Datenblatt-pdf.com


MW39962AE Schematic ( PDF Datasheet ) - Panasonic Semiconductor

Teilenummer MW39962AE
Beschreibung Diagonal 11 mm (type-2/3) FIT CCD Area Image Sensor
Hersteller Panasonic Semiconductor
Logo Panasonic Semiconductor Logo 




Gesamt 6 Seiten
MW39962AE Datasheet, Funktion
CCD Area Image Sensor
MW39962AE
Diagonal 11 mm (type-2/3) FIT CCD Area Image Sensor
Overview
The MW39962AE is a type-2/3 2.2M-pixel frame inter-
line transfer (FIT-CCD) solid state image sensor.
This device uses photodiodes in the opto-electric con-
version section and CCDs for signal read-out. The elec-
tronic shutter function allows for an exposure time of
1/10 000 seconds. Further, it features high sensitivity, low
noise, broad dynamic range and low smear level.
The device has a total of 2 182 860 pixels (2 010 hori-
zontal × 1 086 vertical) and provides stable and clear
images with a resolution of 1 100 horizontal and 730 ver-
tical TV lines.
Part Number CCD size System Color or B/W
MW39962AE 11 mm (type-2/3) HDTV
B/W
Features
Effective pixel number: 1 936 (horizontal) × 1 086 (ver-
tical)
High sensitivity
High resolution
Low smear level
Continuously variable-speed electronic shutter function
Frame interline transfer system
Applications
www.DBatraoSahdeceast4tiUn.gcoamnd professional use camera
Front-edge surveillance camera
Pin Assignments
PW 1
32 VS
RG 2
31 Sub
RD 3
30 A1
OD 4
29 A2
VO 5
28 A3
LG 6
27 A4
HL 7
26 A1
H1 8
25 A2
H2 9
24 A3
PW 10
23 A4
IG 11
22 B1
HS 12
21 B2
OG
13
OB section 20
B3
N.C. 14
19 B4
B4 15
18 B1
B3 16
17 B2
(Top View)
Publication date: December 2002
SMD00016AEC
1






MW39962AE Datasheet, Funktion
Request for your special attention and precautions in using the technical information
and semiconductors described in this material
(1) An export permit needs to be obtained from the competent authorities of the Japanese Government
if any of the products or technologies described in this material and controlled under the "Foreign
Exchange and Foreign Trade Law" is to be exported or taken out of Japan.
(2) The technical information described in this material is limited to showing representative characteris-
tics and applied circuits examples of the products. It neither warrants non-infringement of intellec-
tual property right or any other rights owned by our company or a third party, nor grants any license.
(3) We are not liable for the infringement of rights owned by a third party arising out of the use of the
product or technologies as described in this material.
(4) The products described in this material are intended to be used for standard applications or general
electronic equipment (such as office equipment, communications equipment, measuring instru-
ments and household appliances).
Consult our sales staff in advance for information on the following applications:
Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment,
combustion equipment, life support systems and safety devices) in which exceptional quality and
reliability are required, or if the failure or malfunction of the products may directly jeopardize life or
harm the human body.
Any applications other than the standard applications intended.
(5) The products and product specifications described in this material are subject to change without
notice for modification and/or improvement. At the final stage of your design, purchasing, or use of
the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that
the latest specifications satisfy your requirements.
(6) When designing your equipment, comply with the guaranteed values, in particular those of maxi-
mum rating, the range of operating power supply voltage, and heat radiation characteristics. Other-
wise, we will not be liable for any defect which may arise later in your equipment.
Even when the products are used within the guaranteed values, take into the consideration of
incidence of break down and failure mode, possible to occur to semiconductor products. Measures
www.DataShoenett4hUe.csoymstems such as redundant design, arresting the spread of fire or preventing glitch are
recommended in order to prevent physical injury, fire, social damages, for example, by using the
products.
(7) When using products for which damp-proof packing is required, observe the conditions (including
shelf life and amount of time let standing of unsealed items) agreed upon when specification sheets
are individually exchanged.
(8) This material may be not reprinted or reproduced whether wholly or partially, without the prior written
permission of Matsushita Electric Industrial Co., Ltd.
2002 JUL

6 Page







SeitenGesamt 6 Seiten
PDF Download[ MW39962AE Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
MW39962AEDiagonal 11 mm (type-2/3) FIT CCD Area Image SensorPanasonic Semiconductor
Panasonic Semiconductor

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche