DataSheet.es    


PDF LV5230BG Data sheet ( Hoja de datos )

Número de pieza LV5230BG
Descripción 7ch X 17ch LED Driver
Fabricantes Sanyo Semicon Device 
Logotipo Sanyo Semicon Device Logotipo



Hay una vista previa y un enlace de descarga de LV5230BG (archivo pdf) en la parte inferior de esta página.


Total 28 Páginas

No Preview Available ! LV5230BG Hoja de datos, Descripción, Manual

www.DataSheet.co.kr
Ordering number : ENA1741A
Bi-CMOS IC
LV5230BG 7ch×17ch LED Driver
Overview
The LV5230BG is a dot-matrix LED driver IC for cell phones.
Features
7×17 dot-matrix LED driver
(5×15 dot-matrix supported)
Each dot can be set for display over the serial bus.
Functions
LED driver
Column (anode) driving P-channel driver × 17 channels
Row (cathode ) driving N-channel driver × 7 channels
LED current per dot : 25mA maximum
Two flames of 7×17 (5×15) patterns can be set.
7 grayscale level adjustment on a dot basis (PWM duty factor switching)
Reverse display
Horizontal scroll (1 frame/2 frames)
Continuous/single scroll selectable
Vertical scroll (1 frame/2 frames)
Continuous/single scroll selectable
Automatic flashing can be specified per each dot
Interupt output at the end of scroll
Ring tone synchronization function
LED driving open drain output × 2
Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to
"standard application", intended for the use as general electronics equipment (home appliances, AV equipment,
communication device, office equipment, industrial equipment etc.). The products mentioned herein shall not be
intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace
instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety
equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case
of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee
thereof. If you should intend to use our products for applications outside the standard applications of our
customer who is considering such use and/or outside the scope of our intended standard applications, please
consult with us prior to the intended use. If there is no consultation or inquiry before the intended use, our
customer shall be solely responsible for the use.
Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate
the performance, characteristics, and functions of the described products in the independent state, and are not
guarantees of the performance, characteristics, and functions of the described products as mounted in the
customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent
device, the customer should always evaluate and test devices mounted in the customer's products or
equipment.
O0610 SY/60910 SY 20100427-S00005 No.A1741-1/28
Datasheet pdf - http://www.DataSheet4U.net/

1 page




LV5230BG pdf
www.DataSheet.co.kr
Block Diagram
LV5230BG
VBAT
OSC IREF
COUNTER
shift register
I/F level shift
I2C bus
control
PWM
LEDVDD
No.A1741-5/28
Datasheet pdf - http://www.DataSheet4U.net/

5 Page





LV5230BG arduino
www.DataSheet.co.kr
LV5230BG
I2C bus transmission method
Start and stop conditions
In the I2C bus, SDA must basically be kept in the constant state while SCL is “H” as shown below during data
transfer.
SCL
SDA
ts2
th2
When data transfer is not made, both SCL and SDA are in the “H” state.
When SCL = SDA = “H”, change of SDA from “H” to “L” enables the start conditions to start access.
When SCL is “H”, change of SDA from “L” to “H” enables the stop conditions to stop access.
Start condition
SCL
SDA
th1
Stop condition
(CTL=H)
ts3
No.A1741-11/28
Datasheet pdf - http://www.DataSheet4U.net/

11 Page







PáginasTotal 28 Páginas
PDF Descargar[ Datasheet LV5230BG.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
LV5230BG7ch X 17ch LED DriverSanyo Semicon Device
Sanyo Semicon Device

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar