LC78630E Schematic ( PDF Datasheet ) - Sanyo Semicon Device

Teilenummer	LC78630E
Beschreibung	Compact Disk Player DSP
Hersteller	Sanyo Semicon Device
Logo
Gesamt 30 Seiten Ordering number : EN 5121B CMOS LSI LC78630E Compact Disk Player DSP Overview The LC78630E is a CD-DA signal-processing LSI for use in video CD player systems. The LC78630E incorporates signal-processing circuits for demodulating and de- interleaving the EFM signal from the optical pickup, error detection and correction, and digital filtering. It also includes a 1-bit D/A converter and executes commands sent from a system control microprocessor. Features • Built-in PLL for EFM signal synchronization (a hybrid analog-digital PLL that supports 4× playback) • Built-in PLL for variable pitch playback (±13%) • 18KB RAM on chip • Error detection and correction (corrects two errors in C1 and four errors in C2) • Frame jitter margin: ±8 frames • Frame synchronization signal detection, protection, and insertion • Dual interpolation adopted in the interpolation circuit. • EFM data demodulation • Subcode demodulation • Zero-cross muting adopted • Servo command interface • 2fs digital filter • Digital de-emphasis • Built-in independent left- and right-channel digital attenuators (239 attenuation steps) • Left/right swap function • Built-in 1-bit D/A converter (third-order ∆∑ noise shaper, PWM output) • Built-in digital output circuit • CLV servo • Arbitrary track jumping (of up to 255 tracks) • Variable sled voltage (four levels) • Built-in oscillator circuit using an external 16.9344 MHz or 33.8688 MHz (for 4× playback) element • Supply voltage: 3.6 to 5.5 V (4.5 to 5.5 V for 4× playback mode) • Six extended I/O ports and 2 extended output ports Package Dimensions unit: mm 3174-QFP80E [LC78630E] SANYO: QIP80E SANYO Electric Co.,Ltd. Semiconductor Bussiness Headquarters TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110 JAPAN 83097HA (OT)/D3095HA (OT)/60595HA (OT) No. 5121-1/33 LC78630E No. 5121-6/33 6 Page LC78630E • CLV mode In CLV mode, the system detects the disc speed from the HF signal and holds the disc at the prescribed linear speed using multiple control methods switched by changing the DSP internal mode. The PWM frequency is 7.35 kHz. The V/P pin outputs a high level when the system is in rough servo mode and a low level when it is in phase control mode. Internal mode Rough servo (velocity too low) Rough servo (velocity too high) Phase control (PCK locked) CLV+ High Low PWM CLV– Low High PWM V/P High High Low • Rough servo gain switching Code $A8 $A9 Command 8-cm DISC LOADED 12-cm DISC LOADED RES = low r The CLV control gain in rough servo mode can be reduced by 8.5 dB from the 12-cm disc setting for 8-cm discs. • Phase control gain switching Code $B1 $B2 $B3 $B0 Command CLV PHASE COMPARATOR DIVISOR: 1/2 CLV PHASE COMPARATOR DIVISOR: 1/4 CLV PHASE COMPARATOR DIVISOR: 1/8 NO CLV PHASE COMPARATOR DIVISOR USED RES = low r The phase control gain can be switched by switching the value of the divisor in the dividers in the stage preceding the phase comparator. • Internal brake modes Code $C5 $C4 $A3 $CB $CA $CD $CC Command INTERNAL BRAKE ON INTERNAL BRAKE OFF INTERNAL BRAKE CONT INTERNAL BRAKE CONTINUOUS MODE RESET CONTINUOUS MODE TON MODE DURING INTERNAL BRAKING RESET TON MODE RES = low r r r No. 5121-12/33 12 Page
Seiten	Gesamt 30 Seiten
PDF Download	[ LC78630E Schematic.PDF ]

Link teilen

Besondere Datenblatt

Teilenummer	Beschreibung	Hersteller
LC78630	Compact Disk Player DSP	Sanyo Semicon Device
LC78630E	Compact Disk Player DSP	Sanyo Semicon Device

Teilenummer	Beschreibung	Hersteller
CD40175BC	Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.	Fairchild Semiconductor
KTD1146	EPITAXIAL PLANAR NPN TRANSISTOR.	KEC