Datenblatt-pdf.com


PU65-30 Schematic ( PDF Datasheet ) - PROTEK

Teilenummer PU65-30
Beschreibung 65 WATT SWITCHING POWER SUPPLIES
Hersteller PROTEK
Logo PROTEK Logo 




Gesamt 2 Seiten
PU65-30 Datasheet, Funktion
www.DataSheet4U.net
PROTEK 50-65 WATT SWITCHING POWER SUPPLIES
DESCRIPTION
The PU65 series of compact, open PCB constructed,
AC-DC switching power supplies are capable of delivering
50 to 65 watts of continuous output power. They operate at
85 to 264VAC input voltage without the need of voltage
selection. They are ideally suited for use in today’s CRT
terminals, disc drive systems, microprocessor based
systems, portable equipment and many other applications.
All models meet the safety requirements of UL, CSA and
IEC.
PU65 SERIES
(LVD)
RoHS
FE AT U R E S
Recognized or certified by UL, CSA and TÜV
Small size, light weight
100% burn-in
Wide input range 85 to 264VAC
Input surge current protection
Overvoltage protection
Overcurrent protection
Compliant with RoHS requirements
IN PUT S P EC IF IC AT IO NS
Input voltage
Input frequency
Input current
Earth leakage current:
(Touch current)
85 to 264VAC
47 to 63Hz
1.60Armsfor 115VAC
1.00Armsfor 230VAC
0.47mA max. @ 115VAC, 60Hz
0.85mA max. @ 230VAC, 50Hz
OUTPUT SPECIFICATIONS
Output voltage/currentSee rating chart
Total output power
Ripple and noise
Overvoltage protection
Overcurrent protection
Temperature coefficient
Transient response
65 watts maximum
1peak to peak maximum
Provided on output #1 only; set at
112-132of its nominal output
voltage
All outputs protected to short
circuit conditions
All outputs ±0.04/maximum
Maximum excursion of 4or
better on all models, recovering to
1of final value within 500us
after a 25step load change
EN V IR O NM ENTAL S P EC IF IC AT IO N S
Operating temperature
Storage temperature
Relative humidity
Derating
0to +70
-40to +85
5to 95non-condensing
Derate from 100at +50
linearly to 50at +70
1-5
Safety Standard Approvals
UL 60950-1
File No. E137410
CSA C22.2 No. 60950-1
File No. LR93632
TÜV EN60950-1
Certificate No. R9172041
GENERAL SPECIFICATIONS
Switching frequency:
E f f i c i e n c y:
Hold-up time:
32KHz ± 5KHz
70minimum on single output models
withVo 12V, 65% minimum on the
others
10 msec minimum at 110VAC
Line regulation:
Inrush current:
±0.5maximum at full load
15 amps @ 115VAC or 30 amps
@ 230VAC, at 25cold start
Withstand voltage:
3000VAC from input to output
1500VAC from input to ground
500VAC from output to ground
MTBF:
400,000 hours minimum at full load at
25ambient, calculated per
MIL-HDBK-217F
EMC Performance (EN55024)
EN55022:
FCC:
VCCI:
EN61000-3-2:
EN61000-3-3:
EN61000-4-2:
EN61000-4-3:
Class B conducted, class B radiated
Class B conducted, class B radiated
Class B conducted, class B radiated
Harmonic distortion, class A
Line flicker
ESD, ± 8KV air and ± 4KV contact
Radiated immunity, 3V/m
EN61000-4-4:
Fast transient/burst, ± 1KV
EN61000-4-5:
Surge, ± 1KV diff., ± 2KV com.
EN61000-4-6:
Conducted immunity, 3Vrms
EN61000-4-8:
E N 6 1 0 0 0 - 4 - 11 :
Magnetic field immunity, 1A/m
Voltage dips, 30% reduction for
500ms and >95% reduction for 10ms





SeitenGesamt 2 Seiten
PDF Download[ PU65-30 Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
PU65-3065 WATT SWITCHING POWER SUPPLIESPROTEK
PROTEK
PU65-3165 WATT SWITCHING POWER SUPPLIESPROTEK
PROTEK
PU65-3265 WATT SWITCHING POWER SUPPLIESPROTEK
PROTEK
PU65-3365 WATT SWITCHING POWER SUPPLIESPROTEK
PROTEK
PU65-35-165 WATT SWITCHING POWER SUPPLIESPROTEK
PROTEK

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche