|
|
Número de pieza | MAX9502 | |
Descripción | 2.5V Video Amplifier | |
Fabricantes | Maxim Integrated Products | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de MAX9502 (archivo pdf) en la parte inferior de esta página. Total 10 Páginas | ||
No Preview Available ! 19-3674; Rev 0; 5/05
2.5V Video Amplifier with Reconstruction Filter
www.datasheet4u.com
General Description
The MAX9502 small, low-power video amplifier with
integrated reconstruction filter operates from a supply
voltage as low as 2.5V. The small size and the low mini-
mum supply voltage make the MAX9502 ideal for
portable applications such as mobile phones, digital
still cameras, and camcorders.
The MAX9502 DC-couples the input and the output,
resulting in a very small solution. The MAX9502 input can
be directly connected to the output of a video digital-to-
analog converter (DAC). The reconstruction filter is imple-
mented as a 4th-order Chebyshev with a minimum
passband of 5.5MHz, 3dB attenuation at 8MHz, and
55dB attenuation at 27MHz.
The output amplifier provides a closed-loop gain of
+6dB (MAX9502G) or +12dB (MAX9502M), and can
drive a 2VP-P video signal into a 150Ω load to ground.
The output signal is level-shifted so the sync tip is
110mV (typ) above ground.
The MAX9502 operates from a 2.5V to 3.6V single supply
and consumes only 5.3mA quiescent supply current.
An active-low shutdown mode reduces the supply
current to 0.01µA.
The MAX9502 is available in tiny 6-pin µDFN (1mm x
1.5mm x 0.8mm) and 5-pin SC70 packages. The
device is specified over the -40°C to +85°C extended
temperature range.
Applications
Mobile Phones/Smartphones
Digital Still Cameras
Portable Media Players
Camcorders
Other Portable Video Amplifiers
PRODUCT
MAX9503
MAX9505
MAX4090
MAX9504
FEATURES
DirectDrive™, LPF, DC-coupled
input/output, 50dB at 27MHz, TQFN
DirectDrive, LPF, DC-coupled input/output,
50dB at 27MHz analog switch, TQFN
Video amplifier, input clamp, µDFN,
SOT23, SC70
Video amplifier, 2 DC-coupled loads,
optional DC offset bias, µDFN, SOT23
Features
♦ Tiny 6-Pin µDFN (1mm x 1.5mm x 0.8mm) and
5-Pin SC70 Packages
♦ DC-Coupled Input and Output Save Board Space
♦ 4-Pole Chebyshev Filter
♦ 5.5MHz Passband
♦ 55dB Attenuation at 27MHz
♦ 0.01µA Low-Current Shutdown Mode
♦ 2.5V to 3.6V Single-Supply Operation
♦ Video Amplifier with Fixed Gains of +6dB
(MAX9502G) or +12dB (MAX9502M)
Ordering Information
PART*
PIN-PACKAGE
GAIN
(dB)
TOP
MARK
MAX9502GEXK-T 5 SC70-5
+6 ARV
MAX9502GELT-T 6 µDFN-6 (L611-1)
+6
AU
MAX9502MEXK-T 5 SC70-5
+12 ARW
MAX9502MELT-T 6 µDFN-6 (L611-1)
+12
AV
*All devices are specified over the -40°C to +85°C operating
temperature range.
Typical Operating Circuit appears at end of data sheet.
Pin Configurations
TOP VIEW
OUT N.C. VCC
654
IN 1
MAX9502
GND 2
123
IN GND SHDN
µDFN
SHDN 3
MAX9502
SC70
5 OUT
4 VCC
________________________________________________________________ Maxim Integrated Products 1
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at
1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.
1 page 2.5V Video Amplifier with Reconstruction Filter
w w w . d a t a s h Tyepiceal Ot pe4 ratuing. Chcaraoctemristics (continued)
(VCC = SHDN = 3.0V, GND = 0V, RL = 150Ω to GND.)
200
180
160
140
120
100
80
60
40
0.1
MAX9502M
GROUP DELAY
1
FREQUENCY (MHz)
10
SUPPLY CURRENT vs. TEMPERATURE
7.0
6.5
6.0
5.5 MAX9502G
MAX9502M
5.0
4.5
4.0
3.5
3.0
-40
-15 10 35 60
TEMPERATURE (°C)
85
MAX9502G
VOLTAGE GAIN vs. TEMPERATURE
6.5
6.3
6.1
5.9
5.7
5.5
-40
-15 10 35 60
TEMPERATURE (°C)
85
MAX9502G
POWER-SUPPLY REJECTION RATIO
0
-10
-20
-30
-40
-50
-60
-70
-80
-90
-100
0.0001
0.001 0.01 0.1
FREQUENCY (MHz)
1
10
SUPPLY CURRENT
vs. SHDN INPUT VOLTAGE
6.0
5.5 VSHDN = RISING
5.0
4.5
4.0
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0
0 0.5 1.0 1.5 2.0 2.5
SHDN INPUT VOLTAGE (V)
3.0
MAX9502M
VOLTAGE GAIN vs. TEMPERATURE
12.5
12.3
12.1
11.9
11.7
11.5
-40
-15 10 35 60
TEMPERATURE (°C)
85
MAX9502M
POWER-SUPPLY REJECTION RATIO
0
-10
-20
-30
-40
-50
-60
-70
-80
-90
-100
0.0001
0.001 0.01 0.1
FREQUENCY (MHz)
1
10
SHUTDOWN LOGIC THRESHOLD
vs. SUPPLY VOLTAGE
3.0
VSHDN = RISING
2.5
2.0
1.5
1.0
0.5
0
2.5 2.6 2.7 2.8 2.9 3.0 3.1 3.2 3.3 3.4 3.5 3.6
SUPPLY VOLTAGE (V)
0.4
0.2
0.1
-0.1
-0.3
-0.4
1
MAX9502G
DIFFERENTIAL GAIN AND PHASE
23456
7
0.8
0.4
0
-0.4
-0.8
1234567
_______________________________________________________________________________________ 5
5 Page |
Páginas | Total 10 Páginas | |
PDF Descargar | [ Datasheet MAX9502.PDF ] |
Número de pieza | Descripción | Fabricantes |
MAX9500 | (MAX9500 / MAX9501) Triple-Channel HDTV Filters | Maxim Integrated Products |
MAX9501 | (MAX9500 / MAX9501) Triple-Channel HDTV Filters | Maxim Integrated Products |
MAX9502 | 2.5V Video Amplifier | Maxim Integrated Products |
MAX9503 | DirectDrive Video Amplifier | Maxim Integrated Products |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |