|
|
PDF MPP683x2xxxx Data sheet ( Hoja de datos )
| Número de pieza | MPP683x2xxxx | |
| Descripción | Plastic Flim Capacitors | |
| Fabricantes | Camel | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de MPP683x2xxxx (archivo pdf) en la parte inferior de esta página. Total 2 Páginas | ||
|
No Preview Available !
CAMEL TECHNOLOGY
PLASTIC FILM CAPACITORS
METALLIZED POLYPROPYLENE FILMPACITOR
Outline Drawing
Loose
W max
T max
Taped
W
Construction
T
H
MPP
Radial dipped
Appearance
1
1
0
0
03VJM©PP
1
2
0
5
04VJM©PP
474J ©
400VMPP
www.DataSheet4U.com
P±1.0
Ød±00.5 P
MPP are constructed with metallized polypropylene film
dielectric ,copperply lead and epoxy resin powder coating.
They are suitable for blocking, by-pass, coupling,
decoupling, filtering, timing, tuning temperature
compensation, and ideal for use in telecommunication
equipments, data processing equipments, industrial
instruments, automatic control system and other general
electronic equipments.
FEATURES:
Low loss at high frequency
Small inherent temperature rise
Flame retardant epoxy resin powder coating (UL94/V-0)
Direct welding
Single side metallized
Widely used in high frequency, DC, AC and pulse circuits
SPECIFICATION:
1. OPERATING TEMPERATURE: -40℃~85℃
2. CAPACITANCE RANGE:0.01µF~3.3µF
3. CAPACITANCE TOLERANCE:±5%(J),±10%(K),
±20%(M)
4. RATED VOLTAGE(RV): 100VDC, 250VDC,
400VDC,630VDC
5. DISSIPATION FACTOR: 0.1% MAX AT 1KHZ, 25℃
6. INSULATION RESISTANCE(IR):>30000 MΩ (C≦0.33µF)
>10000 MΩ·µF (C>0.33µF)
PERFORMANCE
Test Characteristics
Withstand voltage: Between terminals
Withstand voltage: Between terminals & enclosure
Insulation resistance: Between terminals
Insulation resistance: Between terminals
& enclosure
Heat proof: Insulation resistance at 85℃
Heat proof:
Rate of variation of capacitance at 85℃
Humidity test: Appearance
Humidity test: Withstand voltage
Humidity test: Insulation resistance
Humidity test: Dissipation factor
Humidity test: Rate of variation capacitance
Reference Standard
Test Methods JIS C 5102
Apply 2.0 times of rated voltage for 60 sec. charge
discharge current must be 1A max
Apply 2.0 times of rated voltage for 1 to 5 sec
Apply rated voltage
±15% for 60 sec. when rated voltage under 100V.
Apply 100V ±15% when rated voltage from 100V to
500V at 20℃
Testing temperature: 85±2℃.
Temperature: 40±2℃; Humidity: 90-95% RH
+24
Testing time: 500 - 0 Hrs.
Apply voltage: rated voltage. After testing, leave it for
about 16 Hrs. at standard condition
Withstand voltage is 175% rated voltage, 60 sec.
Performance
Shall be no abnormality
Shall be no abnormality
≤0.33µF ≧45,000MΩ
>0.33µF ≧15,000MΩ•µF
≤0.33µF≧4500MΩ at 85℃
>0.33µF≧1500MΩ•F at 85℃
0%
Within-5% of the value before test
Shall be no abnormality
Shall be no abnormality
≤0.33µF≧15000MΩ
>0.33µF≧5000MΩ•µF
0.0015 (0.15%) Max.
Within ±5% of the value before test
GB 10190( IEC 60384-16) / JIS 5102
56
1 page | ||
| Páginas | Total 2 Páginas | |
| PDF Descargar | [ Datasheet MPP683x2xxxx.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| MPP683x2xxxx | Plastic Flim Capacitors | Camel |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |