|
|
Teilenummer | AV-D97 |
|
Beschreibung | Stereo Receiver | |
Hersteller | Aiwa | |
Logo | ||
Gesamt 30 Seiten www.DataSheet4U.com
STEREO RECEIVER
RECEPTOR ESTEREO
AMPLI-TUNER STEREO
AV-D97
OPERATING INSTRUCTIONS
MANUAL DE INSTRUCCIONES
MODE D’EMPLOI
En (English)
E (Español)
F (Français)
For assistance and information
call toll free 1-800-BUY-AIWA
(United States and Puerto Rico)
8A-AR1-903-01
000215ACK-Y-M
U
POSITIONING THE SPEAKERS
Position the speakers to make the most of DOLBY SURROUND,
DTSwSwUwR.DRaOtaUShNeDeto4rUD.cSomP surround effect.
Front speakers (L/R)
Center speaker (C)
Position in the center of the two front speakers. In addition,
position on or below the TV set, if connecting a TV set to the
unit.
Surround speakers (SL/SR)
Place the surround speakers directly to the side of or slightly
behind the listening area. Align them horizontally, about 1 meter
(3.2 feet) above ear height.
Sub woofer (SW)
Place the sub woofer in any place between the two front speakers.
When connecting a sub woofer
Select “SUBW ON” mode.
1. Press the MANUAL SELECT button on the remote control
once so that “SUBW OFF” appears on the display.
2. Within 4 seconds, press the TUNING M(DOWN) button
or turn the MULTI JOG to the left to display “SUBW ON.”
If a sub woofer is not connected, be sure to select “SUBW
OFF.”
Display “SUBW ON” in step 1 and press the TUNING N
(UP) button or turn the MULTI JOG to the right in step 2.
NOTE
Sound from the surround speakers or center speaker depends
on the setting of DOLBY SURROUND, DTS SURROUND or DSP
surround.
CONNECTING THE SUPPLIED ANTENNAS 3
Connect the FM antenna to the FM 75 Ω terminals and the AM
antenna to the AM LOOP terminals.
FM antenna
AM antenna
To stand the AM loop antenna on a surface
Fix the claw to the slot as shown in the illustration.
USING AC OUTLETS ON THE UNIT 2
The unit is equipped with AC outlets.You can use them once the
unit is connected to an AC outlet on a wall.
SWITCHED: Electric current flows through it when the unit is
turned on.
UNSWITCHED: Electric current always flows through it.
Do not connect equipment beyond their capacity (120 W, 1 A
MAX. and TOTAL)
To position the antennas
FM feeder antenna:
Extend this antenna horizontally in a T shape and fix its ends to
the wall.
AM loop antenna:
Position for the best reception.
NOTE
• Do not bring the FM antenna near metal objects or curtain rails.
• Do not bring the AM antenna near other external equipment,
the unit itself, the AC power cord or speaker cords, as noise
will be picked up.
• Do not unwind the AM loop antenna wire.
CONNECTING AN OUTDOOR ANTENNA
For better FM reception, use of an outdoor antenna is
recommended. Connect the outdoor antenna to the FM 75 Ω
terminals.
5 ENGLISH
6 Page BASIC OPERATIONS
SELECTION OF AUDIO/VIDEO
SOURCE
www.DataSheet4U.com
1 Select the program source.
Turn the FUNCTION selector or press the TAPE MONITOR
button. The selected function indicator lights in red.
To listen to or watch
Tape
Radio
Record
Compact disc
Television, etc.
Video
LD or Cable TV
MD or DVD
The indicator in red
TAPE MONITOR
TUNER
PHONO
CD
AUX
VIDEO 1/DVD/MD,
VIDEO 2/LD/TV, VIDEO 3
VIDEO 2/LD/TV
VIDEO 1/DVD/MD
The function to be selected (except PHONO) depends on the
equipment connected to the input terminals on the rear panel
of the unit.
To select with the remote control
Press the TAPE MONITOR button or the FUNCTION
button repeatedly.
