Datenblatt-pdf.com


VO1263AB Schematic ( PDF Datasheet ) - Vishay

Teilenummer VO1263AB
Beschreibung Dual Photovoltaic MOSFET Driver Solid State Relay
Hersteller Vishay
Logo Vishay Logo 




Gesamt 7 Seiten
VO1263AB Datasheet, Funktion
www.DataSheet.co.kr
VO1263AAC/VO1263AACTR/VO1263AB
Vishay Semiconductors
Dual Photovoltaic MOSFET Driver Solid State Relay
DIP
8 76 5
SMD
1 23 4
i179020_1
– Control 1
+ Control 1
– Control 2
+ Control 2
– Output 1
+ Output 1
– Output 2
+ Output 2
DESCRIPTION
The VO1263AB/AAC photovoltaic MOSFET driver consists
of two LEDs optically coupled to two photodiode arrays. The
photodiode array provides a floating source with adequate
voltage and current to drive high-power MOSFET transistors.
Optical coupling provides a high I/O isolation voltage. In
order to turn the MOSFET off, an external resistance
(gate-to-source) is required for gate discharge.
FEATURES
• High open circuit voltage, up to 14.6 V typical
• High short circuit current, up to 42 µA typical
• Isolation test voltage 5300 VRMS
• Logic compatible input
• High reliability
• Lead (Pb)-free component
• Component in accordance to RoHS
2002/95/EC and WEEE 2002/96/EC
APPLICATIONS
• High-side driver
• Solid state relays
• Floating power supply
• Power control
• Data acquisition
• ATE
• Isolated switching
Note
See "solid state relays" (application note 56)
AGENCY APPROVALS
UL1577: file no. E52744 system code H or J, double
protection
DIN EN: 60747-5-5
CUL:
file no. E52744, equivalent to CSA bulletin 5A
ORDER INFORMATION
PART
VO1263AAC
VO1263AACTR
VO1263AB
REMARKS
Tubes
Tape and reel
Tubes
PACKAGE
SMD-8
SMD-8
DIP-8
ABSOLUTE MAXIMUM RATINGS (1)
PARAMETER
TEST CONDITION
SYMBOL
VALUE
UNIT
SSR
LED input ratings continous
forward current
IF 50 mA
LED input ratings reverse voltage
Photodiode array reverse voltage
Ambient operating temperature range
Storage temperature range
Pin soldering temperature (2)
Input to output isolation voltage
IR 10 µA
IR 2.0 µA
t = 7.0 s max.
t = 60 s min.
VR
VR
Tamb
Tstg
Tsld
VISO
5.0
100
- 40 to + 100
- 40 to + 150
270
5300
V
V
°C
°C
°C
VRMS
Notes
(1) Tamb = 25 °C, unless otherwise specified.
Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not
implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute maximum
ratings for extended periods of the time can adversely affect reliability.
(2) Refer to reflow profile for soldering conditions for surface mounted devices (SMD). Refer to wave profile for soldering conditions for through
hole devices (DIP).
Document Number: 84639
Rev. 1.6, 07-May-08
For technical questions, please contact: [email protected]
www.vishay.com
249
Datasheet pdf - http://www.DataSheet4U.net/






VO1263AB Datasheet, Funktion
www.DataSheet.co.kr
VO1263AAC/VO1263AACTR/VO1263AB
Vishay Semiconductors Dual Photovoltaic MOSFET Driver Solid
State Relay
OZONE DEPLETING SUBSTANCES POLICY STATEMENT
It is the policy of Vishay Semiconductor GmbH to
1. Meet all present and future national and international statutory requirements.
2. Regularly and continuously improve the performance of our products, processes, distribution and operating systems with
respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment.
It is particular concern to control or eliminate releases of those substances into the atmosphere which are known as ozone
depleting substances (ODSs).
The Montreal Protocol (1987) and its London Amendments (1990) intend to severely restrict the use of ODSs and forbid their use
within the next ten years. Various national and international initiatives are pressing for an earlier ban on these substances.
Vishay Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the use of ODSs listed in
the following documents.
1. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments respectively.
2. Class I and II ozone depleting substances in the Clean Air Act Amendments of 1990 by the Environmental Protection Agency
(EPA) in the USA.
3. Council Decision 88/540/EEC and 91/690/EEC Annex A, B and C (transitional substances) respectively.
Vishay Semiconductor GmbH can certify that our semiconductors are not manufactured with ozone depleting substances and do
not contain such substances.
We reserve the right to make changes to improve technical design
and may do so without further notice.
Parameters can vary in different applications. All operating parameters must be validated for each customer application by the
customer. Should the buyer use Vishay Semiconductors products for any unintended or unauthorized application, the buyer shall
indemnify Vishay Semiconductors against all claims, costs, damages, and expenses, arising out of, directly or indirectly, any
claim of personal damage, injury or death associated with such unintended or unauthorized use.
Vishay Semiconductor GmbH, P.O.B. 3535, D-74025 Heilbronn, Germany
www.vishay.com
254
For technical questions, please contact: [email protected]
Document Number: 84639
Rev. 1.6, 07-May-08
Datasheet pdf - http://www.DataSheet4U.net/

6 Page







SeitenGesamt 7 Seiten
PDF Download[ VO1263AB Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
VO1263AACDual Photovoltaic MOSFET Driver Solid State RelayVishay
Vishay
VO1263AACTRDual Photovoltaic MOSFET Driver Solid State RelayVishay
Vishay
VO1263ABDual Photovoltaic MOSFET Driver Solid State RelayVishay
Vishay

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche