMET/EIA
X/7343-43
X/7343-43
X/7343-43
KEMET Part
Number
DC
Leakage
DF ESR
Maximum Allowable
Ripple Current
(See below for part
options)
µA @ 20°Chttp://www.DataSheet4U.net/
Max/5 Min.
µA @ 200°C,
0.33 VR
Max/5 Min
% @ 20ºC
120 Hz Max
mΩ @ 20ºC (mA) 100 kHz, (mA) 100 kHz, (mA) 100 kHz,
100 kHz Max 25°C
125°C
200°C
T500X227(1)010(2)G(3)10 22 220 10 250 812 325
81
T500X107(1)016(2)G(3)10
16
160
8
250 812 325
81
T500X336(1)035(2)G(3)10 11.6
116
8
600 524 210
52
(1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates capacitance tolerance.
(2) To complete KEMET part number, insert B (0.1%/1,000 hours) or A = N/A. Designates reliability level.
(3) To complete KEMET part number, insert 61 = None, 62 = 10 cycles +25°C after Weibull, 63 = 10 cycles -55°C +85°C after Weibull. Designates surge current
option.
Refer to Ordering Information for additional detail.
15
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
Roll Over for
Order Info.
T2063_T500 • 4/1/2013 5
datasheet pdf - http://www.DataSheet4U.net/
5 Page 
High Temperature MnO2 Tantalum Surface Mount Capacitors – T500 200°C Rated MnO2 Series
Figure 1 – Embossed (Plastic) Carrier Tape Dimensions
T P2
T2
ØDo
Po [10 pitches cumulative
tolerance on tape ± 0.2 mm]
E1
Ko
B1
Ao
Bo
F
W
E2
S1 P1
T1
Cover Tape
Center Lines of Cavity
ØD1
B1 is for tape feeder reference only,
including draft concentric about B o.
User Direction of Unreeling
Embossment
For cavity size,
see Note 1 Table 4
Table 4 – Embossed (Plastic) Carrier Tape Dimensions
Metric will govern
Tape Size
D0
8 mm
12 mm
16 mm
1.5 +0.10/-0.0
(0.059 +0.004/-0.0)
D1 Minimum
Note 1
1.0
(0.039)
1.5
(0.059)
Constant Dimensions — Millimeters (Inches)
E1
1.75 ±0.10
(0.069 ±0.004)
P0
http://www.DataSheet4U.net/
P2
4.0 ±0.10
2.0 ±0.05
(0.157 ±0.004) (0.079 ±0.002)
R Reference
Note 2
25.0
(0.984)
30
(1.181)
S1 Minimum
Note 3
T Maximum T1 Maximum
0.600
(0.024)
0.600
(0.024)
0.100
(0.004)
Tape Size
Pitch
8 mm
12 mm
16 mm
Single (4 mm)
Single (4 mm) &
Double (8 mm)
Triple (12 mm)
B1 Maximum
Note 4
4.35
(0.171)
8.2
(0.323)
12.1
(0.476)
Variable Dimensions — Millimeters (Inches)
E2 Minimum
6.25
(0.246)
10.25
(0.404)
14.25
(0.561)
F
3.5 ±0.05
(0.138 ±0.002)
5.5 ±0.05
(0.217 ±0.002)
5.5 ±0.05
(0.217 ±0.002)
P1
4.0 ±0.10
(0.157 ±0.004)
8.0 ±0.10
(0.315 ±0.004)
8.0 ±0.10
(0.315 ±0.004)
T2 Maximum
2.5
(0.098)
4.6
(0.181)
4.6
(0.181)
W Maximum
8.3
(0.327)
12.3
(0.484)
16.3
(0.642)
A0,B0 & K0
Note 5
1. The embossment hole location shall be measured from the sprocket hole controlling the location of the embossment. Dimensions of embossment location and
hole location shall be applied independent of each other.
2. The tape, with or without components, shall pass around R without damage (see Figure 5).
3. If S1 < 1.0 mm, there may not be enough area for cover tape to be properly applied (see EIA Standard 481–D, paragraph 4.3, section b).
4. B1 dimension is a reference dimension for tape feeder clearance only.
5. The cavity defined by A0, B0 and K0 shall surround the component with sufficient clearance that:
(a) the component does not protrude above the top surface of the carrier tape.
(b) the component can be removed from the cavity in a vertical direction without mechanical restriction, after the top cover tape has been removed.
(c) rotation of the component is limited to 20° maximum for 8 and 12 mm tapes and 10° maximum for 16 mm tapes (see Figure 2).
(d) lateral movement of the component is restricted to 0.5 mm maximum for 8 mm and 12 mm wide tape and to 1.0 mm maximum for 16 mm tape (see Figure 3).
(e) see Addendum in EIA Standard 481–D for standards relating to more precise taping requirements.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2063_T500 • 4/1/2013 11
datasheet pdf - http://www.DataSheet4U.net/
11 Page | ||
| Páginas | Total 17 Páginas | |
| PDF Descargar | [ Datasheet T500X336K035.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| T500X336K035 | Tantalum Surface Mount Capacitors | KEMET |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |