|
|
Número de pieza | GL100MN1MP | |
Descripción | High Power Output Infrared Emitting Diode | |
Fabricantes | Sharp Electrionic Components | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de GL100MN1MP (archivo pdf) en la parte inferior de esta página. Total 11 Páginas | ||
No Preview Available ! GL100MN1MPx
GL100MN1MPx Surface Mount Type, High Power
Output Infrared Emitting Diode
■ Features
1. Compact and thin SMD package
2. Top view and side view mountable
3. Plastic mold with resin lens
4. Peak emission wavelength: 940 nm TYP.
5. Narrow directivity angle (Δθ ±10° TYP.)
6. High power output (φ e: 6.0 mW MAX.)
7. Lead free and RoHS directive compliant
■ Model Line-up
Model No.
GL100MN1MP
GL100MN1MP1
Packaging
2000 pcs/reel
1500 pcs/reel
Mount Direction
Side view
Top view
■ Agency Approvals/Compliance
1. Compliant with RoHS directive (2002/95/EC)
2. Content information about the six substances
specified in “Management Methods for Control of
Pollution Caused by Electronic Information Prod-
ucts Regulation” (popular name: China RoHS)
(Chinese:
);
refer to page 7.
■ Applications
1. Office automation equipment
2. Audio visual equipment
3. Home appliances
4. Telecommunication equipment
5. Measuring equipment
6. Tooling machines
7. Computers
www.DataSheet4U.com
Notice The content of data sheet is subject to change without prior notice.
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP
devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
1 Sheet No.: D1-A00701EN
Date: November 30, 2007
©SHARP Corporation
1 page Fig. 7 Radiant Flux vs. Forward Current
100
Ta = 25°C
10
Pulse
(Pulse width ≤ 100 μs)
1
0.1
1
10 100
Forward current IF (mA)
1000
Fig. 8 Relative Output vs.
Distance to Detector
(Detector: PT100MF0MP)
100
IF = constant
Ta = 25°C
10
GL100MN1MPx
Fig. 9 Radiation Diagram (Typical Value)
-20° -10°
0° +10° +20°
100 Ta = 25°C
-30° +30°
80
-40° 60 +40°
-50° 40 +50°
-60° +60°
20
-70° +70°
-80° +80°
-90° +90°
0
Angular displacement θ
1
0.1
0.01
0.1
1 10 100
Distance to detector d (mm)
1000
www.DataSheet4U.com
Sheet No.: D1-A00701EN
5
5 Page GL100MN1MPx
■ Important Notices
· The circuit application examples in this publication are
provided to explain representative applications of
SHARP devices and are not intended to guarantee any
circuit design or license any intellectual property rights.
SHARP takes no responsibility for any problems
related to any intellectual property right of a third party
resulting from the use of SHARP’s devices.
· Contact SHARP in order to obtain the latest device
specification sheets before using any SHARP device.
SHARP reserves the right to make changes in the
specifications, characteristics, data materials, struc-
ture, and other contents described herein at any time
without notice in order to improve design or reliability.
Manufacturing locations are also subject to change
without notice.
· Observe the following points when using any devices
in this publication. SHARP takes no responsibility for
damage caused by improper use of the devices which
does not meet the conditions and absolute maximum
ratings to be used specified in the relevant specification
sheet nor meet the following conditions:
(i) The devices in this publication are designed for use
in general electronic equipment designs such as:
--- Personal computers
--- Office automation equipment
--- Telecommunication equipment (terminal)
--- Test and measurement equipment
--- Industrial control
--- Audio visual equipment
--- Consumer electronics
(ii) Measures such as fail-safe function and redundant
design should be taken to ensure reliability and safety
when SHARP devices are used for or in connection
with equipment that requires higher reliabilty such as:
--- Transportation control and safety equipment
(i.e., aircraft, trains, automobiles, etc.)
--- Traffic signals
--- Gas leakage sensor breakers
--- Alarm equipment
--- Various safety devices, etc.
(iii) SHARP devices shall not be used for or in connec-
tion with equipment that requires an extremely high
level of reliability and safety such as:
--- Space applications
--- Telecommunication equipment (trunk lines)
--- Nuclear power control equipment
--- Medical and other life support equipment (e.g.
scuba)
· If the SHARP devices listed in this publication fall
within the scope of strategic products described in the
Foreign Exchange and Foreign Trade Law of Japan, it
is necessary to obtain approval to export such SHARP
devices.
· This publication is the proprietary product of SHARP
and is copyrighted, with all rights reserved. Under the
copyright laws, no part of this publication may be repro-
duced or transmitted in any form or by any means,
electronic or mechanical, for any purpose, in whole or
in part, without the express written permission of
SHARP. Express written permission is also required
before any use of this publication may be made by a
third party.
· Contact and consult with a SHARP representative if
there are any questions about the contents of this pub-
lication.
www.DataSheet4U.com
Sheet No.: D1-A00701EN
11
11 Page |
Páginas | Total 11 Páginas | |
PDF Descargar | [ Datasheet GL100MN1MP.PDF ] |
Número de pieza | Descripción | Fabricantes |
GL100MN1MP | High Power Output Infrared Emitting Diode | Sharp Electrionic Components |
GL100MN1MP1 | High Power Output Infrared Emitting Diode | Sharp Electrionic Components |
GL100MN1MPx | High Power Output Infrared Emitting Diode | Sharp Electrionic Components |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |