Datenblatt-pdf.com


T500X227K010 Schematic ( PDF Datasheet ) - KEMET

Teilenummer T500X227K010
Beschreibung Tantalum Surface Mount Capacitors
Hersteller KEMET
Logo KEMET Logo 




Gesamt 17 Seiten
T500X227K010 Datasheet, Funktion
High Temperature MnO2 Tantalum Surface Mount Capacitors
T500 200°C Rated MnO2 Series
Overview
The KEMET T500 Series is a high-temperature product that
offers optimum performance characteristics in applications with
operating temperatures up to 200°C.
Applications
Typical applications include decoupling and filtering in down-
hole, military and aerospace industries.
Benefits
• Meets or exceeds EIA standard 535BAAC
• Weibull failure rate option B
• Standard gold-plated termination
• RoHS Compliant
• Operating temperature range of -55˚C to +200˚C
• 100% steady-state accelerated aging at 200°C
• Voltage derating is 1/3 at 200°C
• Qualified at 1,000 hours of life test at 200°C with 0.33 VR
• Taped and reeled per EIA 481–1
• Meets MSL 1 requirements for Pb-free assembly according to
JEDEC J–STD–020
• Surge current options available
http://www.DataSheet4U.net/
SPICE
For a detailed analysis of specific part numbers, please visit www.kemet.com for a free download of KEMET's SPICE software.
The KEMET SPICE program is freeware intended to aid design engineers in analyzing the performance of these capacitors over
frequency, temperature, ripple, and DC bias conditions.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
One world. One KEMET
T2063_T500 • 4/1/2013 1
datasheet pdf - http://www.DataSheet4U.net/






T500X227K010 Datasheet, Funktion
High Temperature MnO2 Tantalum Surface Mount Capacitors – T500 200°C Rated MnO2 Series
Recommended Voltage Derating Guidelines
Rated
Voltage
+25°C
Working Voltage
+85°C
+125°C
+200°C
10 10 10 6.6 3.3
16 16 16 10.6 5.3
35 35 35 23.1 11.6
Note: Additional reliability can be obtained through the derating of voltage
120%
100%
80%
% Change in Working DC
Voltage with Temperature
60%
40%
20%
66%
50%
33%
0%
-55
25
85 125 175 200
Temperature (°C)
Ripple Current/Ripple Voltage
KEMET
Case Code
X
EIA
Case Code
7343–43
Maximum Power
Dissipation (P max)
mWatts @ 25°C
with +20°C Rise
165
Temperature Compensation Multipliers
for Maximum Power Dissipation
≤ 25°C
85°C
125°C
200°C
1.00 0.90 0.40 0.10
T= Environmental Temperature
http://www.DataSheet4U.net/
Using the P max of the device, the maximum allowable rms ripple
current or voltage may be determined.
I(max) = √P max/R
E(max) = √P max*R
I = rms ripple current (amperes)
E = rms ripple voltage (volts)
P max = maximum power dissipation (watts)
R = ESR at specified frequency (ohms)
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2063_T500 • 4/1/2013 6
datasheet pdf - http://www.DataSheet4U.net/

6 Page









T500X227K010 pdf, datenblatt
High Temperature MnO2 Tantalum Surface Mount Capacitors – T500 200°C Rated MnO2 Series
Packaging Information Performance Notes
1. Cover Tape Break Force: 1.0 Kg minimum.
2. Cover Tape Peel Strength: The total peel strength of the cover tape from the carrier tape shall be:
Tape Width
8 mm
12 and 16 mm
Peel Strength
0.1 to 1.0 Newton (10 to 100 gf)
0.1 to 1.3 Newton (10 to 130 gf)
The direction of the pull shall be opposite the direction of the carrier tape travel. The pull angle of the carrier tape shall be 165° to 180°
from the plane of the carrier tape. During peeling, the carrier and/or cover tape shall be pulled at a velocity of 300 ±10 mm/minute.
3. Labeling: Bar code labeling (standard or custom) shall be on the side of the reel opposite the sprocket holes. Refer to EIA
Standards 556 and 624.
Figure 2 – Maximum Component Rotation
°
T
Maximum Component Rotation
Top View
Typical Pocket Centerline
Tape
Maximum
Width (mm) Rotation ( )
Bo
8,12
20
16 – 200
10
Typical Component Centerline
Ao
Maximum Component Rotation
Side View
°
s
http://www.DataSheet4U.net/
Tape
Width (mm)
8,12
16 – 56
72 – 200
Maximum
Rotation ( )
20
10
5
Figure 3 – Maximum Lateral Movement
8 mm & 12 mm Tape
0.5 mm maximum
0.5 mm maximum
16 mm Tape
1.0 mm maximum
1.0 mm maximum
Figure 4 – Bending Radius
Embossed
Carrier
Punched
Carrier
Bending
R Radius
R
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2063_T500 • 4/1/2013 12
datasheet pdf - http://www.DataSheet4U.net/

12 Page





SeitenGesamt 17 Seiten
PDF Download[ T500X227K010 Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
T500X227K010Tantalum Surface Mount CapacitorsKEMET
KEMET

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche