Datenblatt-pdf.com


FM-RX2-XXX Schematic ( PDF Datasheet ) - rfsolutions

Teilenummer FM-RX2-XXX
Beschreibung FM TRANSMITTER & RECEIVER MODULES
Hersteller rfsolutions
Logo rfsolutions Logo 




Gesamt 9 Seiten
FM-RX2-XXX Datasheet, Funktion
FM TRANSMITTER & RECEIVER
MODULES. (2ND GENERATION)
FEATURES
MINIATURE PACKAGE
PLUG IN COMPATIBLE WITH FM-TX1 / RX1
EMC CONFORMANT TO ETS 300-683
TYPE APPROVED TO ETS 300-220
DATA RATES TO 40KBIT/S
www.DataSheet4U.coUmSABLE RANGE TO 300 METRES
418 & 433.92MHZ VERSIONS.
SINGLE SUPPLY VOLTAGE 5V OR 3V
FULLY SCREENED
FM-TX2-XXX
FM-RX2-XXX
Transmitter - TX2
2 STAGE SAW CONTROLLED, FM
MODULATED AT UPTO 40KBIT/S
OPERATION FROM 2.2 TO 6 VOLTS
10mW ON 433.92MHZ (EUROPE) , 1mW ON
418MHZ (UK)
HIGH EFFICIENCY, >15% , DC --> RF
IMPROVED FREQUENCY AND DEVIATION
ACCURACY
2ND HARMONIC, < -60DBC
Receiver - RX2
DOUBLE CONVERSION FM SUPERHET
SAW FRONT END FILTER, IMAGE
REJECTION 50DB
SUPPLY 3.0 TO 6.0 VOLTS @ 13MA
40KBIT/S, -F VERSION , -100 DBM
SENSITIVITY @ 1PPM BER
14KBIT/S. -A VERSION , -107 DBm
SENSITIVITY @ 1PPM BER
LO LEAKAGE, < -60 DBM
Description
The TX2 and RX2 data link modules are a miniature PCB mounting UHF radio transmitter and receiver pair
which enable the simple implementation of a data link at upto 40 Kbit/s at distances upto 75 metres in-building
and 300 metres open ground.
Available for operation at 433.92 MHz in Europe and 418.00 MHz in the U.K., both modules combine full
screening with extensive internal filtering to ensure EMC compliance by minimising spurious radiations and
susceptibilities. The TX2 and RX2 modules will suit one-to-one and multi-node wireless links in applications
including car and building security, EPOS and inventory tracking, remote industrial process monitoring and
computer networking. Because of their small size and low power requirements, both modules are ideal for use
in portable, battery-powered applications such as hand-held terminals.
DS000022 Rev D July ‘99
©1999 REG No 277 4001, ENGLAND.
Page 1






FM-RX2-XXX Datasheet, Funktion
FM TRANSMITTER & RECEIVER
MODULES. (2ND GENERATION)
Module test circuits
FM-TX2-XXX
FM-RX2-XXX
www.DataSheet4U.com
fig.5: TX2 test circuit
fig.6: RX2 test circuit
The PNP transistor enables a CMOS compatible Carrier Detect signal to be derived from pin 3. If no CD signal required
pin 3 should be connected directly to pin 5 (Vcc)
Module mounting considerations
The modules may be mounted horizontally or vertically on an area of ground plane preferably
close to the antenna to minimise feed length. The receiver and it’s antenna should be kept away
from sources of interference (micro’s, SMPS etc.). The modules may be potted if required in a
viscous compound which can not enter the screen can..
Warning: Do NOT wash the modules. They are not hermetically sealed.
DS000022 Rev D July ‘99
©1999 REG No 277 4001, ENGLAND.
Page 6

6 Page







SeitenGesamt 9 Seiten
PDF Download[ FM-RX2-XXX Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
FM-RX2-XXXFM TRANSMITTER & RECEIVER MODULESrfsolutions
rfsolutions

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche