|
|
Número de pieza | LM285Z-1.2 | |
Descripción | Micropower Voltage Reference Diode | |
Fabricantes | National Semiconductor | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de LM285Z-1.2 (archivo pdf) en la parte inferior de esta página. Total 10 Páginas | ||
No Preview Available ! January 2000
LM185-1.2/LM285-1.2/LM385-1.2
Micropower Voltage Reference Diode
General Description
The LM185-1.2/LM285-1.2/LM385-1.2 are micropower
2-terminal band-gap voltage regulator diodes. Operating
over a 10 µA to 20 mA current range, they feature exception-
ally low dynamic impedance and good temperature stability.
On-chip trimming is used to provide tight voltage tolerance.
Since the LM185-1.2 band-gap reference uses only transis-
tors and resistors, low noise and good long term stability re-
sult.
Careful design of the LM185-1.2 has made the device ex-
ceptionally tolerant of capacitive loading, making it easy to
use in almost any reference application. The wide dynamic
operating range allows its use with widely varying supplies
with excellent regulation.
The extremely low power drain of the LM185-1.2 makes it
useful for micropower circuitry. This voltage reference can be
used to make portable meters, regulators or general purpose
analog circuitry with battery life approaching shelf life.
Further, the wide operating current allows it to replace older
references with a tighter tolerance part.
The LM185-1.2 is rated for operation over a −55˚C to 125˚C
temperature range while the LM285-1.2 is rated −40˚C to
85˚C and the LM385-1.2 0˚C to 70˚C. The LM185-1.2/
LM285-1.2 are available in a hermetic TO-46 package and
the LM285-1.2/LM385-1.2 are also available in a low-cost
TO-92 molded package, as well as SO and SOT-23. The
LM185-1.2 is also available in a hermetic leadless chip car-
rier package.
Features
n ±4 mV (±0.3%) max. initial tolerance (A grade)
n Operating current of 10 µA to 20 mA
n 0.6Ω max dynamic impedance (A grade)
n Low temperature coefficient
n Low voltage reference — 1.235V
n 2.5V device and adjustable device also available
n LM185-2.5 series and LM185 series, respectively
Connection Diagrams
T0-92
Plastic Package (Z)
SOT23
DS005518-10
Bottom View
Order Number LM285Z-1.2,
LM285BXZ-1.2, LM285BYZ-1.2
LM385Z-1.2, LM385BZ-1.2
LM385BXZ-1.2 or LM385BYZ-1.2
See NS Package Number Z03A
DS005518-33
* Pin 3 is attached to the Die Attach Pad (DAP) and should be connected
to Pin 2 or left floating.
Order Number LM385M3-1.2
See NS Package Number MA03B
© 2000 National Semiconductor Corporation DS005518
www.national.com
1 page Typical Applications
Wide Input
Range Reference
Micropower Reference
from 9V Battery
Reference from
1.5V Battery
DS005518-8
Micropower* 5V Regulator
DS005518-22
DS005518-23
Micropower* 10V Reference
*IQ ≅ 30 µA
*IQ ≅20 µA standby current
DS005518-24
Precision 1 µA to 1 mA Current Sources
DS005518-25
DS005518-26
5
DS005518-27
www.national.com
5 Page |
Páginas | Total 10 Páginas | |
PDF Descargar | [ Datasheet LM285Z-1.2.PDF ] |
Número de pieza | Descripción | Fabricantes |
LM285Z-1.2 | MICROPOWER VOLTAGE REFERENCE DIODES | Motorola Inc |
LM285Z-1.2 | Micropower Voltage Reference Diode | National Semiconductor |
LM285Z-1.2 | MICROPOWER VOLTAGE REFERENCE DIODES | ON Semiconductor |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |