DataSheet.es    


PDF EIA1111 Data sheet ( Hoja de datos )

Número de pieza EIA1111
Descripción High Power Capacitors (S42E Silver Series) Specification
Fabricantes Johanson Technology 
Logotipo Johanson Technology Logotipo



Hay una vista previa y un enlace de descarga de EIA1111 (archivo pdf) en la parte inferior de esta página.


Total 16 Páginas

No Preview Available ! EIA1111 Hoja de datos, Descripción, Manual

Johanson Technology, Inc.
4001 Calle Tecate, Camarillo, CA 93012
(805)-389-1166 www.johansontechnology.com
EIA 1111 High Power Capacitors (S42E Silver Series) Specification
1.0 Scope
This capacitor belongs to the Silver Series family and is based on SMD Multilayer Ceramic technology.
JTI uses nearly pure Silver electrodes while our competitors use Palladium electrodes. Silver is a much
superior conductor when compared to Palladium. JTI Silver Series provides customers with a significant
performance improvement and a more competitive cost. This specification is an in-depth look at the JTI
High-Q Silver Series MLCC product line for all authorized JTI personnel (this document is company
confidential). This document will educate the reader on all important aspects of High-Q capacitor
recognition, proper application and design utilization.
2.0
Applications
Communications amplifiers
Power converters
Filter Networks
Circuit Matching
Amplitude modulators
Antenna Matching, high power circuitry
Decoupling, Bypass, & DC Block
2.1 Market Segments (Typical End Applications)
The Silver Series products are used to improve the performance of nearly all high
frequency circuits. Below is a list of typical applications where Silver Series capacitors are
widely used:
High Power RF Systems
High Voltage RF Systems
Cellular Base Station Equipment
Medical MRI (Non-Magnetic)
RF Heater (Industrial) systems
Teat Equipment (Power Amplifiers)
Military Radar and Jamming Electronics
3.0 Features:
Excellent temperature dissipation (for High Power Temp Rise)
Excellent Power Handling Capabilities
High stability dielectric (NPO)
One of the best equivalent series resistance (ESR) of its kind due to newly-formulated internal
electrodes and low loss dielectrics Industry leading High-Q/Low loss COG (NPO) performance
Manufacturing controls that ensure consistency lot to lot and year to year
Green and RoHS compliance
www.DataShGeeot4lUd.c(oAmu), Non-Magnetic Copper (Cu), Tin (Sn and Sn/Pb and leaded terminations are available
EIA Marking is available
4.0 Basic Construction
Magnetic (Ni) and Non-Magnetic (Cu) Barrier Termination
DATE:
TITLE:
August 31st, 2009
Silver Series S42E MLCC Specification
Page 1 of 16
Subject to change without notice

1 page




EIA1111 pdf
Johanson Technology, Inc.
4001 Calle Tecate, Camarillo, CA 93012
(805)-389-1166 www.johansontechnology.com
EIA 1111 High Power Capacitors (S42E Silver Series) Specification
No Item
7 Humidity (Steady Insulation
State)
Resistance
MIL-STD-202
METHOD 103B
Voltage
Breakdown
8 Moisture Resistance Appearance
MIL-STD-202
Capacitance
Q
9 High Temperature
Resistance (Life)
MIL-STD-202
METHOD 108
Condition D
10 Temperature
Cycling
MIL-STD-202
Insulation
Resistance
Voltage
Breakdown
Appearance
Capacitance
Q
Insulation
Resistance
Voltage
Breakdown
Appearance
www.DataSheet4U.com
Performance
> 10 G
Test Condition
> 2.5 x WVDC Min.,
25°C,
50 mA Maximum
No Mechanical Damage
Within ± 7.5% or ± 0.75
pF whichever is larger
Q > 300
Minimum Insulation
Resistance: 1
> 2.5 x WVDC Min.,
25°C, 50 mA Maximum
No Mechanical Damage
Within ± 3% or ± 0.3pF
Whichever is larger
Q > 500
Minimum Insulation
Resistance: 1 G
> 2.5 x WVDC Min.,
25°C, 50 mA Maximum
No Mechanical Damage
Measured at room
temperature after cooling
for 24 ± 2 Hr.
Applied Voltage: 1.5
Volts
Temperature: 85 ± 2°C
Relative Humidity: 85 %
Test Time: 240 +12 / -0
Hr.
Current Applied: 50 mA
max.
Measured at room
temperature after cooling
for 24 ± 2 Hr.
Applied Voltage: 200%
of Rated Voltage
Test Time: 1000 +48 / -0
Hr.
Current Applied: 50 mA
MAX.
Temperature: 125 ± 3°C
Capacitors shall be
subjected to five (5)
cycles of temp cycle
profile:
Step 1.) Minimum rated
temperature
+0 / -3°C for 30 minutes
DATE:
TITLE:
August 31st, 2009
Silver Series S42E MLCC Specification
Page 5 of 16
Subject to change without notice

5 Page





EIA1111 arduino
Johanson Technology, Inc.
4001 Calle Tecate, Camarillo, CA 93012
(805)-389-1166 www.johansontechnology.com
EIA 1111 High Power Capacitors (S42E Silver Series) Specification
15.0 Recommended Land Pattern
Appropriate pad design, solder application, and component orientation are all ingredients of a quality,
defect-free soldering process. The Institute for Interconnecting and Packaging Electronic Circuits (IPC)
through IPC-7351A has endorsed Land Pattern Calculator program from PCB Matrix. (This land pattern
calculator can be downloaded at: http://www.pcbmatrix.com/Products/LPSoftware/LPCalculator/)
The following recommended land patterns are directly from this program. This standard presents industry
consensus on optimum dimensions based on empirical knowledge of fabricated land patterns. The
standard also contains an excellent analysis of solder joints and their relation to component, PCB, and
placement tolerances. (http://www.ipc.org).
Y
C
Y
X
JTI
Size
Code
S42
Figure 3 Land Pattern
Chip Size
C
Land X
Land Y
EIA
1111
Inches
(mm)
min
0.008
0.20
max
0.014
0.35
min
0.008
0.20
max
0.016
0.40
min
0.008
0.20
max
0.012
0.30
www.DataSheet4U.com
DATE:
TITLE:
August 31st, 2009
Silver Series S42E MLCC Specification
Page 11 of 16
Subject to change without notice

11 Page







PáginasTotal 16 Páginas
PDF Descargar[ Datasheet EIA1111.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
EIA1111High Power Capacitors (S42E Silver Series) SpecificationJohanson Technology
Johanson Technology
EIA1111-211.0-11.5 GHz 2-Watt Internally Matched Power FETExcelics Semiconductor
Excelics Semiconductor
EIA1111-611.0-11.5 GHz 6-Watt Internally Matched Power FETExcelics Semiconductor
Excelics Semiconductor
EIA1114-211.0-14.0 GHz 2-Watt Internally Matched Power FETExcelics Semiconductor
Excelics Semiconductor

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar