|
|
Teilenummer | HCPL-0300 |
|
Beschreibung | (HCPL-0300 / HCPL-2300) 8 MBd Low Input Current Optocoupler | |
Hersteller | AVAGO TECHNOLOGIES | |
Logo | ||
Gesamt 14 Seiten HCPL-2300, HCPL-0300
8 MBd Low Input Current Optocoupler
Data Sheet
Lead (Pb) Free
RoHS 6 fully
compliant
RoHS 6 fully compliant options available;
-xxxE denotes a lead-free product
Description
The HCPL-2300/HCPL-0300 optocoupler combines
an 820 nm AlGaAs photon emitting diode with an
integrated high gain photon detector. This combina-tion
of Avago designed and manufactured semiconductor
devices brings new high performance capabilities to
designers of isolated logic and data communication cir-
cuits.
The new low current, high speed AlGaAs emitter manu-
factured with a unique diffused junction, has the virtue
of fast rise and fall times at low drive currents. Figure 6 il-
lustrates the propagation delay vs. input current charac-
teristic. These unique characteristics enable this device
to be used in an RS-232-C interface with ground loop iso-
lation and improved common mode rejection. As a line
receiver, the HCPL-2300/HCPL-0300 will operate over
longer line lengths for a given data rate because of lower
IF and VF specifications.
Functional Diagram
NC 1
8 VCC
ANODE 2
7 RL
CATHODE 3
6 VOUT
Features
• Guaranteed low thresholds: IF = 0.5 mA, VF ≤ 1.5 V
• High speed: guaranteed 5 MBd over temperature
• Versatile: compatible with TTL, LSTTL and CMOS
• Efficient 820 nm AlGaAs LED
• Internal shield for guaranteed common mode
rejection
• Schottky clamped, open collector output with
optional integrated pull-up resistor
• Static and dynamic performance guaranteed from
-40°C to 85°C
• Safety approval
– UL recognized -3750 V rms for 1 minute
– CSA approved
– IEC/EN/DIN EN 60747-5-2 approved with
VIORM = 630 V peak (Option 060)
Applications
• Ground loop elimination
• Computer-peripheral interfaces
• Level shifting
• Microprocessor system interfaces
• Digital isolation for A/D, D/A conversion
• RS-232-C interface
• High speed, long distance isolated line receiver
NC 4
5 GND
A 0.1 pF bypass capacitor must be connected between pins 5 and 8.
www.DataSheet4U.net
CAUTION: It is advised that normal static precautions be taken in handling and assembly
of this component to prevent damage and/or degradation which may be induced by ESD.
IEC/EN/DIN EN 60747-5-2 Insulation Related Characteristics (HCPL-2300 Option 060 only)
Description
Installation classification per DIN VDE 0110/1.89, Table 1
for rated mains voltage ≤300 V rms
for rated mains voltage ≤450 V rms
Climatic Classification
Pollution Degree (DIN VDE 0110/1.89)
Maximum Working Insulation Voltage
Input to Output Test Voltage, Method b*
VPaIOrRtMiaxl 1D.8is7c5ha=rgVePR,<1500p%C Production Test with tm = 1 sec,
Input to Output Test Voltage, Method a*
VPaIOrRtMiaxl
1D.5isc=hVaPrRg, eTy<p5e
and
pC
sample
test,
tm
=
60
sec,
Highest Allowable Overvoltage*
(Transient Overvoltage, tini = 10 sec)
Safety Limiting Values
(Maximum values allowed in the event of a failure,
also see Figure 11, Thermal Derating curve.)
Case Temperature
Input Current
Output Power
Insulation Resistance at TS, VIO = 500 V
Symbol
VIORM
VPR
VPR
VIOTM
TS
IS,INPUT
PS,OUTPUT
RS
Characteristic
I-IV
I-III
55/85/21
2
630
1181t
945
6000
175
230
600
≥109
Units
V peak
V peak
V peak
V peak
°C
mA
mW
Ω
*Refer to the front of the optocoupler section of the current catalog, under Product Safety Regulations section, IEC/EN/DIN EN 60747-5-2, for a
detailed description.
Note:
Isolation characteristics are guaranteed only within the safety maximum ratings which must be ensured by protective circuits in application.
Absolute Maximum Ratings
(No Derating Required up to 55°C)
Description
Storage Temperature
Operating Temperature
Lead Solder Temperature
(1.6 mm below seating plane)
Average Forward Input Current
Reverse Input Voltage
Supply Voltage
Pull-Up Resistor Voltage
Output Collector Current
Input Power Dissipation
Output Collector Power Dissipation
Output Collector Voltage
Min.
-55°C
-40°C
0V
-0.5 V
-25 mA
-0.5 V
Typ.
260°C for 10 s
5 mA[2]
10 mW
40 mW
Max.
+125°C
+85°C
3.0 V
7.0 V
VCC
25 mA
18 V
Units
TS
TA
max
- IF
VR
VCC
VRL
IO
PI
PO
VO
Infrared and Vapor Phase Reflow Temperature (Option #300) see Fig. 1, Thermal Profile
6 Page HCPL-2300/
HCPL-0300
HCPL-2300/
HCPL-0300
Figure 13. Active CMOS series drive circuit.
Figure 14. Series drive from open collector TTL/LSTTL units.
HCPL-2300/
HCPL-0300
REFERENCE FIGURE 17 FOR DATA RATE vs. LINE DISTANCE L.
Figure 15. Application of HCPL-2300/HCPL-0300 as isolated, unbalanced line receiver(s).
11
12 Page | ||
Seiten | Gesamt 14 Seiten | |
PDF Download | [ HCPL-0300 Schematic.PDF ] |
Teilenummer | Beschreibung | Hersteller |
HCPL-0300 | (HCPL-0300 / HCPL-2300) 8 MBd Low Input Current Optocoupler | Agilent |
HCPL-0300 | (HCPL-0300 / HCPL-2300) 8 MBd Low Input Current Optocoupler | AVAGO TECHNOLOGIES |
HCPL-0302 | (HCPL-3020 / HCPL-0302) 0.4 Amp Output Current IGBT Gate Drive Optocoupler | Avago |
Teilenummer | Beschreibung | Hersteller |
CD40175BC | Hex D-Type Flip-Flop / Quad D-Type Flip-Flop. |
Fairchild Semiconductor |
KTD1146 | EPITAXIAL PLANAR NPN TRANSISTOR. |
KEC |
www.Datenblatt-PDF.com | 2020 | Kontakt | Suche |