|
|
PDF EC1SM Data sheet ( Hoja de datos )
| Número de pieza | EC1SM | |
| Descripción | CRYSTAL | |
| Fabricantes | Ecliptek Corporation | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de EC1SM (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
|
No Preview Available !
Marketing Bulletin
DATE: May 1st, 2008
TO: All Sales Personnel
FROM:
www.DataSheet4U.com
RE:
Isaac Gonzalez
Product Termination
To all concerned parties,
This bulletin is to notify all customers of the discontinuation of the following Ecliptek
series effective May 1st, 2008:
Series Description
Recommended Replacement
EC1SM Resistance Welded Short HC-49/UP SMD Crystal E1S Series
EC2SM Resistance Welded HC-49/UP SMD Crystal
E2S Series
In compliance with our End of Life (EOL) policy, this will serve as advanced notice of
product termination. New orders will not be accepted after September 1st, 2009, with
delivery to conclude by December 31st, 2009.
If there are any questions pertaining to this bulletin, please feel free to contact me.
Thank you again for your cooperation.
Best Regards,
Isaac Gonzalez
Configuration Manager
Ecliptek Corporation
3545 CADILLAC AVENUE • COSTA MESA, CA 92626-1401 • (714) 433-1200 • Fax (714) 433-1234
1 page  
PART NUMBERING GUIDE
EC2SM A - T - 20 - 30.000M TR
FREQUENCY TOLERANCE / STABILITY
Blank=±50ppm at 25°C, ±100ppm from 0°C to 70°C
A=±50ppm at 25°C, ±100ppm from -20°C to 70°C
B=±50ppm at 25°C, ±100ppm from -40°C to 85°C
C=±30ppm at 25°C, ±50ppm from 0°C to 70°C
D=±30ppm at 25°C, ±50ppm from -20°C to 70°C
E=±30ppm at 25°C, ±50ppm from -40°C to 85°C
F=±15ppm at 25°C, ±30ppm from 0°C to 70°C
G=±15ppm at 25°C, ±30ppm from -20°C to 70°C
H=±15ppm at 25°C, ±30ppm from -40°C to 85°C
J=±15ppm at 25°C, ±20ppm from 0°C to 70°C
K=±15ppm at 25°C, ±20ppm from -20°C to 70°C
L=±15ppm at 25°C, ±20ppm from -40°C to 85°C
M=±10ppm at 25°C, ±15ppm from 0°C to 70°C
N=±10ppm at 25°C, ±15ppm from -20°C to 70°C
PACKAGING OPTIONS
Blank=Bulk, TR=Tape and Reel
FREQUENCY
LOAD CAPACITANCE
Blank=18pF (Standard), S=Series
XX=XXpF (Custom)
MODE OF OPERATION / CRYSTAL CUT
Blank=Fundamental / AT,
B=Fundamental / BT
T=Third Overtone / AT
www.DataSheet4U.com
MECHANICAL DIMENSIONS
ALL DIMENSIONS IN MILLIMETERS
OBSOLETESUGGESTED SOLDER PAD LAYOUT
ALL DIMENSIONS IN MILLIMETERS
TAPE AND REEL DIMENSIONS
ALL DIMENSIONS IN MILLIMETERS
Coplanarity: 0.36mm Maximum
Tolerances = ±0.2
TAPE
F
12±.2
A
24±.3
G
B0*
BC
11.5±.1 10.75±.1
HJ
1.5 +.1 A0*
D
4 ±.2
K
.4±.1
E
2±.1
L
K0*
ENVIRONMENTAL/MECHANICAL SPECIFICATIONS
PARAMETER
Fine Leak Test
Gross Leak Test
Mechanical Shock
Vibration
Solderability
Temperature Cycling
Resistance to Soldering Heat
Resistance to Solvents
SPECIFICATION
MIL-STD-883, Method 1014, Condition A
MIL-STD-883, Method 1014, Condition C
MIL-STD-202, Method 213, Condition C
MIL-STD-883, Method 2007, Condition A
MIL-STD-883, Method 2002
MIL-STD-883, Method 1010
MIL-STD-883, Method 210
MIL-STD-883, Method 215
REEL
R
2.5 MIN
M
1.5 MIN
S
10 MIN
N
50 MIN
T
30.4 MAX
MARKING SPECIFICATIONS
OP
20.2 MIN 13±.2
Q
40 MIN
U V QTY/REEL
360MAX 24.4+2-0 1,000
*Compliant to EIA-481A
Line 1: E XX.XXX M
M or Blank (No Marking)
Frequency in MHz
(5 Digits Maximum + Decimal)
MANUFACTURER
ECLIPTEK CORP.
CATEGORY
CRYSTAL
SERIES
EC2SM
800-ECLIPTEK www.ecliptek.com for latest revision
PACKAGE
HC-49/UP
CLASS
CR03
REV.DATE
03/06
Specifications subject to change without notice.
5 Page | ||
| Páginas | Total 5 Páginas | |
| PDF Descargar | [ Datasheet EC1SM.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| EC1SM | CRYSTAL | Ecliptek Corporation |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |