|
|
PDF KEH-P4010RB Data sheet ( Hoja de datos )
| Número de pieza | KEH-P4010RB | |
| Descripción | (KEH-Px01xR) Cassette Player with RDS Tuner | |
| Fabricantes | Pioneer | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de KEH-P4010RB (archivo pdf) en la parte inferior de esta página. Total 20 Páginas | ||
|
No Preview Available !
MAN-KEH-P5010R-GB_B.fm Page 1 Friday, October 6, 2000 2:22 PM
Multi-CD control High power cassette player with RDS tuner
2SHUDWLRQ 0DQXDO
.(+35
.(+35
.(+35
.(+35%
Q
1 page  
MAN-KEH-P5010R-GB_B.fm Page 5 Friday, October 6, 2000 2:22 PM
&RQQHFWLQJ WKH 8QLWV
This product conforms to new cord colors.
Rear output
1RWH
Depending on the kind of vehicle, the function
of 3* and 5* may be different. In this case, be
sure to connect 2* to 5* and 4* to 3*.
Antenna jack
IP-BUS input (Blue)
This product
Multi-CD player
(sold separately)
IP-BUS cable
Cap (1*)
When not using this terminal,
do not remove the cap.
Connect leads of the
same color to each other.
Yellow (3*)
Back-up
(or accessory)
Yellow (2*)
To terminal always supplied
with power regardless of
ignition switch position.
A
Fuse
B
C
Red (5*)
Accessory
(or back-up)
Red (4*)
To electric terminal controlled
by ignition switch (12 V DC)
ON/OFF.
Black (ground)
To vehicle (metal) body.
Speaker leads
White
: Front left +
White/black : Front left -
Gray
: Front right +
Gray/black : Front right -
Green
: Rear left +
Green/black : Rear left -
Violet
: Rear right +
Violet/black : Rear right -
D
ISO connector
1RWH
In some vehicles, the ISO connector may be
divided into two. In this case, be sure to connect
to both connectors.
Power amp
A (sold separateley)
Connecting cords with RCA pin plugs
(sold separately)
Yellow/black
If you use a cellular telephone, connect it via the Audio
Mute lead on the cellular telephone. If not, keep the Audio
Mute lead free of any connections.
B
Blue/white
To system control terminal of the
power amp (Max. 300 mA 12 V DC).
System remote control
C
Rear speaker (Left)
Rear speaker (Right)
D
Blue/white (6*)
Perform these connections when using a
different amp (sold separately).
Blue/white (7*)
To Auto-antenna relay control terminal (max. 300 mA 12 V DC).
The pin position of the ISO connector will differ
depends on the type of vehicle. Connect 6* and 7*
when Pin 5 is an antenna control type. In another type
of vehicle, never connect 6* and 7*.
$
5 Page 
MAN-KEH-P5010R-GB_B.fm Page 11 Friday, October 6, 2000 2:22 PM
8VLQJ 5'6 )XQFWLRQV
7$ )XQFWLRQ
The TA (Traffic Announcement standby) function lets you receive traffic
announcements automatically, no matter what source you are listening to. The TA
function can be activated for either a TP station (a station that broadcasts traffic
information) or an enhanced other network’s TP station (a station carrying information
which cross-references TP stations).
6pvhvt9rhpvhvtÃurÃU6ÃApv
UrÃvÃhÃUQÃ
Ã@PIÃUQÃhv
The “TP” indicator lights when the tuner is tuned to a TP station or an enhanced other
network's TP station.
! 6pvhrÃurÃU6Ãspv
“TA”
The “TA” indicator lights, indicating that the tuner is waiting for traffic announcements.
Repeat the preceding operation when no traffic announcement is being received to
deactivate the TA function.
1RWH
• The system switches back to the original source following traffic announcement reception.
• The TA function can be activated from sources other than tuner if the tuner was last set to
the FM band but not if it was last set to the MW/LW band.
• If the tuner was last set to FM, turning on the TA function lets you operate other tuning
functions while listening to sources other than tuner.
• Only TP or EON TP stations are tuned in during the Seek Tuning mode when the “TA”
indicator is ON.
• Only TP or EON TP stations are stored by BSM when the “TA” indicator is ON.
8hpryvtÃU
hssvpÃ6prr
* Q
rÃurÃU6ÃiÃuvyrÃhÃ
hssvpÃhprrÃvÃirvtÃ
rprvrqÃÃphpryÃurÃ
hprrÃhqÃ
r
ÃÃurÃ
vtvhyÃ
pr
The announcement is canceled but the tuner remains in the TA mode until the TA
button is pressed again.
6qwvtÃur ÃU6ÃWyr
When a traffic announcement begins, the volume adjusts automatically to a preset
level to enable you to hear the announcement clearly.
* TrÃurÃyrÃiÃhqwvtÃvÃq
vtÃ
rprvÃsÃhÃ
hssvpÃhprr
The newly set volume is stored in memory and recalled for subsequent traffic
announcements.
UQÃ6yh
ÃApv
About 30 seconds after the “TP” indicator is extinguished due to a weak signal, a
5 second beep sounds to remind you to select another TP or EON TP station.
* DsÃÃh
rÃyvrvtÃÃurÃr
ÃrÃvÃhur
ÃUQÃhvÃ
Ã@PIÃUQÃhv
In sources other than tuner, the tuner automatically seeks out the TP station with the
strongest signal in the current area 10 (or 30)* seconds after “TP” disappears from the
display.
à UvrÃhxrÃirs
rÃTrrxÃirtv
TA function ON
10 seconds
TA, AF functions ON
30 seconds
11 Page | ||
| Páginas | Total 20 Páginas | |
| PDF Descargar | [ Datasheet KEH-P4010RB.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| KEH-P4010R | Multi CD Control High Power Cassette Player | Pioneer |
| KEH-P4010R | (KEH-Px01xR) Cassette Player with RDS Tuner | Pioneer |
| KEH-P4010RB | Multi CD Control High Power Cassette Player | Pioneer |
| KEH-P4010RB | (KEH-Px01xR) Cassette Player with RDS Tuner | Pioneer |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |