|
|
PDF SH063Mxxxxxxx-xxxx Data sheet ( Hoja de datos )
| Número de pieza | SH063Mxxxxxxx-xxxx | |
| Descripción | Aluminum Electrolytic Capacitors | |
| Fabricantes | YAGEO | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de SH063Mxxxxxxx-xxxx (archivo pdf) en la parte inferior de esta página. Total 25 Páginas | ||
|
No Preview Available !
YAGEO Corporation
Date: 04/15/2009
Aluminum Electrolytic Capacitors
File : 2060
Engineering Bulletin for SH Type
Page: 1/25
______________________________________________________________________________________
SH Type
+105ºC Single-ended lead aluminum electrolytic capacitors for the rated voltage up to 450 V.
. Long life for 105ºC, 2000 hrs, suited for high quality and high reliability demander.
. High CV product, the dimension are as same as SEK series for under 100WV.
Diagram of Dimensions (Unit = mm)
Vinyl Sleeve
Rubber End Seal
dψ
F ±0.5
L
15 Min 5 Min
D +0.5
L≦ 16 :
L > 16 :
Dψ=8 & 10:
L+1.5max
L+2max
L+2.5max
Dψ< 20 : Dψ+0.5
Dψ≧ 20 : Dψ+1
D ψ 5.0 6.0 8.0 10.0 12.0 13.0 16.0 18.0
F 2.0 2.5 3.5
5.0
7.5
d ψ 0.5
0.6 0.8
22.0
10.0
0.8
www.DataSheet.in
1 page  
YAGEO Corporation
Date: 04/15/2009
Aluminum Electrolytic Capacitors
File : 2060
Engineering Bulletin for SH Type
Page: 5/25
______________________________________________________________________________________
PERFORMANCE CHARACTERISTICS (continued)
1.3.2.2 Reverse Bias Test.
The capacitor under test shall be connected to a power supply with sufficient voltage to provide a
constant direct current of 500 milliamperes when the positive capacitor terminal is connected to the
negative supply terminal and the negative capacitor terminal to the positive supply terminal. The
constant current shall be maintained until (1) the capacitor vents, (2)300 seconds have elapsed, or (3)
The capacitor open circuits.
2. Mechanical Characteristics
2.1 Lead Pull test
Capacitor leads shall withstand a steady pull of 1 Kg applied axially to the leads for 5 seconds.
3. Electrical Characteristics
3.1 Standard Test Conditions
Unless otherwise specified all tests shall be performed at, or referred to, an ambient temperature of 20ºC
and a relative humidity not greater than 50%.
3.2 Capacitance and Dissipation Factor
Measurements shall be made on a capacitance bridge capable of +-2% accuracy on capacitance and
dissipation factor measurements. Measurements shall be made at 120 Hz The RMS value of the AC
measuring voltage shall not exceed 1.0 volt.
3.3 Leakage Current
3.3.1 Pre-conditioning. Rated working voltage shall be applied to capacitors for a minimum period of 15
minutes duration at least 24 hours and not more than 48 hours before test.
3.3.2 Test. Measurements shall be made after a 2 minute charge at rated working voltage at 20ºC with an
application of a steady source of power. Such as a regular power supply, with a 1000 ohm resistance to
limit the charging current, connected in series with each capacitor under test.
3.4 Surge Voltage
The surge DC rating is the maximum voltage to which the capacitor should be subjected under any
conditions. This includes transients and peak ripple at the highest line voltage.
3.4.1 Capacitors, connected in series with 1000 ohm resistors, shall withstand the surge test voltage applied
at the rated of 1/2 minute on, 5 1/2 minutes off, for 1000 successive test cycles at 20ºC.(see the
following table)
Rated Voltage 6.3 10 16 25 35 50 63 100 160 200 250 350 400 450
--------------------------------------------------------------------------------------------------------------------
Surge Voltage 8 13 20 32 44 63 79 125 200 250 300 400 450 500
www.DataSheet.in
5 Page 
Table 1-3 SH Type, Standard Ratings and Catalog Number
Capa-
Rated Size (mm) Leakage
Catalog Number
citance Voltage
Current
SH016M0047A2F-0511
SH016M0047AZF-0511
SH016M0047A5F-0511
SH016M0068B2F-0511
SH016M0068A2F-0511
SH016M0068AZF-0511
SH016M0068A5F-0511
SH016M0100B2F-0511
SH016M0100A2F-0511
SH016M0100AZF-0511
SH016M0100A5F-0511
SH016M0100BZF-0611
SH016M0100AZF-0611
SH016M0100A5F-0611
SH016M0150B3F-0811
SH016M0150A3F-0811
SH016M0220B3F-0811
SH016M0220A3F-0811
SH016M0220BZF-0611
SH016M0220AZF-0611
SH016M0220A5F-0611
SH016M0330B3F-0811
SH016M0330A3F-0811
SH016M0330A5F-0811
SH016M0330B5S-1012
SH016M0330A5S-1012
SH016M0470B3F-0811
SH016M0470A3F-0811
SH016M0470A5F-0811
SH016M0470B5S-1012
SH016M0470A5S-1012
SH016M0680B5S-1015
SH016M0680A5S-1015
SH016M1000B5S-1015
SH016M1000A5S-1015
SH016M1000B5S-1019
SH016M1000A5S-1019
SH016M1500A5S-1019
SH016M1500B5S-1320
SH016M1500A5S-1320
SH016M2200B5S-1320
SH016M2200A5S-1320
SH016M2200B5S-1325
SH016M2200A5S-1325
SH016M3300B5S-1325
(Μf)
47
47
47
68
68
68
68
100
100
100
100
100
100
100
150
150
220
220
220
220
220
330
330
330
330
330
470
470
470
470
470
680
680
1000
1000
1000
1000
1500
1500
1500
2200
2200
2200
2200
3300
(V.DC)
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
DXL
5X11
5X11
5X11
5X11
5X11
5X11
5X11
5X11
5X11
5X11
5X11
6.3X11
6.3X11
6.3X11
8X11
8X11
8X11
8X11
6.3X11
6.3X11
6.3X11
8X11
8X11
8X11
10X12
10X12
8X11
8X11
8X11
10X12
10X12
10X15
10X15
10X15
10X15
10X19.5
10X19.5
10X19.5
13X20
13X20
13X20
13X20
13X25
13X25
13X25
(Μa)
11
11
11
14
14
14
14
19
19
19
19
19
19
19
27
27
38
38
38
38
38
56
56
56
56
56
78
78
78
78
78
112
112
163
163
163
163
240
243
243
355
355
355
355
355
Dissipation Ripple
Factor 105°C 120 Hz
(Tanδ)
(Ma)
0.18 85
0.18 85
0.18 85
0.18 100
0.18 100
0.18 100
0.18 100
0.18 115
0.18 115
0.18 115
0.18 115
0.18 135
0.18 135
0.18 135
0.18 180
0.18 180
0.18 235
0.18 235
0.18 180
0.18 180
0.18 180
0.18 315
0.18 315
0.18 315
0.18 285
0.18 285
0.18 315
0.18 315
0.18 315
0.18 395
0.18 395
0.18 530
0.18 530
0.18 600
0.18 600
0.18 700
0.18 700
0.18 705
0.18 860
0.18 860
0.20 991
0.20 991
0.20 1150
0.20 1150
0.22 1150
www.DataSheet.in
11 Page | ||
| Páginas | Total 25 Páginas | |
| PDF Descargar | [ Datasheet SH063Mxxxxxxx-xxxx.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| SH063Mxxxxxxx-xxxx | Aluminum Electrolytic Capacitors | YAGEO |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |