|
|
Número de pieza | MB95156M | |
Descripción | 8-bit Microcontroller | |
Fabricantes | Fujitsu Media Devices | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de MB95156M (archivo pdf) en la parte inferior de esta página. Total 30 Páginas | ||
No Preview Available ! FUJITSU SEMICONDUCTOR
DATA SHEET
DS07-12613-3E
8-bit Microcontroller
CMOS
F2MC-8FX MB95150M Series
www.DataSheetM4U.coBm 95156M/F156M/F156N/F156J/FV100D-103
■ DESCRIPTION
The MB95150M series is general-purpose, single-chip microcontrollers. In addition to a compact instruction set,
the microcontrollers contain a variety of peripheral functions.
Note : F2MC is the abbreviation of FUJITSU Flexible Microcontroller.
■ FEATURE
• F2MC-8FX CPU core
Instruction set optimized for controllers
• Multiplication and division instructions
• 16-bit arithmetic operations
• Bit test branch instruction
• Bit manipulation instructions etc.
• Clock
• Main clock
• Main PLL clock
• Sub clock
• Sub PLL clock
(Continued)
Be sure to refer to the “Check Sheet” for the latest cautions on development.
“Check Sheet” is seen at the following support page
URL : http://www.fujitsu.com/global/services/microelectronics/product/micom/support/index.html
“Check Sheet” lists the minimal requirement items to be checked to prevent problems beforehand in system
development.
Copyright©2006-2007 FUJITSU LIMITED All rights reserved
1 page MB95150M Series
■ OSCILLATION STABILIZATION WAIT TIME
The initial value of the main clock oscillation stabilization wait time is fixed to the maximum value. The maximum
value is shown as follows.
Oscillation stabilization wait time
(214−2) /FCH
Remarks
Approx. 4.10 ms (at main oscillation clock 4 MHz)
■ PACKAGES AND CORRESPONDING PRODUCTS
www.DataSheet4U.com
Package
Part number MB95156M
MB95F156M/F156N/F156J
FPT-48P-M26
FPT-52P-M01
BGA-224P-M08
: Available
: Unavailable
MB95FV100D-103
5
5 Page MB95150M Series
■ I/O CIRCUIT TYPE
Type
Circuit
X1 (X1A)
A
X0 (X0A)
Clock input
N-ch
Standby control
www.DataSheet4U.Bcom
Mode input
Reset input
B’ Reset output
N-ch
R Pull-up control
P-ch
P-ch
Digital output
Digital output
N-ch
D
Analog input
Remarks
• Oscillation circuit
• High-speed side
Feedback resistance : approx. 1 MΩ
• Low-speed side
Feedback resistance : approx. 10 MΩ
• Only for input
• Hysteresis input
• Hysteresis input
• Reset output
• CMOS output
• Hysteresis input
• Analog input
• With pull-up control
• Automotive input
A/D control
Standby control
External
interrupt control
R
P-ch
P-ch
G N-ch
Standby control
R
P-ch
H
Standby control
P-ch
N-ch
Automotive input
Hysteresis input
Pull-up control
Digital output
Digital output
CMOS input
Hysteresis input
Automotive input
Pull-up control
Digital output
Digital output
• CMOS output
• CMOS input
• Hysteresis input
• With pull-up control
• Automotive input
• CMOS output
• Hysteresis input
• With pull-up control
• Automotive input
Hysteresis input
Automotive input
(Continued)
11
11 Page |
Páginas | Total 30 Páginas | |
PDF Descargar | [ Datasheet MB95156M.PDF ] |
Número de pieza | Descripción | Fabricantes |
MB95156M | 8-bit Microcontroller | Fujitsu Media Devices |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |