|
|
Número de pieza | IR0530CSPTRPBF | |
Descripción | FlipKY | |
Fabricantes | International Rectifier | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de IR0530CSPTRPBF (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
No Preview Available ! Bulletin I0175J rev. C 05/06
www.DataSheet4U.com
FlipKYTM
Features
• Ultra Low VF To Footprint Area
• Very Low Profile (<0.6mm)
• Low Thermal Resistance
• Supplied Tested And On Tape & Reel
• Lead-Free ("PbF" suffix)
Applications
• Reverse Polarity Protection
• Current Steering
• Freewheeling
• Flyback
• Oring
IR0530CSPTRPbF
0.5 Amp
30 Volt
FlipKYTM
Major Ratings and Characteristics
Characteristics
IF(AV) Rectangular waveform
VRRM
IFSM @ tp = 5 μs sine
VF @ 0.5 Apk, TJ=125°C
TJ range
Values
0.5
30
190
0.33
- 55 to 150
Units
A
V
A
V
°C
Description
International Rectifier's FlipKY product family utilizes wafer level chip scale packaging to deliver Schottky diodes with
the lowest VF to PCB footprint area in industry. The three pad 0.9mm x 1.2mm devices can deliver up to 0.5A and
occupy only 1.08mm2 of board space. The anode and cathode connections are made through solder bump pads on
one side of the silicon rather than through protruding leads enabling designers to strategically place the diodes on the
PCB. This design not only minimizes board space but also reduces thermal resistance and inductance, which can
improve overall circuit efficiency.
Typical applications include hand-held, portable equipment such as cell phones, MP3 players, PDAs, and portable hard
disk drives where space savings and performance are crucial.
www.irf.com
1
1 page FlipKY TM Outline Dimension and Tape and Reel
0.500
21
ASSIGNMENTS
1 = CATHODE
2 = CATHODE
3 = ANODE
IR0530CSPTRPbF
Bulletin I0175J rev. C 05/06
www.DataSheet4U.com
0.520
0.460
0.125
0.105
0.700
1.244
3
1.244
0.300
0.914
NOTES:
1. DIMENSIONING & TOLERANCING PER ASME Y14.5M-1994.
2. CONTROLLING DIMENSION: MILLIMETER
3. DIMENSIONS ARE SHOWN IN MILLIMETERS
BALL 1
LOCATION MARK
PART NUMBER
WORKWEEK (Y, WW)
LOT NUMBER
Ø 13"
0.395
0.355
RECOMMENDED FOOTPRINT
8mm
Pin 2 Cathode
0.500
Pin 1 Cathode
A1 BALL
LOCATION
8mm
0.350
0.250
0.700
4mm
FEED DIRECTION
0.350
Pin 3 Anode
NOTES:
1. TAPE AND REEL OUTLINE CONFORMS TO EIA-481 & EIA-541.
0.450
Special Instruction for PCB assembly: see APPLICATION NOTE AN-1079
Data and specifications subject to change without notice.
This product has been designed for Consumer Level.
Qualification Standards can be found on IR's Web site.
IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105
TAC Fax: (310) 252-7309
Visit us at www.irf.com for sales contact information. 05/06
www.irf.com
5
5 Page |
Páginas | Total 5 Páginas | |
PDF Descargar | [ Datasheet IR0530CSPTRPBF.PDF ] |
Número de pieza | Descripción | Fabricantes |
IR0530CSPTRPBF | FlipKY | International Rectifier |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |