Datenblatt-pdf.com


XC164S Schematic ( PDF Datasheet ) - Infineon Technologies AG

Teilenummer XC164S
Beschreibung 16-Bit Single-Chip Microcontroller with C166SV2 Core
Hersteller Infineon Technologies AG
Logo Infineon Technologies AG Logo 




Gesamt 70 Seiten
XC164S Datasheet, Funktion
Data Sheet, V1.0, Jan. 2005
www.DataSheet4U.com
XC164S
16-Bit Single-Chip Microcontroller
with C166SV2 Core
Microcontrollers
Never stop thinking.






XC164S Datasheet, Funktion
XC164S
www.DDatearShieveat4tUi.vcoems
Summary of Features
1 Summary of Features
• High Performance 16-bit CPU with 5-Stage Pipeline
– 25 ns Instruction Cycle Time at 40 MHz CPU Clock (Single-Cycle Execution)
– 1-Cycle Multiplication (16 × 16 bit), Background Division (32 / 16 bit) in 21 Cycles
– 1-Cycle Multiply-and-Accumulate (MAC) Instructions
– Enhanced Boolean Bit Manipulation Facilities
– Zero-Cycle Jump Execution
– Additional Instructions to Support HLL and Operating Systems
– Register-Based Design with Multiple Variable Register Banks
– Fast Context Switching Support with Two Additional Local Register Banks
– 16 Mbytes Total Linear Address Space for Code and Data
– 1024 Bytes On-Chip Special Function Register Area (C166 Family Compatible)
• 16-Priority-Level Interrupt System with up to 67 Sources, Sample-Rate down to 50 ns
• 8-Channel Interrupt-Driven Single-Cycle Data Transfer Facilities via
Peripheral Event Controller (PEC), 24-Bit Pointers Cover Total Address Space
• Clock Generation via on-chip PLL (factors 1:0.15 1:10), or
via Prescaler (factors 1:1 60:1)
• On-Chip Memory Modules
– 2 Kbytes On-Chip Dual-Port RAM (DPRAM)
– 2 Kbytes On-Chip Data SRAM (DSRAM)
– 2 Kbytes On-Chip Program/Data SRAM (PSRAM)
– up to 128 Kbytes On-Chip Program Memory (Flash Memory)
• On-Chip Peripheral Modules
– 14-Channel A/D Converter with Programmable Resolution (10-bit or 8-bit) and
Conversion Time (down to 2.55 µs or 2.15 µs)
– Two 16-Channel General Purpose Capture/Compare Units (12 Input/Output Pins)
– Capture/Compare Unit for flexible PWM Signal Generation (CAPCOM6)
(3/6 Capture/Compare Channels and 1 Compare Channel)
– Multi-Functional General Purpose Timer Unit with 5 Timers
– Two Synchronous/Asynchronous Serial Channels (USARTs)
– Two High-Speed-Synchronous Serial Channels
– On-Chip Real Time Clock
• Idle, Sleep, and Power Down Modes with Flexible Power Management
• Programmable Watchdog Timer and Oscillator Watchdog
• Up to 12 Mbytes External Address Space for Code and Data
– Programmable External Bus Characteristics for Different Address Ranges
– Multiplexed or Demultiplexed External Address/Data Buses
– Selectable Address Bus Width
– 16-Bit or 8-Bit Data Bus Width
– Four Programmable Chip-Select Signals
• Up to 79 General Purpose I/O Lines,
partly with Selectable Input Thresholds and Hysteresis
Data Sheet
2 V1.0, 2005-01

6 Page









XC164S pdf, datenblatt
XC164S
www.DDatearShieveat4tUi.vcoems
General Device Information
Table 2
Pin Definitions and Functions (cont’d)
Symbo Pin Input Function
l Num. Outp.
P9
P9.0 10
IO Port 9 is a 6-bit bidirectional I/O port. Each pin can be
programmed for input (output driver in high-impedance
state) or output (configurable as push/pull or open drain
driver). The input threshold of Port 9 is selectable (standard
or special).
The following Port 9 pins also serve for alternate functions:
I/O CC16IO CAPCOM2: CC16 Capture Inp./Compare Outp.,
P9.1 11
I EX7IN Fast External Interrupt 7 Input (alternate pin B)
I/O CC17IO CAPCOM2: CC17 Capture Inp./Compare Outp.,
P9.2 12
I EX6IN Fast External Interrupt 6 Input (alternate pin B)
I/O CC18IO CAPCOM2: CC18 Capture Inp./Compare Outp.,
P9.3 13
I EX7IN Fast External Interrupt 7 Input (alternate pin A)
I/O CC19IO CAPCOM2: CC19 Capture Inp./Compare Outp.,
P9.4
P9.5
P5
14
15
P5.0
P5.1
P5.2
P5.3
P5.4
P5.5
P5.10
P5.11
P5.6
P5.7
P5.12
P5.13
P5.14
P5.15
18
19
20
21
22
23
24
25
26
27
30
31
32
33
I EX6IN Fast External Interrupt 6 Input (alternate pin A)
I/O CC20IO CAPCOM2: CC20 Capture Inp./Compare Outp.
I/O CC21IO CAPCOM2: CC21 Capture Inp./Compare Outp.
I Port 5 is a 14-bit input-only port.
The pins of Port 5 also serve as analog input channels for the
A/D converter, or they serve as timer inputs:
I AN0
I AN1
I AN2
I AN3
I AN4
I AN5
I
AN10,
T6EUD GPT2 Timer T6 Ext. Up/Down Ctrl. Inp.
I
AN11,
T5EUD GPT2 Timer T5 Ext. Up/Down Ctrl. Inp.
I AN6
I AN7
I
AN12,
T6IN GPT2 Timer T6 Count/Gate Input
I
AN13,
T5IN GPT2 Timer T5 Count/Gate Input
I
AN14,
T4EUD GPT1 Timer T4 Ext. Up/Down Ctrl. Inp.
I
AN15,
T2EUD GPT1 Timer T2 Ext. Up/Down Ctrl. Inp.
Data Sheet
8 V1.0, 2005-01

12 Page





SeitenGesamt 70 Seiten
PDF Download[ XC164S Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
XC164-1616-Bit Single-Chip MicrocontrollerInfineon Technologies AG
Infineon Technologies AG
XC164-32F16-Bit Single-Chip MicrocontrollerInfineon Technologies AG
Infineon Technologies AG
XC164CM16-bit MicrocontrollerInfineon Technologies AG
Infineon Technologies AG
XC164CS16-Bit Single-Chip MicrocontrollerInfineon Technologies AG
Infineon Technologies AG
XC164CS-16F16-Bit Single-Chip MicrocontrollerInfineon Technologies
Infineon Technologies

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche