Datenblatt-pdf.com


XG4E Schematic ( PDF Datasheet ) - Omron Electronics

Teilenummer XG4E
Beschreibung Flat Cable Connectors
Hersteller Omron Electronics
Logo Omron Electronics Logo 




Gesamt 22 Seiten
XG4E Datasheet, Funktion
Flat Cable Connectors
XG4
Industry Standard Circuit Board
Connectors Conform to MIL Standards
• XG4M-U: Unique locking system, with lock levers on strain
relief / socket instead of on plug, saves 24% of space
• Space-saving Box-type Plugs (XG4C) available.
• Can be used with XG5 IDC Connectors for discrete wires, XG8
Original PCB Plugs, and the XG2 IDC Bus Connectors for PCBs.
• The Original Plugs (XG8) and the Box-type Plugs (XG4C)
can be locked using External XG5Z and XG4Z Lock Levers.
• Conforms to MIL standards (MIL-C-83503).
• UL recognition (file No. E103202)
Ordering Information
Connector
Strain relief
Feature
Cable
Socket
XG4M
XG4U
XG4T
Strain relief
Strain relief
with lock levers without lock levers
Plug
XG4E
XG4S
Lock levers on
connector
XG4A
---
Integral
lock levers
PCB
Plug
XG4A
XG4C
--- ---
2-tier
with lock levers
Box type plug
Socket
XG4H
---
Board to Board
Socket
Appearance
Note: 1. XG4M can be provided with or without the strain reliefs;
XG4M-U consists of XG4M-@@3@ socket +XG4U-@@04 strain relief
XG4M-T consists of XG4M-@@3@ socket + XG4T-@@04 strain relief
2. XG4H PCB mount socket mates with XG4C and XG8W (see XG8 Datasheet) for board to board connectivity without cables.
3. XG5 connectors (see XG5 Datasheet) use discrete wire instead of flat ribbon cable.
4. XG4A PCB mount sockets are available with Long, Short or no Lock Levers.
5. Optional XG4Z-001@ side-lock levers, purchased separately, are available for use with right-angle XG4A versions that don’t include them.
6. Optional XG4Z-0002 and XG5Z-0002 top-lock levers are available for mating XG4M(-T) sockets to XG4C and XG8 plugs.
Ratings and Characteristics
Item
Rated current
Rated voltage
Contact resistance
Insulation resistance
Dielectric strength
Connector insertion
Contact removal
Insertion durability
Ambient temperature
MIL Sockets: XG4M
Cable Plug: XG4E
MIL Plugs: XG4A
Box-type PCB Plugs: XG4C
Board to Board Sockets: XG4H
1 A 3 A (See note 1.)
250 VAC
300 VAC
20 mΩ max. (at 20 mV, 100 mA max.)
1,000 MΩ min. (at 500 VDC)
500 VAC for 1 min (leakage current: 1 mA max.)
1.96 N max. per contact
0.39 N min. (with test gauge, t= 0.64 mm)
50 times (See note 2.)
Operating: –55 to 105°C (with no icing)
Note: 1. The rated current will depend on the
Socket you are using. It is 1 A using
the XG4M for example.
2. For standard 0.15-μm gold plating.
www.DataSheet.in
Flat Cable Connectors XG4
41