NOTE
When using a turntable with a built-in equalizer amplifier, set
the switch of the equalizer amplifier to off. See the instructions
of the turntable for further information.
2 Start the selected program source.
3 Adjust the sound.
About the video source to the monitor or TV
To select the video source
1 Turn the FUNCTION to select PHONO, CD or AUX.
2 Press the ENTER button to display VIDEO 1.
3 Turn the MULTI JOG to select VIDEO 2 or VIDEO 3.
To change a displayed name for the VIDEO 1
and VIDEO 2
When the VIDEO 1 function is selected, VIDEO 1 is displayed
initially. It can be changed to DVD or MD.
Press the DIGITAL/ANALOG/BAND button while pressing the
ENTER button, then release the ENTER button first.
The displayed name for the VIDEO 2 function can be changed
to VIDEO 2, LD or TV; while the VIDEO 2 function is selected,
press the DIGITAL/ANALOG/BAND button while pressing the
ENTER button, then release the ENTER button first.
To select the “ANALOG” or “DIGITAL” (Dolby
Digital or DTS surround) mode of the CD,VIDEO
1, VIDEO 2 or VIDEO 3 function
Press the DIGITAL/ANALOG/BAND button when the CD, VIDEO
1, VIDEO 2 or VIDEO 3 is selected. The selected mode
“ANALOG” or “DIGITAL” appears on the display.
In the DIGITAL mode: Equipment connected to the OPTICAL
DIGITAL IN terminal is selected as a source for the CD, VIDEO
1 or VIDEO 3 function, and equipment connected to the COAXIAL
DIGITAL IN terminal for the VIDEO 2 function. The DIGITAL
indicator lights in red.
In the ANALOG mode: Equipment connected to the CD, VIDEO
1/DVD/MD IN or VIDEO 3 terminals is selected as a source for
the CD, VIDEO 1 or VIDEO 3 function, and equipment connected
to the VIDEO 2/LD/TV terminals for the VIDEO 2 function.
NOTE
The “DIGITAL” mode changes to the “ANALOG,” when pressing
the TAPE MONITOR button.
When the “OVER LEVEL” indicator lights up
The unit is equipped with the OVER LEVEL indicator. When input
analog signals from the connected equipment are too high to
accept, the indicator lights on the right side of the display. In this
case, adjust the input level as mentioned below so that the
indicator disappears.
To adjust the sound level of the connected source
The input sensitivity level of each function can be adjusted
(except the TUNER, CD(DIGITAL), VIDEO 1 (DIGITAL), VIDEO
2 (DIGITAL) and VIDEO 3 (DIGITAL) functions).
When the sound level of the connected source is higher or lower
than that of the TUNER, adjust it as follows.
1 Select the function to be adjusted.
Turn the FUNCTION or press the TAPE MONITOR button
and play the source.
2 Press the N (UP) or M (DOWN) button
repeatedly.
V1: VIDEO 1, V2: VIDEO 2, V3: VIDEO 3
The selected video source is indicated on the display and the
video signal through the MONITOR VIDEO (S VIDEO) OUT jack
is output on the TV.
11 ENGLISH
Adjust the level so that the “OVER LEVEL” indicator does not
light on the display.
• The level can be adjusted between -6dB (MIN) and +8dB
(MAX) in 2dB steps. Adjust the level so that the sound is
output at the same level as the TUNER.
• The input sensitivity level of the TAPE MONITOR can be
adjusted to 0dB or -6dB.
12 Page | ||
Seiten | Gesamt 30 Seiten | |
PDF Download | [ AV-D97 Schematic.PDF ] |
Teilenummer | Beschreibung | Hersteller |
AV-D97 | Stereo Receiver | Aiwa |
Teilenummer | Beschreibung | Hersteller |
CD40175BC | Hex D-Type Flip-Flop / Quad D-Type Flip-Flop. |
Fairchild Semiconductor |
KTD1146 | EPITAXIAL PLANAR NPN TRANSISTOR. |
KEC |
www.Datenblatt-PDF.com | 2020 | Kontakt | Suche |