Datenblatt-pdf.com


SM06B-PASS-1-* Schematic ( PDF Datasheet ) - JST

Teilenummer SM06B-PASS-1-*
Beschreibung CONNECTOR
Hersteller JST
Logo JST Logo 




Gesamt 15 Seiten
SM06B-PASS-1-* Datasheet, Funktion
2.0mm
(.079") pitch
PA FAMILY SERIES/PA•PAF•PAL CONNECTOR
Wire-to-board (Crimp style/IDC) / Wire-to-wire (Crimp style/IDC)
Features ––––––––––––––––––––––––
• Secure locking device
The housing has a locking device to prevent accidental
disconnection because of routing of wires or of vibration, and
also reverse and different circuit numbers mating.
• Interchangeable between crimp and IDC socket
Both crimp and IDC sockets use the same headers and wire-to-
wire mating halves.
• Secondary retainers
Secondary retainers enhance safety in case of partial insertion
or accidental release of the contact.
• Harness variation
PAL, wire-to-wire crimp style connector, increases wire harness variation.
Based upon wire-to-board crimp style PA
connectors, the PA series family of
connector have been expanded to meet the
requirement of complex wire harness of
2.0mm (.079") pitch connectors with secure
locking mechanism thanks to the
additional line up of wire-to-board IDC style
PAF connectors and wire-to-wire crimp
style PAL connectors.
Retainer
PAF Receptacle
(IDC style)
PA Shorouded header
(Top entry type)
Retainer
Retainer
PA Receptacle
(Crimp style Standard type)
PA Receptacle
(Crimp style Retainer mountable type)
PAF Receptacle
(IDC style)
PAL
(Crimp style Wire-to-wire)
PA Shorouded header
(Side entry type)
PA Shorouded header
(Top entry type)
Retainer
* Contact JST if Lead-Free product is required.
* Refer to "General Instruction and Notice when using
Terminals and Connectors" at the end of this catalog.
* Contact JST for details.
Standards ––––––––––––––––––––––
0 Recognized E60389
1Certified LR20812
PA connector
(Standard type, Retainer mountable type)
• Highly reliable contact
The box contact supplies stable contact performance even under
conditions of vibration, distortion, low voltage or low current.
• Insertion guide mechanism
Header has housing insertion guides for easy and secure insertion.
• Flanged press pin
Top entry type header has flanged press pins, preventing
accidental removal of the pins that might result from the
distorted unmating especially in the case of small No. of circuits.
PAF connector
• The industry’s first secure lock IDC connectors
By separating ID section and secure lock section, the industrys first
secure lock specification has been achieved for IDC that was said
to be impossible. Our fully automatic IDC machines, BCD-M5BP
(for simple harness) and CAM-M12B, SAD-M12E (for multi-
harness), can be applied for harness making.
• Metallic strain relief
Metallic strain relief on the contact securely grips wire insulation that
can avoid direct stress of vibration or impact. The same grip strength
as insulation barrel of crimp style contact could be achieved.
• Retainer with four locking points
The new four locking points design ensures wire retention force
of every direction that is almost superior to contact retention
force of crimp style connectors. It also completely covers
exposed terminated ID contact.
PAL connector
• The industry’s first wire to wire 2.0mm (.079")
pitch retainer mountable type connector.
• Either with or without panel lock can be
selected according to application.
61
www.DataSheet.in






SM06B-PASS-1-* Datasheet, Funktion
PA FAMILY SERIES /PA CONNECTOR (Crimp style Standard type)
SMT type shrouded header –––––––––––––––––––––––––––––––––––––––––––––––––
Top entry type
(2 to 3 circuits)
B
A
2.0
(.079)
5.7(.224)
Side entry type
(2 to 3 circuits)
B
A
2.0
(.079)
5.7(.224)
(4 to 9 circuits)
Circuit No.1
B
A
2.0(.079)
5.7(.224)
(4 to 9 circuits)
B
Circuit No.1
A
2.0(.079)
5.7(.224)
(10 to 13 circuits)
B
A
Circuit No.1
2.0(.079)
5.7(.224)
(10 to 12 circuits)
B
A
Circuit No.1
2.0(.079)
5.7(.224)
Circuit No.1
Circuit No.1
Top entry type
Circuits
2
Model No.
Without a boss
With a boss
BM02B-PASS-(*) BM02B-PASS-1-(*)
Dimensions mm(in.)
AB
2.0(.079) 8.0( .315)
3 BM03B-PASS-(*) BM03B-PASS-1-(*) 4.0(.157) 10.0( .394)
4 BM04B-PASS-(*) BM04B-PASS-1-(*) 6.0(.236) 12.0( .472)
5 BM05B-PASS-(*) BM05B-PASS-1-(*) 8.0(.315) 14.0( .551)
6 BM06B-PASS-(*) BM06B-PASS-1-(*) 10.0(.394) 16.0( .630)
7 BM07B-PASS-(*) BM07B-PASS-1-(*) 12.0(.472) 18.0( .709)
8 BM08B-PASS-(*) BM08B-PASS-1-(*) 14.0(.551) 20.0( .787)
9 BM09B-PASS-(*) BM09B-PASS-1-(*) 16.0(.630) 22.0( .866)
10 BM10B-PASS-(*) BM10B-PASS-1-(*) 18.0(.709) 24.0( .945)
11 BM11B-PASS-(*) BM11B-PASS-1-(*) 20.0(.787) 26.0(1.024)
12 BM12B-PASS-(*) BM12B-PASS-1-(*) 22.0(.866) 28.0(1.102)
13 BM13B-PASS-(*) BM13B-PASS-1-(*) 24.0(.945) 30.0(1.181)
Q'ty /
reel
500
500
500
500
500
500
500
500
500
500
500
500
Material and Finish
Post: Brass, copper-undercoated, tin-plated
Wafer: Polyamide resin, UL94V-0, natural (ivory)
Solder tab: Brass, copper-undercoated, tin-plated
Note:
1. (*): TF…taping product
TFT…taping product with suction tape.
2. BM13B-PASS-(*) and BM13B-PASS-1-(*) are not UL/CSA approved.
66
Side entry type
Circuits
2
3
4
5
6
7
8
9
10
11
12
Model No.
Without a boss
With a boss
SM02B-PASS-(*) SM02B-PASS-1-(*)
SM03B-PASS-(*) SM03B-PASS-1-(*)
SM04B-PASS-(*) SM04B-PASS-1-(*)
SM05B-PASS-(*) SM05B-PASS-1-(*)
SM06B-PASS-(*) SM06B-PASS-1-(*)
SM07B-PASS-(*) SM07B-PASS-1-(*)
SM08B-PASS-(*) SM08B-PASS-1-(*)
SM09B-PASS-(*) SM09B-PASS-1-(*)
SM10B-PASS-(*) SM10B-PASS-1-(*)
SM11B-PASS-(*) SM11B-PASS-1-(*)
SM12B-PASS-(*) SM12B-PASS-1-(*)
Dimensions mm(in.)
AB
2.0(.079) 8.0( .315)
4.0(.157) 10.0( .394)
6.0(.236) 12.0( .472)
8.0(.315) 14.0( .551)
10.0(.394) 16.0( .630)
12.0(.472) 18.0( .709)
14.0(.551) 20.0( .787)
16.0(.630) 22.0( .866)
18.0(.709) 24.0( .945)
20.0(.787) 26.0(1.024)
22.0(.866) 28.0(1.102)
Q'ty /
reel
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
Material and Finish
Post: Brass, copper-undercoated, tin-plated
Wafer: Polyamide resin, UL94V-0, natural (ivory)
Solder tab: Brass, copper-undercoated, tin-plated
Note:
(*): TB…taping product
TBT…taping product with suction tape.
www.DataSheet.in

6 Page









SM06B-PASS-1-* pdf, datenblatt
PA FAMILY SERIES /PAL CONNECTOR (Wire-to-wire type)
Contact –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
12.8(.504)
2.85(.112)
1.3(.051)
Model No.
SPAL-001T-P0.5
SPAL-002T-P0.5
mm2
0.13 to 0.33
0.08 to 0.21
Applicable wire
AWG # Insulation O.D. mm(in.)
26 to 22 1.0 to 1.5(.039 to .059)
28 to 24 0.9 to 1.5(.035 to .059)
Q'ty /
reel
10,000
Material and Finish
Phosphor bronze, tin-plated
Housing –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Without panel locks
(2 to 5 circuits)
B
A
2.0(.079)
6.3(.248)
3.7(.146)
3.4(.134)
(6 to 8 circuits)
B
A
2.0(.079)
6.3(.248)
3.7(.146) 3.4(.134)
Circuit No.1
4.7
(.185)
Circuit No.1
With panel locks
(2 to 4 circuits)
B 3.2(.126)
A 3.7(.146)
2.0(.079)
6.3
(.248)
3.4
(.134)
1.0
(.039)
4.4
(.173)
3.25(.128)
Circuit No.1
(6 to 8 circuits)
B
A
2.0(.079)
3.2(.126)
3.7(.146)
6.3(.248)
3.4(.134)
C+00.1(+.0004 )
D±0.1(.004)
CCiirrccuuiittss
2
3
4
5
6
7
8
9
10
MMooddeell NNoo..
DDiimmeennssiioonnss mmmm((iinn..))
AA BB
PPAALRRP--02VF
22..00( (..007799)) 59.4.4( (.2.31730))
PPAALRRP--03VF
44..00( (..115577)) 171.4.4( (.2.49419))
PPAALRRP--04VF
66..00( (..223366)) 193.4.4( (.3.57208))
PPAALRRP--05VF
88..00( (..331155)) 1115.4.4( (.4.64096))
PPAALRRP--06VF
1100..00( (..339944)) 1147.0.4( (.5.65815))
PPAALRRP--07VF
1122..00( (..447722)) 1169.0.4( (.6.73604))
PPAALRRP--08VF
1144..00( (..555511)) 1281.0.4( (.7.80493))
PARP-09V
PARP-10V
16.0( .630)
Material
18.0( .709)
20.0( .787)
22.0( .866)
PARNPyl-o1n56V6, UL94V-02,8n.0a(t1u.r1a0l2()white3)2.0(1.260)
QQ''ttyy //
bbaagg
11,,000000
11,,000000
11,,000000
11,,000000
11,,000000
11,,000000
11,,000000
1,000
1,000
500
Circuits
2
3
4
6
7
8
Model No.
PALR-02V
PALR-03V
PALR-04V
PALR-06V
PALR-07V
PALR-08V
Material
Dimensions mm(in.)
ABCD
2.0(.079) 9.4(.370) 9.8(.386) 13.4( .528)
4.0(.157) 11.4(.449) 11.8(.465) 15.4( .606)
6.0(.236) 13.4(.528) 13.8(.543) 17.4( .685)
10.0(.394) 17.4(.685) 19.8(.780) 21.4( .843)
12.0(.472) 19.4(.764) 21.8(.858) 23.4( .921)
14.0(.551) 21.4(.843) 23.8(.937) 25.4(1.000)
Q'ty /
bag
1,000
1,000
1,000
1,000
1,000
1,000
Material
Nylon 66, UL94V-0, natural (white)
<For reference> As the color identification,
the following alphabet shall be put in the underlined part.
For availability, delivery and minimum order quantity, contact JST.
ex. PALR-02V(F)-oo-
(blank)…natural (white)
R…red E…blue M…green Y…yellow
5.15
Circuit
No.1
(.203)
1.6(.063) 4.4
(.173)
C+00.1(+.0004 )
D±0.1(.004)
Retainer –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Retainers are interchangeable with those of the PA crimp style retainer mountable type.
72
www.DataSheet.in

12 Page





SeitenGesamt 15 Seiten
PDF Download[ SM06B-PASS-1-* Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
SM06B-PASS-1-*CONNECTORJST
JST

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche