Datenblatt-pdf.com


FinePix-S5500 Schematic ( PDF Datasheet ) - Fujifilm

Teilenummer FinePix-S5500
Beschreibung Manual
Hersteller Fujifilm
Logo Fujifilm Logo 




Gesamt 30 Seiten
FinePix-S5500 Datasheet, Funktion
www.DataSheet4U.net
1 Getting Ready
2 Using
the Camera
3 Advanced
Features
4 Settings
5 Software
Installation
6 Viewing Images
OWNER’S MANUAL
This manual will show you how to use your
FUJIFILM DIGITAL CAMERA FinePix S5100/FinePix S5500 correctly.
Please follow the instructions carefully.
BL00416-200 (1)






FinePix-S5500 Datasheet, Funktion
1 Getting Ready ATTACHING THE LENS CAP / STRAP / ADAPTER RING
1 Attach the strap to the strap mounts on the camera.
Once you have attached both ends of the strap,
check carefully to make sure that the strap is firmly
secured.
! Attach the strap correctly to avoid dropping the camera.
2 Pull the lens cap cord through the strap.
! Attach the lens cap cord to prevent losing the lens cap.
3 Screw the adapter ring in the direction of the arrow
to mount it on the camera.
Mount the adapter ring on the camera at all times.
This setting blocks unwanted external light,
protects the lens and allows the optional
conversion lens to be attached.
4 Attaching the lens cap
To prevent the lens cap from appearing in the shot
when you take pictures, attach the lens cap to the
strap.
Attach the lens cap to the lens by pressing in on
each side of the cap.
LOADING THE BATTERIES
Compatible batteries
h AA-size alkaline batteries (LR6) (4), or AA-size Ni-MH batteries (HR-AA) (4) (sold separately).
! Please use the same brand and grade AA-size alkaline batteries as those supplied with the camera.
How to use the batteries
h Never use the following types of batteries, as this could cause serious
problems such as battery fluid leakage or overheating:
Outer casing
1. Batteries with split or peeling outer casings
2. Combinations of different types of batteries or new and used batteries
together
h Do not use manganese or Ni-Cd batteries.
h Soil, such as fingermarks on the poles of the batteries can shorten time for which the batteries
can be used.
h The time for which AA-size alkaline batteries (referred to hereafter simply as alkaline batteries)
can be used varies depending on the brand. Some alkaline batteries may stop providing power
more quickly than those supplied with the camera. Note also that due to their nature, the time for
which alkaline batteries can be used decreases in cold conditions (0°C to +10°C/+32°F to +50°F).
The use of AA-size Ni-MH batteries is better for this reason.
h Use Fujifilm Battery charger (sold separately) to charge AA-size Ni-MH batteries.
h See P.107-108 for other notes on using batteries.
h When first purchased or if left unused for a long period, the amount of time which AA-size
Ni-MH batteries can be used may be short. See P.108 for more information.
1
1 Check that the camera is turned off (indicator lamp
is off) before opening the battery cover.
! If opening the battery cover while the camera is still on, the
camera will turn off.
! Do not apply force to the battery cover.
Do not open the battery cover while the camera is
on. This could damage the xD-Picture Card or ruin
the image files on the xD-Picture Card.
2 01
02 03
1 Load the batteries correctly as indicated by the
polarity icons.
2 Press on the battery cover to push the batteries
down.
3 Slide the battery cover closed.
10 11

6 Page









FinePix-S5500 pdf, datenblatt
PHOTOGRAPHY MODE TAKING PICTURES (B AUTO MODE)
9 Frame the shot so that the subject fills the entire AF
(Autofocus) frame.
AF frame
10 Bebeep
! When the subject is not in the AF frame, use AF/AE lock to
take the picture (P.25).
Press the shutter button down halfway. When a
short double-beep is heard, the camera focuses on
your subject. The AF frame on the screen becomes
smaller and the camera sets the shutter speed and
aperture. The indicator lamp (green) changes from
blinking to lit.
! The image shown on the screen before the picture is taken
may differ in brightness, color, etc. from the image actually
recorded. Play back the recorded image to check it (P.27).
! When a short double-beep is not heard and “{” appears on
the screen, the camera cannot focus.
! Pressing the shutter button down halfway freezes the image
on the screen briefly. This image is not the recorded image.
! If “{” appears on the screen (e.g. the shot is too dark for
the camera to focus), try standing about 2 m (6.6 ft.) from the
subject to take the picture.
Before the flash fires, “” appears on the screen.
11
Click
Press the shutter button down fully. When a
clicking noise is heard, the camera records the
image.
! There is a slight delay between the shutter button being
pressed and the picture being taken. Playback the shot to
check the image.
! When pressing the shutter button down fully in one motion,
the picture is taken without the AF frame changing.
! When the camera takes the picture, the indicator lamp lights
orange (shooting disabled). The indicator lamp then turns
green and the next picture can be taken.
! The indicator lamp blinks orange while the flash is charging.
The screen may go dark briefly. This is normal.
! See P.111-112 for information on the warning displays.
Subjects not suitable for autofocus
The FinePix S5100/FinePix S5500 uses a high-precision autofocusing mechanism. However, it may
have difficulty focusing on the following:
h Very shiny subjects such as a mirror or car
body
h Subjects photographed through glass
walls or subjects dressed in the same color as
the background)
h Shots where another high-contrast object (not
h Subjects that do not reflect well, such as hair
the subject) is close to the AF frame and is
or fur
either closer or further away than your subject
h Subjects with no substance, such as smoke or
flames
h Dark subjects
(such as a shot of someone against a
background with strongly contrasting
elements)
h Fast moving subjects
h Subjects with little or no contrast between the
subject and the background (such as white
For such subjects use AF/AE lock (P.25).
22
USING LCD MONITOR
1
When using the LCD monitor to take pictures,
press the “EVF/LCD” button to select the LCD
monitor.
2 Brace your elbows against your sides and hold the
camera with both hands. Position your right thumb
so that it is handy for using the zoom.
! Moving the camera while shooting gives a blurred picture
(camera shake). Use a tripod to prevent camera shake,
particularly for shots in the dark when the selected flash
mode is Suppressed flash.
! There may be some uneven brightness at the lower edge of
the screen. This is normal and does not affect the image.
2
3 Frame the shot so that the subject fills the entire AF
(Autofocus) frame.
AF frame
! The image shown on the LCD monitor before the picture is
taken may differ in brightness, color, etc. from the image
actually recorded. Play back the recorded image to check it
(P.27).
Indicator lamp display
Display
Status
Lit green
Ready to shoot
Blinking green
AF/AE in progress, camera shake warning or AF warning (ready to shoot)
Blinking green and
orange alternately
Recording to xD-Picture Card (ready to shoot)
Lit orange
Recording to xD-Picture Card (not ready)
Blinking orange
Charging the flash (flash will not fire)
Blinking green
(1-second intervals)
Camera in Power save mode (P.82)
Blinking red
i xD-Picture Card Warnings
No card loaded, card not formatted, incorrect format, card full or xD-Picture Card error
i Lens operation error
Detailed warning messages appear on the screen (P.111-112).
23

12 Page





SeitenGesamt 30 Seiten
PDF Download[ FinePix-S5500 Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
FinePix-S5500ManualFujifilm
Fujifilm

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche