Datenblatt-pdf.com


LM10 Schematic ( PDF Datasheet ) - National Semiconductor

Teilenummer LM10
Beschreibung Operational Amplifier and Voltage Reference
Hersteller National Semiconductor
Logo National Semiconductor Logo 




Gesamt 21 Seiten
LM10 Datasheet, Funktion
May 1998
LM10
Operational Amplifier and Voltage Reference
General Description
The LM10 series are monolithic linear ICs consisting of a
precision reference, an adjustable reference buffer and an
independent, high quality op amp.
The unit can operate from a total supply voltage as low as
1.1V or as high as 40V, drawing only 270µA. A complemen-
tary output stage swings within 15 mV of the supply termi-
nals or will deliver ±20 mA output current with ±0.4V satura-
tion. Reference output can be as low as 200 mV.
The circuit is recommended for portable equipment and is
completely specified for operation from a single power cell.
In contrast, high output-drive capability, both voltage and
current, along with thermal overload protection, suggest it in
demanding general-purpose applications.
The device is capable of operating in a floating mode, inde-
pendent of fixed supplies. It can function as a remote com-
parator, signal conditioner, SCR controller or transmitter for
analog signals, delivering the processed signal on the same
line used to supply power. It is also suited for operation in a
wide range of voltage- and current-regulator applications,
from low voltages to several hundred volts, providing greater
precision than existing ICs.
This series is available in the three standard temperature
ranges, with the commercial part having relaxed limits. In ad-
dition, a low-voltage specification (suffix “L”) is available in
the limited temperature ranges at a cost savings.
Features
n input offset voltage: 2.0 mV (max)
n input offset current: 0.7 nA (max)
n input bias current: 20 nA (max)
n reference regulation: 0.1% (max)
n offset voltage drift: 2µV/˚C
n reference drift: 0.002%/˚C
Connection and Functional Diagrams
Metal Can Package (H)
Small Outline Package (WM)
DS005652-1
Order Number LM10BH, LM10CH,
LM10CLH or LM10H/883
available per SMA# 5962-8760401
See NS Package Number H08A
Dual-In-Line Package (N)
DS005652-17
Order Number LM10CWM
See NS Package Number M14B
DS005652-15
Order Number LM10CN or LM10CLN
See NS Package Number N08E
© 1999 National Semiconductor Corporation DS005652
DS005652-16
www.national.com






LM10 Datasheet, Funktion
Typical Performance Characteristics (Op Amp) (Continued)
Minimum Supply Voltage
Minimum Supply Voltage
Minimum Supply Voltage
Frequency Response
DS005652-27
Output Impedance
DS005652-28
DS005652-29
Typical Stability Range
Large Signal Response
DS005652-30
DS005652-31
Comparator Response
Time For Various
Input Overdrives
DS005652-32
Comparator Response
Time For Various
Input Overdrives
DS005652-33
DS005652-34
DS005652-35
www.national.com
6

6 Page









LM10 pdf, datenblatt
Typical Applications (Note 10) (Pin numbers are for devices in 8-pin packages) (Continued)
Transmitter for Bridge Sensor
Precision Thermocouple Transmitter
DS005652-68
10 mAIOUT50 mA
500˚CTP1500˚C
*Gain Trim
DS005652-69
www.national.com
12

12 Page





SeitenGesamt 21 Seiten
PDF Download[ LM10 Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
LM10Operational Amplifier and Voltage ReferenceNational Semiconductor
National Semiconductor
LM10Low Power Op Amp and ReferenceLinear Technology
Linear Technology
LM10Operational Amplifier and Voltage Reference (Rev. E)Texas Instruments
Texas Instruments
LM100Voltage RegulatorIntersil
Intersil
LM100Voltage RegulatorNational Semiconductor
National Semiconductor

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche