|
|
Teilenummer | MI0283QT-1 |
|
Beschreibung | LCD Module | |
Hersteller | MULTI-INNO TECHNOLOGY | |
Logo | ||
Gesamt 23 Seiten MULTI-INNO TECHNOLOGY CO., LTD.
LCD MODULE SPECIFICATION
Model : MI0283QT-1
www.DataSheet4U.com
Revision
Engineering
Date
Our Reference
1.0
MODULE NO.: MI0283QT-1
Ver 1.0
nELECTRO-OPTICAL CHARACTERISTICS
Item
Response time
Contrast ratio
Luminance
uniformity
Surface Luminance
Viewing angle range
Red
CIE (x, y) Green
chromaticity Blue
White
Symbol
Tr+Tf
Cr
d
WHITE
Lv
q
x
y
x
y
x
y
x
y
Condition
θ=0°
Æ=0°
Ta=25℃
Æ = 90°
Æ = 270°
Æ = 0°
Æ = 180°
θ=0°
Æ=0°
Ta=25℃
Min
---
337
75
159
70
55
63
61
0.5527
0.2998
0.2677
0.5187
0.0956
0.0318
0.2218
0.2423
Typ
27.7
674
83
199
80
65
73
71
0.6027
0.3498
0.3177
0.5687
0.1456
0.0818
0.2818
0.3023
Max
41.55
---
---
---
---
---
---
---
0.6527
0.3998
0.3677
0.6187
0.1956
0.1318
0.3418
0.3623
Unit
ms
---
%
cd/m2
deg
deg
deg
deg
Remark
FIG 1.
FIG 2.
FIG 2.
FIG 2.
FIG 3.
FIG 3.
FIG 3.
FIG 3.
Note
4
1
3
2
6
- FIG 2. 5
Note 1. Contrast Ratio(CR) is defined mathematically as For more information see FIG 2.:
Contrast Ratio =
Average Surface Luminance with all white pixels (P 1,P2, P 3,P4, P5)
Average Surface Luminance with all black pixels (P1, P2, P 3,P4, P5)
Note 2. Surface luminance is the LCD surface from the surface with all pixels displaying white. For more
information see FIG 2.
Lv = Average Surface Luminance with all white pixels (P1, P2, P 3,P4, P5)
Note 3. The uniformity in surface luminance , d WHITE is determined by measuring luminance at each test position 1
through 5, and then dividing the maximum luminance of 5 points luminance by minimum luminance of 5 points
luminance. For more information see FIG 2.
δ WHITE =
Minimum Surface Luminance with all white pixels (P1, P2, P 3,P4, P5)
Maximum Surface Luminance with all white pixels (P1, P2, P 3,P4, P5)
Note 4. Response time is the time required for the display to transition from White to black(Rise Time, Tr) and from
black to white(Decay Time, Tf). For additional information see FIG 1. The test equipment is Autronic-Melchers’s
ConoScope. Series
Note 5. CIE (x, y) chromaticity,The x,y value is determined by measuring luminance at each test position 1 through
5,and then make average value
Note 6. Viewing angle is the angle at which the contrast ratio is greater than 2. For TFT module the conrast ratio is
greater than 10. The angles are determined for the horizontal or x axis and the vertical or y axis with respect to the z
axis which is normal to the LCD surface. For more information see FIG 3.
www.DataSheet4U.com
Note 7. For Viewing
angle
and
response
time
testing,
the
testing
data
is
base
on
Autronic-Melchers’s
ConoScope.
Series
Instruments. For contrast ratio, Surface Luminance, Luminance uniformity,CIE The test data is base on TOPCON’s
BM-5 photo detector.
Note 8. For TFT module, Gray scale reverse occurs in the direction of panel viewing angle.
MULTI-INNO TECHNOLOGY CO.,LTD.
P.6
6 Page MODULE NO.: MI0283QT-1
3.
Dim Spots
Circle
shaped and
dim edged
defects
2. Zone
Size(mm)
Φ≤0.2
0.20<Φ≤0.40
0.40<Φ≤0.60
0.60<Φ
Acceptable Qty
AB
C
Ignore
2
Ignore
1
0
4.2 Cosmetic Defect
Item Items to be
No inspected
Line defect
Black line,
White line,
Foreign
material on
polarizer
Inspection Standard
size(mm)
L(Length)
W(Width)
Ignore
L≤3.0
L≤2.0
W≤0.02
0.02<W≤0.03
0.03<W≤0.05
Acceptable Qty
zone
AB
C
Ignore
2
1 Ignore
4.2.2
0.05<W
Define as spot
defect
The line can be seen after mobile phone in the operating
condition:
size(mm)
Acceptable Qty
Foreign
material on
TP film
L(Length)
Ignore
W(Width)
W≤0.03
zone
AB
Ignore
C
L≤5.0
0.03<W≤
0.05
3 Ignore
0.05<W
Define as spot defect
Ver 1.0
Minor
Classificatio
n of defects
Minor
www.DataSheet4U.com
If the scratch can be seen after mobile phone cover
assembling or in the operating condition, judge by the line
defect of 4.2.2.
If the scratch can be seen only in non-operating condition or
some special angle, judge by the following.
MULTI-INNO TECHNOLOGY CO.,LTD.
P.12
12 Page | ||
Seiten | Gesamt 23 Seiten | |
PDF Download | [ MI0283QT-1 Schematic.PDF ] |
Teilenummer | Beschreibung | Hersteller |
MI0283QT-1 | LCD Module | MULTI-INNO TECHNOLOGY |
MI0283QT-11 | LCD Module | MULTI-INNO TECHNOLOGY |
MI0283QT-2 | LCD Module | MULTI-INNO TECHNOLOGY |
MI0283QT-9A | LCD Module | MULTI-INNO TECHNOLOGY |
Teilenummer | Beschreibung | Hersteller |
CD40175BC | Hex D-Type Flip-Flop / Quad D-Type Flip-Flop. |
Fairchild Semiconductor |
KTD1146 | EPITAXIAL PLANAR NPN TRANSISTOR. |
KEC |
www.Datenblatt-PDF.com | 2020 | Kontakt | Suche |