XG4E Datasheet, Funktion
XG4E Plugs and XG4S Strain Relief (Locking Levers on Connector)
Dimensions
XG4E-@@31/-@@71
(With long locks)
XG4E-@@32/-@@72
(With short locks)
0.635 × 0.635
(Long locks)
Open-end cover
(Short locks)
0.635 × 0.635
Strain Relief
Two, 2.6 dia.
(M3 tapping screw hole)
Two, 2.65 dia.
XG4S-@@04
Strain Relief
Polarity slot
Triangular
mark
Polarizing Key slot Polarizing Key slot
(Not on models with
less than 14 contacts.)
Dimensions
No. of
contacts
A
B
10 32.0 17.5
14 37.1 22.6
16 39.6 25.2
20 44.7 30.2
26 52.3 37.9
30 57.4 42.9
34 62.5 48.0
40 70.1 55.6
50 82.8 68.3
60 95.5 81.0
64 100.6 86.1
C
10.16
15.24
17.78
22.86
30.48
35.56
40.64
48.26
60.96
73.66
78.74
Dimensions (mm)
DE
F
Long Short
Lock Lock
21.8 27.9 46.4 40.4
26.9 33.0 51.5 45.5
29.5 35.6 54.1 46.0
34.5 40.6 59.1 53.1
42.2 48.3 66.8 60.7
47.2 53.3 71.8 65.8
52.3 58.4 76.9 70.9
59.9 66.0 84.5 78.5
72.6 78.7 97.2 91.2
85.3 91.4 109.9 103.9
90.4 96.5 115.0 109.0
G
16.9
22.0
24.6
29.6
38.0
42.3
47.4
55.0
67.7
80.4
85.5
Note: See the “Polarity Slot and Polarizing Key Slot Number and Position” section for
details on the availability (10-contact Connectors) and pitch (with 50, 60, or 64-
contact Connectors) of polarity slots.
46 Flat Cable Connectors XG4
www.DataSheet.in

6 Page









XG4E pdf, datenblatt
XG4A Plugs without Lock Levers
Note: XG4Z-001@ Lock Levers that can be installed after PCB assembly may be purchased separately. (See the following page.)
Dimensions
XG4A-@@33/-@@73 (With straight DIP terminals)
XG4A-@@36/-@@76 (With right-angle DIP terminals)
Straight DIP terminals
0.635 × 0.635
Right-angle DIP terminals
0.635 × 0.635
Straight DIP terminals
Right-angle DIP terminals
Two, 2.6 dia.
(M3 tapping screw hole)
Two, 2.65 dia.
Polarity slot
Polarizing Key slot
Triangular mark
Polarizing Key slot
(not on models with
less than 14 contacts)
Mounting holes (bottom view)
Right-angle terminals
0.8 +0.1 dia. (DIP terminals)
0
Two, 2.8 dia.
(M2.6)
Two, 3.2 dia.
(M3 tapping
screw hole)
Straight terminals
0.8 +0.1 dia. (DIP terminals)
0
Two, 3.2 dia.
(M3 tapping
screw hole)
No. of
contacts
A
10 32.0
14 37.1
16 39.6
20 44.7
26 52.3
30 57.4
34 62.5
40 70.1
50 82.8
60 95.5
64 100.6
Dimensions (mm)
BCD
17.5 10.16 21.8
22.6 15.24 26.9
25.2 17.78 29.5
30.2 22.86 34.5
37.9 30.48 42.2
42.9 35.56 47.2
48.0 40.64 52.3
55.6 48.26 59.9
68.3 60.96 72.6
81.0 73.66 85.3
86.1 78.74 90.4
E
27.9
33.0
35.6
40.6
48.3
53.3
58.4
66.0
78.7
91.4
96.5
Note: See the “Polarity Slot and Polarizing Key Slot Number and
Position” section for details on the availability (10-contact
Connectors) and pitch (with 50, 60, or 64-contact Connec-
tors) of polarity slots.
52 Flat Cable Connectors XG4
www.DataSheet.in

12 Page





SeitenGesamt 22 Seiten
PDF Download[ XG4E Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
XG4Flat Cable ConnectorsOmron Electronics
Omron Electronics
XG4AFlat Cable ConnectorsOmron Electronics
Omron Electronics
XG4CFlat Cable ConnectorsOmron Electronics
Omron Electronics
XG4EFlat Cable ConnectorsOmron Electronics
Omron Electronics
XG4HFlat Cable ConnectorsOmron Electronics
Omron Electronics

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche