|
|
PDF MB95F134MBS Data sheet ( Hoja de datos )
| Número de pieza | MB95F134MBS | |
| Descripción | 8-bit Microcontrollers | |
| Fabricantes | Fujitsu Media Devices | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de MB95F134MBS (archivo pdf) en la parte inferior de esta página. Total 30 Páginas | ||
|
No Preview Available !
FUJITSU SEMICONDUCTOR
DATA SHEET
DS07-12621-1E
8-bit Microcontrollers
CMOS
F2MC-8FX MB95130MB Series
MB95136MB/F133MBS/F133NBS/F133JBS/F134MBS/F134NBS/F134JBS/
www.DataSheetM4U.Bcom95F136MBS/F136NBS/F136JBS/F133MBW/F133NBW/F133JBW/F134MBW/
MB95F134NBW/F134JBW/F136MBW/F136NBW/F136JBW/FV100D-103
■ DESCRIPTION
The MB95130MB series is general-purpose, single-chip microcontrollers. In addition to a compact instruction set,
the microcontrollers contain a variety of peripheral functions.
Note : F2MC is the abbreviation of FUJITSU Flexible Microcontroller.
■ FEATURES
• F2MC-8FX CPU core
Instruction set optimized for controllers
• Multiplication and division instructions
• 16-bit arithmetic operations
• Bit test branch instruction
• Bit manipulation instructions etc.
• Clock
• Main clock
• Main PLL clock
• Sub clock (for dual clock product)
• Sub PLL clock (for dual clock product)
(Continued)
Be sure to refer to the “Check Sheet” for the latest cautions on development.
“Check Sheet” is seen at the following support page
URL : http://www.fujitsu.com/global/services/microelectronics/product/micom/support/index.html
“Check Sheet” lists the minimal requirement items to be checked to prevent problems beforehand in system
development.
Copyright©2007 FUJITSU LIMITED All rights reserved
1 page  
MB95130MB Series
(Continued)
Part number
MB95136MB
Parameter
MB95
F133MBS/
F134MBS/
F136MBS
MB95
F133NBS/
F134NBS/
F136NBS
MB95
F133MBW/
F134MBW/
F136MBW
MB95
F133NBW/
F134NBW/
F136NBW
MB95
F133JBS/
F134JBS/
F136JBS
MB95
F133JBW/
F134JBW/
F136JBW
8/16-bit
compound
timer
(1 channel)
Each channel of the timer can be used as “8-bit timer x 2 channels” or “16-bit timer x 1 channel”.
Built-in timer function, PWC function, PWM function, capture function and square wave-form output
Count clock: 7 internal clocks and external clock can be selected.
16-bit PPG
www.DataSheet4U.c(o1mchannel)
PWM mode or one-shot mode can be selected.
Counter operating clock: Eight selectable clock sources
Support for external trigger start
8/16-bit PPG Each channel of the PPG can be used as “8-bit PPG x 2 channels” or “16-bit PPG x 1 channel”.
(1 channel) Counter operating clock: Eight selectable clock sources
Watch
counter
(for dual
clock
product)
Count clock : Four selectable clock sources (125 ms, 250 ms, 500 ms, or 1 s)
Counter value can be set from 0 to 63. (Capable of counting for 1 minute when selecting clock
source 1 second and setting counter value to 60)
(1 channel)
Watch
prescaler
(for dual
clock
Four selectable interval times (125 ms, 250 ms, 500 ms, or 1 s)
product)
(1 channel)
External
interrupt
(8 channels)
Interrupt by edge detection (rising, falling, or both
Can be used to recover from standby modes.
edges
can
be
selected.)
Supports automatic programming, Embedded AlgorithmTM *4
Write/Erase/Erase-Suspend/Resume commands
A flag indicating completion of the algorithm
Number of write/erase cycles (Minimum) : 10000 times
Flash memory Data retention time : 20 years
Erase can be performed on each block
Block protection with external programming voltage
Flash Security Feature for protecting the content of the Flash
(MB95F136MBS/F136NBS/F136JBS/F136MBW/F136NBW/F136JBW)
Standby mode Sleep, stop, watch (for dual clock product), and timebase timer
*1 : For ROM capacity and RAM capacity, refer to “■ MEMORY LINEUP”.
*2 : For details of option, refer to “■ MASK OPTION”.
*3 : Specify clock mode when ordering MASK ROM.
*4 : Embedded Algorithm is a trade mark of Advanced Micro Devices Inc.
Note : Part number of evaluation product in MB95130MB series is MB95FV100D-103.
When using it, the MCU board (MB2146-303A) is required.
5
5 Page 
MB95130MB Series
(Continued)
Pin no.
SSOP*1 SOP*2
Pin name
I/O
circuit
type*3
Function
24
23 P10/UIO
G
General-purpose I/O port
Shared with UART/SIO ch.0 data input (UI0)
25 24 P11/UO0
General-purpose I/O port
Shared with UART/SIO ch.0 data output (UO0)
27
www.DataSheet4U.com
25
P12/UCK0/
EC0
General-purpose I/O port
Shared with UART/SIO ch.0 clock I/O (UCK0) and 8/16-bit compound
timer ch.0 clock input (EC0)
28
26
P13/TRG0/
ADTG
H
General-purpose I/O port
Shared with 16-bit PPG ch.0 trigger input (TRG0) and A/D converter
trigger input (ADTG)
29 27 P14/PPG0
General-purpose I/O port
Shared with 16-bit PPG ch.0 output (PPG0)
30 28
P15
General-purpose I/O port
19,26 ⎯
NC
⎯
Internally connected pins.
Be sure to leave it open.
*1 : FPT-30P-M02
*2 : FPT-28P-M17
*3 : For the I/O circuit type, refer to “■ I/O CIRCUIT TYPE”.
11
11 Page | ||
| Páginas | Total 30 Páginas | |
| PDF Descargar | [ Datasheet MB95F134MBS.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| MB95F134MBS | 8-bit Microcontrollers | Fujitsu Media Devices |
| MB95F134MBW | 8-bit Microcontrollers | Fujitsu Media Devices |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |