Datenblatt-pdf.com


LB11650H Schematic ( PDF Datasheet ) - Sanyo Semicon Device

Teilenummer LB11650H
Beschreibung PWM Input Forward/Reverse Motor Driver
Hersteller Sanyo Semicon Device
Logo Sanyo Semicon Device Logo 




Gesamt 6 Seiten
LB11650H Datasheet, Funktion
Ordering number : ENN7676
wwMw.oDnaotaliSthhieceDt4iUg.ictaolmIC
LB11650H
PWM Input Forward/Reverse Motor Driver
Overview
The LB11650H is a full bridge driver that supports
switching between forward and reverse directions. It
operates in one of four modes under application control:
forward, reverse, brake, and open. It also supports direct
PWM control from an external signal. The LB11650 is
optimal for driving brush DC motors and bipolar stepping
motors.
Features
• Supports PWM input
• Built-in high and low side diodes
• Simultaneous on state prevention function (prevents
through currents)
• Built-in thermal shutdown circuit (latching type)
• High and low side short circuit protection function
(latching type overcurrent protection)
• Externally controllable modes: forward, reverse, brake,
open
• Standby mode function
Package Dimensions
unit: mm
3235A-HSOP36
[LB11650H]
17.8
(6.2)
2.7
36
1
(0.5)
0.8 2.0
0.25
0.3
SANYO: HSOP36
Specifications
Absolute Maximum Ratings at Ta = 25°C
Parameter
Motor supply voltage
Peak output current
Continuous output current
Logic system supply voltage
Allowable power dissipation
Operating temperature
Storage temperature
Symbol
VM max
IO PEAK
IO max
VCC max
Pd max
Topr
Tstg
tW 10 µs
Conditions
When mounted on a glass epoxy circuit board
(reference value): 114.3 mm × 76.1 mm × 1.6 mm
Ratings
30
2.0
1.5
7.0
1.75
–20 to +85
–55 to +150
Unit
V
A
A
V
W
°C
°C
Any and all SANYO products described or contained herein do not have specifications that can handle
applications that require extremely high levels of reliability, such as life-support systems, aircraft’s
control systems, or other applications whose failure can be reasonably expected to result in serious
physical and/or material damage. Consult with your SANYO representative nearest you before using
any SANYO products described or contained herein in such applications.
SANYO assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other
parameters) listed in products specifications of any and all SANYO products described or contained
herein.
SANYO Electric Co.,Ltd. Semiconductor Company
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
N2803TN (OT) No. 7676-1/6






LB11650H Datasheet, Funktion
LB11650H
www.DataSheet4U.com
Specifications of any and all SANYO products described or contained herein stipulate the performance,
characteristics, and functions of the described products in the independent state, and are not guarantees
of the performance, characteristics, and functions of the described products as mounted in the customer’s
products or equipment. To verify symptoms and states that cannot be evaluated in an independent device,
the customer should always evaluate and test devices mounted in the customer’s products or equipment.
SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all
semiconductor products fail with some probability. It is possible that these probabilistic failures could
give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire,
or that could cause damage to other property. When designing equipment, adopt safety measures so
that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective
circuits and error prevention circuits for safe design, redundant design, and structural design.
In the event that any or all SANYO products (including technical data, services) described or contained
herein are controlled under any of applicable local export control laws and regulations, such products must
not be exported without obtaining the export license from the authorities concerned in accordance with the
above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, or any information storage or retrieval system,
or otherwise, without the prior written permission of SANYO Electric Co., Ltd.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the “Delivery Specification”
for the SANYO product that you intend to use.
Information (including circuit diagrams and circuit parameters) herein is for example only; it is not
guaranteed for volume production. SANYO believes information herein is accurate and reliable, but
no guarantees are made or implied regarding its use or any infringements of intellectual property rights
or other rights of third parties.
This catalog provides information as of November, 2003. Specifications and information herein are
subject to change without notice.
PS No. 7676-6/6

6 Page







SeitenGesamt 6 Seiten
PDF Download[ LB11650H Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
LB11650PWM Input Forward/Reverse Motor DriverSanyo Semicon Device
Sanyo Semicon Device
LB11650HPWM Input Forward/Reverse Motor DriverSanyo Semicon Device
Sanyo Semicon Device

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche