Datenblatt-pdf.com


FP0 Schematic ( PDF Datasheet ) - ETC

Teilenummer FP0
Beschreibung Suitable
Hersteller ETC
Logo ETC Logo 




Gesamt 17 Seiten
FP0 Datasheet, Funktion
FP0
Suitable for installation virtually anywhere.
I/O10 points Up to 128 I/O
www.DataSheet4U.com
90mm
3.543
inch
25
mm
.984inch
105mm
4.134inch
You save this much space!
The left photo shows the FP0-C14RS control unit.
The right photo shows an example of expanding by adding three FP0-E32T
expansion units to the FP0-C32T control unit.
I Features
1. Measures only W25 ҂ H90 ҂ D60 mm
W.984 ҂ H3.543 ҂ D2.362 inch *
The units compact sizing which has never
been thought possible on conventional
small PLCs makes it very easy for
incorporation into equipment and helps
reduce the size of control panels.
* C32 series is 30 mm 1.181inch wide.
2. Expandable 128 points by adding
three units.
This PLC is a stacking expansion type
which requires no cables for expansion.
The total width is only 105 mm 4.134inch
when three units are added.
3. High-speed operation: Scanning
speed is approx. 1 ms.
A 500-step program can be processed
only in 1 ms, a speedy processing time
for small PLCs.
4. Terminals are designed for tidy styling.
The relay output terminals use European
style terminal blocks, so it is possible for
the terminals to be connected without
terminal blocks. Molex connector type is
also available for mass-production
equipment. Transistor output type is
supplied with wire-pressed terminal
cable connectors.
5. Allows the use of the programming
capacity 10k stepstype
Standard equipped with clock/calendar
function timer and RS232C port.
Operation memory is backed up by
secondary battery.
I Power Supply Specifications
Item Description
Power supply
24 V DC
Input
24 V DC ±common
Output
Relay 2 A (resistor load)/Transistor 0.1 A (varies
with different models)
I Performance Specifications
Item Description (Relay type/Transistor type)
Number of I/O points
10 points/14 points/16 points/32 points
Expansion
Max. 3 units
Total points: Max. 128 points
Operation speed
0.9 µs/step
Internal memory
EEP-ROM
Memory capacity
2.7k steps/5k steps/10k steps
(varies with different types)
Operation
memory
Internal relay
Timer/Counter
Data register
1008 points
144 points in total
1660 words/6144 words/16384 words
(varies with different types)
I Applicable Functions
Item Description
Pulse catch/Interrupt input 6 points in total
Analog I/O
Available by adding analog unit
Volume input
High-speed counter
Pulse output note)
1 phase 4 points/
2 phases 2 points (10 kHz in total)
2 points (10 kHz in total)
RS232C port
1 ch is equipped to the models having part
numbers which end in C or 10k type.
3P terminal blocks (made by Phoenix Contact Co.)
Note) Transistor type only
I Applicable Network
Item Description
Remote I/O
Inter-PLC link
CC-Link, Slave station of MEWNET-F
(use CC-Link unit/I/O link unit)
Computer link
Linkable with tool port or RS232C port (C type)
Modem connection
Available, Type with RS232C port can also send data.
I Other Built-in Functions
Item
Description
Program block-edit during RUN Available
Constant scan
Available
Adjustable input time filtering
Clock/Calendar function
(built-in with 10k type)






FP0 Datasheet, Funktion
FP0 Specications
I Performance Specications
Item
Model C10 series
C14 series
C16 series
C32 series
(Relay output type only) (Relay output type only) (Transistor output type only) (Transistor output type only)
S-LINK type
T32 series
(Transistor output type only)
Programming method / Control method
Relay symbol/Cyclic operation
No expansion
(control unit only)
10 points
14 points
16 points
32 points S-LINK section: max.128 points 32 points
[Input: 6, NPN Output: 4] [Input: 8, NPN Output: 6] [Input: 8, NPN Output: 8] [Input: 16, NPN Output: 16] [Input: 64, NPN Output: 64] [Input: 16, NPN Output: 16]
Number of
I/O points
W/expansion 1
*Same type of control and expansion units Max. 58 points Max. 62 points Max. 112 points Max. 128 points Expansion section: Max. 128 points
W/expansion 2
*Mix type of relay and transistor units
Max.96 points
Max. 106 points Max. 110 points Max. 112 points Max. 128 points
Max. 128 points
www.DataSPPhrreooeggtrr4aaUmm.cmcoaempmacoirtyy
EEP-ROM(no back up battery required)
2.7k steps
5k steps
10k steps
Number of Basic
instructions High-level
83
115
Operation speed (central value/step)
0.9 µs/step (for basic instrction)
Intermal relay (R)
1008 points
Operation
memory
points
Relay
Memory
area
Timer/Counter (T/C)
Data register (DT)
Index register (IX,IY)
144 points
Timer: Counts up to (units: 1 ms, 10 ms, 100 ms, or 1 s) × 32767.
Counter: Counts up to 32767.
1660 words
6144 words
2 words
16384 words
Master control relay points (MCR)
32 points
Number of labels (JMP and LOOP)
64 labels
255 labels
Differential points
Unlimited number of points
Number of step ladder
128 stages
704 stages
Number of subroutines
16 subroutines
100 subroutines
High speed counter
1 phase/4 points (10kHz in total) or 2 phases / 2 points (2 kHz in total)*
Available(same as 32 points series)
Pulse output
2 points(10 kHz* in total) ,enable to control 2
channels individually*
Available
(same as 32 points series)
PWM output
0.15 Hz to 1kHz
Available(same as 32 points series)
Special
functions
Pulse catch input/interrupt input
Interrupt program
Periodical interrupt
6 points(with high speed counter)
7 programs (external 6 points, internal 1 point)
0.5 ms to 30s
Available(same as 32 points series)
1 program (internal 1 point) Available(same as 32 points series)
Constant scan
Available
RS232C port
One RS232C port is mounted on each of the models FP0- C10CR, C14CR,C16CT, C16CP, C32CT, C32CP, T32CT, T32CP and SL1 type (3P terminal block)
Transmission speed (Baud rate): 300 to 19200 bit/s, Transmission distance: 15 m 9.843 ft
Communication method: half duplex
Program and system register
Stored program and system register in EEP-ROM
Memory
back up
Maintenance
Operation
memory
Self-diagnostic function
Stored fixed area in EEP-ROM
Counter: 4 points
Internal relay: 32 points
Data register: 8 words
Stored fixed area in EEP-ROM
Couner: 16 points
Internal relay: 128 points
Date register: 32 words
Backup is provided by
secondary battery. The
holding range for the
timers, counters, internal
relays, and data regis-
ters are specified with
the programming tool.
(By using exclusive instructions, the EEP-ROM is possible
to write and read data register.)
Watchdog timer, program syntax check
Clock/Calender function
— Available
Other functions
Runtime editing, password setting
* For the limitations while operating units, see the manual.
I General Specications
Item
Rated voltage
Operating voltage range
Allowed momentary
10 points, 14 points type
power off time
16 points, 32 points, S-LINK type
Ambient temperature
Storage temperature
Ambient humidity
Storage humidity
Breakdown voltage
Insulation resistance
Vibration resistance
Shock resistance
Noise immunity
Operating condition
Description
24 V DC
21.6 to 26.4 V DC
5 ms (at 21.6 V), 10 ms (at 24 V)
10 ms (at 21.6 V / 24 V)
0 to +55°C 32 to +131°F
–20 to +70°C –4 to +158°F
30 to 85% RH (non-condensing)
30 to 85% RH (non-condensing)
Between input/output terminals and power/ground terminals: 500 V AC for 1 minute (for the relay output type, 1500 V AC for 1 minute)
Between input terminals and output terminals: 500 V AC for 1 minute (for the relay output type, 1500 V AC for 1 minute)
Between input/output terminals and power/ground terminals: Over 100 M(using a 500V DC megger)
Between input terminals and output terminals: Over 100 M(using a 500V DC megger)
10 to 55 Hz, 1 sweep/min. Double amplitude of 0.75 mm .030 inch, 10 min. on 3 axes
98 m/s2 or more, 4 times on 3 axes
1,000 V(p-p) with pulse widths 50 ns and 1 µs (using a noise simulator)
Free from corrosive gasses and excessive dust

6 Page









FP0 pdf, datenblatt
FP0 Dimensions
I Control Units and Expansion Units * For the relay output type, the terminal block type is listed as the representative type.
FP0-C10RS/C10RM/C10CRS/C10CRM/C14RS/C14RM/C14CRS/C14CRM
FP0-E8RS/E8RM/E8YRS/E16RS/E16RM
G External dimensions (unit: mm inch)
Input terminal block note 2)
3.5 60.0
.138 2.362
25.0
.984
www.DataSheet4U.com
90.0
3.543
RUN
PROG
ERROR
ALARM
RUN
PROG.
Output terminal block
RS232C port (C10CR, C14CR only)
Notes:
1) DIN rail is attached on the center of the unit.
2) The FP0-E8YRS is not equipped with an input
terminal block.
<Reference measuring for wiring>
(10)
(.394)
60.0
2.362
EXPANSION
CONNECTOR
note 1)
90.0
3.543
Approx.
130.0
5.118
(17)
(.669)
(9)
(.354)
(7.5)
DIN standard rail (.295)
(DIN EN50022 35 mm
1.378 inch width) attachment gap
Terminal array
C10RS/C10RM/ C14RS/C14RM/
C10CRS/C10CRM C14CRS/C14CRM
X0
X1
X2
X3
X4
X5
(NC)
(NC)
COM
X0
X1
X2
X3
X4
X5
X6
X7
COM
Y0
Y1
(NC)
(NC)
COM
Y2
COM
Y3
COM
Y0
Y1
Y2
Y3
COM
Y4
COM
Y5
COM
E8RS/E8RM E16RS/E16RM/E8YRS
X0
X1
X2
X3
(NC)
(NC)
(NC)
(NC)
COM
X0
X1
X2
X3
X4
X5
X6
X7
COM
Y0
Y1
Y2
Y3
(NC)
(NC)
(NC)
(NC)
COM
Y0
Y1
Y2
Y3
Y4
Y5
Y6
Y7
COM
FP0-C16T/C16P/C16CT/C16CP/E16T/E16P/E8X/E8YT/E8YP
G External dimensions (unit: mm inch)
3.5
.138 60.0
2.362
note 3)
Input connector
25.0
.984
RUN
PROG.
ERROR
XO-7
0
1
2
3
4
5
6
7
ALARM
RUN
90.0
3.543
PROG.
YO-7
0
1
2
3
4
5
6
7
<Reference measuring for wiring> G Terminal array
G RS232C port
18
.709
60.0
2.362
EXPANSION
CONNECTOR
Input (8 points/common)
X0 X1
X2 X3
Terminal array
X4 X5
note 1)
90.0
3.543
Approx.
130.0
5.118
X6 X7
COM COM
Output (8 points/common)
Y0 Y1
Y2 Y3
SG
RD
SD
note 2)
Output connector
RS232C port (C16CT/C16CP only)
Notes:
1) DIN rail is attached on the center of the unit.
2) The FP0-E8X has no output connector.
3) The FP0-E8YT and E8YP has no input connector.
(17)
(.669)
(9)
(.354)
(7.5)
(.295)
DIN standard rail
(DIN EN50022 35 mm
1.378 inch width) attachment gap
Y4 Y5
Y6 Y7
(+) ()
Note: Two COM terminals on the input circuit are connected
inside the unit.
FP0-C32T/C32P/C32CT/C32CP/E32T/E32P/E16X/E16YT/E16YP
G External dimensions (unit: mm inch) <Reference measuring for wiring> G Terminal array
G RS232C port
3.5
.138 60.0
2.362
note 4)
Input connector
note 2)
30.0
1.181
90.0
3.543
XO-7
RUN
PROG.
ERROR
ALARM
RUN
PROG. YO-7
X8-F
Y8-F
0
1
2
3
4
5
6
7
8
9
A
B
C
D
E
F
0
1
2
3
4
5
6
7
8
9
A
B
C
D
E
F
18
.709
60.0
2.362
EXPANSION
CONNECTOR
note 1)
90.0
3.543
Approx.
130.0
5.118
Input (16 points/common) Terminal array
X0 X1
X2 X3
X4 X5
X6 X7
COM COM
X8 X9
XA XB
XC XD
XE XF
COM COM
Output (16 points/common)
SG
RD
SD
Y0 Y1 Y8 Y9
Y2 Y3 YA YB
note 3)
Output connector
RS232C port (C32CT/C32CP only)
Notes:
(17)
(.669)
1) DIN rail is attached on the center of the unit.
2) The FP0-E32T, E32P, E16X, E16YT and E16YP are
25 mm .984 inch each.
3) The FP0-E16X has no output connector.
4) The FP0-E16YT and E16YP have no input connector.
(9)
(.354)
(7.5)
(.295)
DIN standard rail
(DIN EN50022 35 mm
1.378 inch width) attachment gap
Y4 Y5 YC YD
Y6 Y7 YE YF
(+) () (+) ()
Notes:
1) Four COM terminals on the input circuit are connected
inside the unit.
2) Two (+) terminals and two () terminals on the output circuit
are connected respectively inside the unit.

12 Page





SeitenGesamt 17 Seiten
PDF Download[ FP0 Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
FP-010RE101M-0LFunctional Polymer CapacitorsFUJITSU
FUJITSU
FP-010RE221M-0LFunctional Polymer CapacitorsFUJITSU
FUJITSU
FP-010RE330M-0LFunctional Polymer CapacitorsFUJITSU
FUJITSU
FP-010RE471M-SLFunctional Polymer CapacitorsFUJITSU
FUJITSU
FP-010RE680M-0LFunctional Polymer CapacitorsFUJITSU
FUJITSU

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche