|
|
Número de pieza | MIC61150 | |
Descripción | Low Input Voltage Single-Supply High-Current LDO | |
Fabricantes | MICREL | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de MIC61150 (archivo pdf) en la parte inferior de esta página. Total 22 Páginas | ||
No Preview Available ! MIC61150
Low Input Voltage, Single-Supply
High-Current LDO
General Description
Features
The Micrel MIC61150 is a 1.5A output, low input voltage,
single-supply regulator. This regulator operates over a
single input voltage range of 1.1V to 3.6V and offers an
ultra-low dropout less than 200mV over the entire
operating temperature range.
The MIC61150 is designed to drive digital circuits requiring
low voltages at high currents such as DSPs, FPGAs,
microcontrollers, etc. The regulator is available as a 1.0V
fixed-output voltage option or as an adjustable-output
voltage option.
The MIC61150 is stable with a 22µF, low-ESR ceramic
output capacitor, and includes protection features such as
thermal shutdown, current limiting and logic enable.
The MIC61150 is offered in two different packages: a low-
profile, leadless 10-pin 3mm x 3mm MLF® and a 10-pin
ePad MSOP. The MIC61150 has an operating junction
temperature range of −40°C to +125°C.
• Single VIN rail: 1.1V to 3.6V
• Output voltage accuracy: ±2.5% over temperature
• Typical dropout of 75mV at room temperature
– Maximum dropout of 200mV at full load over
temperature
• COUT as low as 22µF (ceramic capacitor)
• Output voltage adjustable down to 0.5V
• Soft-start control via external capacitor
• Excellent line and load regulation
• Logic controlled shutdown
• Thermal-shutdown and current-limit protection
• 10-pin 3mm × 3mm MLF® package
• 10-pin ePad MSOP package
• Junction temperature range from −40°C to +125°C
Data sheets and support documentation can be found on
Micrel’s web site at: www.micrel.com.
Applications
• Point-of-load applications
• ASIC / Microprocessor power supply
• FPGA power supply
• Telecom / Networking cards
• Wireless infrastructure
____________________________________________________________________________________________________________
Typical Application
www.DataSheet4U.com
Dropout Voltage
vs. Output Current
100
VIN = 1.5V
80 VFB = 0V
60 TA = 25ºC
40
20
0
0.0 0.5 1.0
1.5
OUTPUT CURRENT (A)
MLF and MicroLeadFrame are registered trademarks of Amkor Technology, Inc.
Micrel Inc. • 2180 Fortune Drive • San Jose, CA 95131 • USA • tel +1 (408) 944-0800 • fax + 1 (408) 474-1000 • http://www.micrel.com
November 2010
M9999-112210-A
1 page Micrel, Inc.
Typical Characteristics
Dropout Voltage
vs. Input Voltage
120
ADJUSTABLE OPTION
100 VFB = 0V
80 IOUT = 1.5A
60
40 IOUT = 750mA
20
0
1.0
IOUT = 100mA
1.5 2.0 2.5 3.0 3.5
INPUT VOLTAGE (V)
4.0
0.510
0.505
Feedback Voltage
vs. Input Voltage
VOUT = 1.0V
IOUT = 10mA
0.500
0.495
0.490
1
22334
INPUT VOLTAGE (V)
4
Short-Circuit Current
vs. Input Voltage
5
VOUT = 0V
4
3
2
1
0
1.0
1.5 2.0 2.5 3.0 3.5
INPUT VOLTAGE (V)
4.0
GND Pin Current
vs. Input Voltage
20
16 VIN = VOUT + 0.2V
IOUT = 1.5A
12
8
4
0
1.0
1.5 2.0 2.5 3.0 3.5
INPUT VOLTAGE (V)
4.0
Feedback Pin Current
vs. Input Voltage
30
25
IOUT = 0A
VFB = 0.5V
20
15
10
5
0
1.0
1.5 2.0 2.5 3.0 3.5
INPUT VOLTAGE (V)
4.0
Enable Pin Current
vs. Input Voltage
20
15
10 VOUT = 1.0V
IOUT = 10mA
5 VEN = 3.6V
0
1.0
1.5 2.0 2.5 3.0 3.5
INPUT VOLTAGE (V)
4.0
MIC61150
Shutdown Ground Current
vs. Input Voltage
1.0
0.8 VOUT = 0V
VEN = 0V
0.6
0.4
0.2
0.0
1.0
1.5 2.0 2.5 3.0 3.5
INPUT VOLTAGE (V)
4.0
Load Regulation
vs. Input Voltage
0.2
0.1
0.0
VOUT = 1.0V
-0.1 IOUT = 10mA to 1.5A
-0.2
1.0
1.5 2.0 2.5 3.0 3.5
INPUT VOLTAGE (V)
4.0
10.0
8.0
6.0
4.0
2.0
0.0
0
Charge Pump Voltage
vs. Input Voltage
VOUT = 0.5V
IOUT = 50mA
123
INPUT VOLTAGE (V)
4
www.DataSheet4U.com
November 2010
5 M9999-112210-A
5 Page Micrel, Inc.
Functional Diagram
MIC61150
Figure 1. MIC61150 Block Diagram – Fixed
www.DataSheet4U.com
November 2010
Figure 2. MIC61150 Block Diagram – Adjustable
11
M9999-112210-A
11 Page |
Páginas | Total 22 Páginas | |
PDF Descargar | [ Datasheet MIC61150.PDF ] |
Número de pieza | Descripción | Fabricantes |
MIC61150 | Low Input Voltage Single-Supply High-Current LDO | MICREL |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |