|
|
PDF AD8629S Data sheet ( Hoja de datos )
| Número de pieza | AD8629S | |
| Descripción | Single-Supply Rail-to-Rail Input/Output Operational Amplifier | |
| Fabricantes | Analog Devices | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de AD8629S (archivo pdf) en la parte inferior de esta página. Total 8 Páginas | ||
|
No Preview Available !
Zero-Drift, Single-SupplwywwR.DaataiSlhe-ett4oU.c-oRm ail
Input/Output Operational Amplifier
AD8629S
1.0 Scope
1.1. This specification documents the detail requirements for space qualified product manufactured on Analog
Devices, Inc.'s QML certified line per MIL-PRF-38535 Level V except as modified herein.
1.2. The manufacturing flow described in the STANDARD SPACE LEVEL PRODUCTS PROGRAM brochure is to
be considered a part of this specification. http://www.analog.com/aeroinfo
1.3. This data specifically details the space grade version of this product. A more detailed operational description
and a complete data sheet for commercial product grades can be found at http://www.analog.com/AD8629
2.0 Part Number
2.1. The complete part number(s) of this specification follows:
Specific Part Number
Description
AD8629D703L
Dual, Zero Drift, Single-Supply, Rail-to-Rail I/O, Operational Amplifier.
Radiation tested to 10Krads (Si)
3.0 Case Outline
3.1. The case outline(s) are as designated in MIL-STD-1835 and as follows:
Outline Letter Descriptive Designator Terminals
Package style
L
GDFP1-F10
10 lead
Ceramic flatpack (CERPAK)
Pin Number
1
2
3
4
5
6
7
8
9
10
Terminal
Symbol
OUT A
-IN A
NC
+IN A
-Vs
+IN B
-IN B
NC
OUT B
+Vs
Package: L
Pin Type
Pin Description
Analog output
Operational amplifier output, Amp-A
Analog input
Operational amplifier negative input, Amp-A
NC Not connected
Analog input
Operational amplifier positive input, Amp-A
power
Negative power supply
Analog input
Operational amplifier positive input, Amp-B
Analog input
Operational amplifier negative input, Amp-B
NC Not connected
Analog output
Operational amplifier output, Amp-B
power
Positive power supply
Figure 1 – Terminal Connections
ASD0016529
Rev. C
Information furnished by Analog Devices is believed to be accurate and
reliable. However, no responsibility is assumed by Analog Devices for its use,
nor for any infringements of patents or other rights of third parties that may
result from its use. Specifications subject to change without notice. No license
is granted by implication or otherwise under any patent or patent rights of
Analog Devices. Trademarks and registered trademarks are the property of
their respective companies.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
www.analog.com
Fax: 781.326.8703 © 2010 Analog Devices, Inc. All rights reserved.
1 page  
AD8629Swww.DataSheet4U.com
TABLE IB – ELECTRICAL PERFORMANCE CHARACTERISTICS (Vs = 2.7V) – Cont.
Parameter
See notes at end of table
Symbol
Conditions 1/
Unless otherwise specified
Sub-Group
Limit
Min
Limit
Max
Output Voltage Low
VOL RL = 100 kΩ to +Vs
15
2,3 5
M,D 1 5
RL = 10 kΩ to +Vs
M,D
1 20
2,3 20
1 20
Short-Circuit Limit
ISC
M,D
1 ±10
2,3 ±5
1 ±10
POWER SUPPLY
Total Supply Current
(Both Amps)
ISY VO = VS/2
M,D
1 2.0
2,3 2.4
1 2.0
DYNAMIC PERFORMANCE
Gain Bandwidth Product
GBP 2/ 3/
4 2.0
Units
mV
mV
mV
mV
mV
mV
mA
mA
mA
mA
mA
mA
MHz
TABLE IB NOTES:
1/ +VS = 2.7V, -Vs=GND, VCM = 1.35V, TA nom = 25ºC, TA max = 125ºC, TA min = -55ºC unless otherwise noted.
2/ Guaranteed by characterization analysis – not production tested. Characterization will be repeated in conjunction with any major design changes.
3/ Parameter is not tested post irradiation
TABLE IIA – ELECTRICAL TEST REQUIREMENTS:
Table IIA
Test Requirements
Subgroups (in accordance with
MIL-PRF-38535, Table III)
Interim Electrical Parameters
1
Final Electrical Parameters
1,2,3 1/ 2/
Group A Test Requirements
1,2,3
Group C end-point electrical parameters
1,2,3 2/
Group D end-point electrical parameters
1,2,3
Group E end-point electrical parameters
1 3/
Table IIA Notes:
1/ PDA applies to subgroup 1 only. Delta's excluded from PDA.
2/ See Table IIB for delta parameters
3/ Parameters noted in Table IA, IB are not tested post irradiation.
ASD0016529 Rev. C | Page 5 of 8
5 Page | ||
| Páginas | Total 8 Páginas | |
| PDF Descargar | [ Datasheet AD8629S.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| AD8629 | Rail-to-Rail Input/Output Operational Amplifier | Analog Devices |
| AD8629S | Single-Supply Rail-to-Rail Input/Output Operational Amplifier | Analog Devices |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |