|
|
PDF MT8MTF51264HSZ Data sheet ( Hoja de datos )
| Número de pieza | MT8MTF51264HSZ | |
| Descripción | 1.35V DDR3L-RS SDRAM SODIMM | |
| Fabricantes | Micron | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de MT8MTF51264HSZ (archivo pdf) en la parte inferior de esta página. Total 16 Páginas | ||
|
No Preview Available !
4GB (x64, SR) 204-Pin DDR3L-RS SODIMM
Features
1.35V DDR3L-RS SDRAM SODIMM
MT8MTF51264HSZ – 4GB
MT8MTF51264HRZ – 4GB
Features
• DDR3L-RS functionality and operations supported
as defined in the component data sheet
• 204-pin, small-outline dual in-line memory module
(SODIMM)
– Standard (front side) layout, PCB 1491, "HSZ"
– Reverse (back side) layout, PCB 1492, "HRZ"
• Fast data transfer rates: PC3-12800, PC3-10600
• 4GB (512 Meg x 64)
• VDD = 1.35V (1.283–1.45V)
• VDD = 1.5V (1.425–1.575V)
• Backward-compatible with standard 1.5V (±0.075V)
DDR3 systems
• VDDSPD = 3.0–3.6V
• Nominal and dynamic on-die termination (ODT) for
data, strobe, and mask signals
• Single-rank
• Fixed burst chop (BC) of 4 and burst length (BL) of 8
via the mode register set (MRS)
• Onboard I2C serial presence-detect (SPD) EEPROM
• Gold edge contacts
• Halogen-free
• Fly-by topology
• Terminated control, command, and address bus
Figure 1: 204-Pin SODIMMs
(MO-268 R/C G0, R/C H0)
Module height: 30mm (1.18in)
No components this side of module
PCB 1491, front side populated
Module height: 30mm (1.18in)
No components this side of module
PCB 1492, back side populated
Options
• Operating temperature
– Commercial (0°C ≤ TA ≤ +70°C)
• Package
http://www.DataSheet4U.net/
– 204-pin DIMM (halogen-free)
• Frequency/CAS latency
– 1.25ns @ CL = 11 (DDR3-1600)
– 1.5ns @ CL = 9 (DDR3-1333)
Marking
None
Z
-1G6
-1G4
Table 1: Key Timing Parameters
Speed
Grade
-1G6
-1G4
-1G1
-1G0
-80B
Industry
Nomenclature
PC3-12800
PC3-10600
PC3-8500
PC3-8500
PC3-6400
CL = 11 CL = 10
1600 1333
– 1333
––
––
––
Data Rate (MT/s)
CL = 9 CL = 8 CL = 7
1333 1066 1066
1333 1066 1066
– 1066 1066
– 1066 –
–––
CL = 6
800
800
800
800
800
CL = 5
667
667
667
667
667
tRCD
(ns)
13.125
13.125
13.125
15
15
tRP
(ns)
13.125
13.125
13.125
15
15
tRC
(ns)
48.125
49.125
50.625
52.5
52.5
PDF: 09005aef84fc0fd3
mtf8c512x64hz_g0_h0.pdf - Rev. B 02/13 EN
1 Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 2012 Micron Technology, Inc. All rights reserved.
Products and specifications discussed herein are subject to change by Micron without notice.
datasheet pdf - http://www.DataSheet4U.net/
1 page  
4GB (x64, SR) 204-Pin DDR3L-RS SODIMM
Pin Descriptions
Table 6: Pin Descriptions (Continued)
Symbol
SDA
TDQSx,
TDQSx#
Err_Out#
EVENT#
VDD
VDDSPD
VREFCA
VREFDQ
VSS
VTT
NC
NF
Type
I/O
Output
Output
(open drain)
Output
(open drain)
Supply
Supply
Supply
Supply
Supply
Supply
–
–
Description
Serial data: Used to transfer addresses and data into and out of the temperature sen-
sor/SPD EEPROM on the I2C bus.
Redundant data strobe (x8 devices only): TDQS is enabled/disabled via the LOAD
MODE command to the extended mode register (EMR). When TDQS is enabled, DM is
disabled and TDQS and TDQS# provide termination resistance; otherwise, TDQS# are
no function.
Parity error output: Parity error found on the command and address bus.
Temperature event: The EVENT# pin is asserted by the temperature sensor when crit-
ical temperature thresholds have been exceeded.
Power supply: 1.35V (1.283–1.45V) backward-compatible to 1.5V (1.425–1.575V). The
component VDD and VDDQ are connected to the module VDD.
Temperature sensor/SPD EEPROM power supply: 3.0–3.6V.
Reference voltage: Control, command, and address VDD/2.
Reference voltage: DQ, DM VDD/2.
Ground.
Termination voltage: Used for control, command, and address VDD/2.
No connect: These pins are not connected on the module.
No function: These pins are connected within the module, but provide no functional-
ity.
http://www.DataSheet4U.net/
PDF: 09005aef84fc0fd3
mtf8c512x64hz_g0_h0.pdf - Rev. B 02/13 EN
5 Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 2012 Micron Technology, Inc. All rights reserved.
datasheet pdf - http://www.DataSheet4U.net/
5 Page 
4GB (x64, SR) 204-Pin DDR3L-RS SODIMM
Electrical Specifications
Electrical Specifications
Stresses greater than those listed may cause permanent damage to the module. This is a
stress rating only, and functional operation of the module at these or any other condi-
tions outside those indicated in each device's data sheet is not implied. Exposure to ab-
solute maximum rating conditions for extended periods may adversely affect reliability.
Table 9: Absolute Maximum Ratings
Symbol
VDD
VIN, VOUT
Parameter
VDD supply voltage relative to VSS
Voltage on any pin relative to VSS
Min
–0.4
–0.4
Max
1.975
1.975
Units
V
V
Table 10: Operating Conditions
Symbol Parameter
Min
VDD VDD supply voltage
1.283
1.425
VREFCA(DC) Input reference voltage command/ address bus
VREFDQ(DC) I/O reference voltage DQ bus
IVTT Termination reference current from VTT
VTT Termination reference voltage (DC) – command/
address bus
0.49 × VDD
0.49 × VDD
–600
0.49 × VDD -
20mV
II Input leakage current;
Address in-
http://www.DataSheet4U.net/
–16
Any input 0V ≤ VIN ≤ VDD; VREF
puts, RAS#,
input 0V ≤ VIN ≤ 0.95V (All other CAS#, WE#, S#,
pins not under test = 0V)
CKE, ODT, BA,
CK, CK#
DM –2
IOZ Output leakage current;
DQ, DQS,
0V ≤ VOUT ≤ VDD; DQ and ODT are DQS#
disabled; ODT is HIGH
–5
IVREF
TA
TC
VREF supply leakage current; VREFDQ = VDD/2 or
VREFCA = VDD/2 (All other pins not under test = 0V)
Module ambient operating temperature
DDR3 SDRAM component case operating tempera-
ture
–8
0
0
Nom
1.35
1.5
0.5 × VDD
0.5 × VDD
–
0.5 × VDD
0
0
0
0
–
–
Max
1.45
1.575
0.51 × VDD
0.51 × VDD
600
0.51 × VDD +
20mV
16
Units
V
V
V
V
mA
V
Notes
1
2
µA
2
5 µA
8 µA
70 °C 3, 4
95 °C 3, 4 , 5
Notes:
1. Module is backward-compatible with 1.5V operation. Refer to device specification for
details and operation guidance.
2. VTT termination voltage in excess of the stated limit will adversely affect the command
and address signals’ voltage margin and will reduce timing margins.
3. TA and TC are simultaneous requirements.
4. For further information, refer to technical note TN-00-08: “Thermal Applications,”
available on Micron’s Web site.
5. The refresh rate is required to double when 85°C < TC ≤ 95°C.
PDF: 09005aef84fc0fd3
mtf8c512x64hz_g0_h0.pdf - Rev. B 02/13 EN
11
Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 2012 Micron Technology, Inc. All rights reserved.
datasheet pdf - http://www.DataSheet4U.net/
11 Page | ||
| Páginas | Total 16 Páginas | |
| PDF Descargar | [ Datasheet MT8MTF51264HSZ.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| MT8MTF51264HSZ | 1.35V DDR3L-RS SDRAM SODIMM | Micron |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |