DataSheet.es    


PDF LV0220CS Data sheet ( Hoja de datos )

Número de pieza LV0220CS
Descripción Monolithic Linear IC
Fabricantes Sanyo Semicon Device 
Logotipo Sanyo Semicon Device Logotipo



Hay una vista previa y un enlace de descarga de LV0220CS (archivo pdf) en la parte inferior de esta página.


Total 5 Páginas

No Preview Available ! LV0220CS Hoja de datos, Descripción, Manual

Ordering number : ENA1293
LV0220CS
Monolithic Linear IC
For Optical Pickups
Front Monitor OE-IC
Overview
The LV0220CS is a front monitor optoelectronic IC for optical pickups that has a built-in photo diode compatible with
three waveforms. A high-speed process is adopted, and high sensitivity and high reliability are obtained with 405nm AR
coating cover glass. Moreover, LV0220CS is small size and thin type CSP packages.
Functions
I-V amplifier with a built -in PIN type photo detector (φ = 0.7mm) that supports three wavelengths
Differential output amplifier
Mode switching (BD/DVD/CD gain, volume output switching)
Specifications
Absolute Maximum Ratings at Ta = 25°C
Parameter
Symbol
Maximum supply voltage
Allowable power dissipation
VCC max
Pd max
Ta 75°C *
Operating temperature
Topr
Storage temperature
Tstg
* Mounted on a specified board: 20mm × 20mm × 1.6mm, glass epoxy board.
Conditions
Ratings
6
92
-10 to +75
-40 to +85
Unit
V
mW
°C
°C
www.DataSheet4U.net
Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to
"standard application", intended for the use as general electronics equipment (home appliances, AV equipment,
communication device, office equipment, industrial equipment etc.). The products mentioned herein shall not be
intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace
instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety
equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case
of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee
thereof. If you should intend to use our products for applications outside the standard applications of our
customer who is considering such use and/or outside the scope of our intended standard applications, please
consult with us prior to the intended use. If there is no consultation or inquiry before the intended use, our
customer shall be solely responsible for the use.
Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate
the performance, characteristics, and functions of the described products in the independent state, and are not
guarantees of the performance, characteristics, and functions of the described products as mounted in the
customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent
device, the customer should always evaluate and test devices mounted in the customer's products or
equipment.
82008 MS PC 20080414-S00002 No.A1293-1/5

1 page




LV0220CS pdf
LV0220CS
Photo-receiver Layout
PD aperture size φ = 0.7mm
The center of PD corresponds to the center of the package
Top view
unit:mm
0.5
Marker
0.1
Marker
φ 0.1
φ0.7
0.4
1.4
1.91 0.6
www.DataSheet4U.net
SANYO Semiconductor Co.,Ltd. assumes no responsibility for equipment failures that result from using
products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition
ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor Co.,Ltd.
products described or contained herein.
SANYO Semiconductor Co.,Ltd. strives to supply high-quality high-reliability products, however, any and all
semiconductor products fail or malfunction with some probability. It is possible that these probabilistic failures or
malfunction could give rise to accidents or events that could endanger human lives, trouble that could give rise
to smoke or fire, or accidents that could cause damage to other property. When designing equipment, adopt
safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not
limited to protective circuits and error prevention circuits for safe design, redundant design, and structural
design.
In the event that any or all SANYO Semiconductor Co.,Ltd. products described or contained herein are
controlled under any of applicable local export control laws and regulations, such products may require the
export license from the authorities concerned in accordance with the above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise,
without the prior written consent of SANYO Semiconductor Co.,Ltd.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the
SANYO Semiconductor Co.,Ltd. product that you intend to use.
Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed
for volume production.
Upon using the technical information or products described herein, neither warranty nor license shall be granted
with regard to intellectual property rights or any other rights of SANYO Semiconductor Co.,Ltd. or any third
party. SANYO Semiconductor Co.,Ltd. shall not be liable for any claim or suits with regard to a third party's
intellctual property rights which has resulted from the use of the technical information and products mentioned
above.
This catalog provides information as of August, 2008. Specifications and information herein are subject
to change without notice.
PS No.A1293-5/5

5 Page










PáginasTotal 5 Páginas
PDF Descargar[ Datasheet LV0220CS.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
LV0220CSMonolithic Linear ICSanyo Semicon Device
Sanyo Semicon Device

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar