|
|
Número de pieza | iT3012 | |
Descripción | differential-to-single-ended amplifier | |
Fabricantes | Iterra | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de iT3012 (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
No Preview Available ! iT3012
8 GHz, Differential-to-Single-Ended Amplifier
Description
www.DataSheet4U.com
Features
The iT3012 is a packaged differential-to-single-ended amplifier designed for use as an optical
modulator predriver with limiting functionality in 10.7 Gb/s and 12.5 Gb/s (OC-192) optical
transmitters and receivers. It allows single-ended input signals of 350 mVpp to 900 mVpp or
differential signals of 250 mVpp to 1800 mVpp to be limited at a constant single-ended output
voltage of 1.9 Vpp. It provides output voltage control and allows external offset correction.
iT3012 also provides excellent linear performance when operating at lower output voltages.
Both AC and DC input coupling are allowed. DC-coupled SCFL differential input (input “high”
voltage = 0 V, input “low” voltage = -900 mV) is allowed.
Limiting function with 1.9 Vpp single-ended output
3 dB bandwidth: 8 GHz
Single-ended Gain: 17.5 dB
Standard bias supply levels: -5 V or -5.2 V, +5 V
Power consumption: 665 mW
Low group delay and jitter
Output voltage control
AC and DC input coupling (SCFL compatible)
AC and DC output coupling
Low-cost JEDEC QFP-N (MO-220) package
Absolute
Maximum
Ratings
Sym bol
Vee
Vcc
Vd
Vm
IDC IN (+),(-)
Tch
Tstg
Param eters/conditions
Pow er supply voltage
Pow er supply voltage
Applied voltage at data input (differential)
Applied voltage at data input (single ended)
Offset control current
Maximum channel temperature
Storage temperature
M in.
-8
0
-65
M ax.
0
8
3
1.5
5
150
150
Units
V
V
V
V
mA
°C
°C
Recommended
Operating
Conditions
Symbol
Tc
Vee
Vcc
Vcb2
Iee
Icc
VDC IN
Vctrl
Vm
Vd
Vindc
R
Parameters/conditions
Operating temperature range (Tcase)
Negative pow er supply voltage
Positive pow er supply voltage
First internal bias control voltage
Negative supply current
Positive supply current
Offset control voltage
Voltage control pin
Applied peak-peak voltage at data input (single ended)
Applied peak-peak voltage at data input (differential)
DC input voltage (w ith DC-coupled input)
Data bit rate
Min.
0
-5.45
4.75
86
30
-5
-2.7
350
250
-0.5
Typ.
-5
5
0
101
35
Max.
85
-4.75
5.25
116
40
5
0
900
1800
0
12.5
Units
oC
V
V
V
mA
mA
V
V
mV
mV
V
Gb/s
www.iterrac.com
This is a Production data sheet. See “Product Status Definitions”
on Web site or catalog for product development status.
August 17, 2005 Doc. 1192 Rev 9
1
iTerra Communications
2400 Geng Road, Ste. 100, Palo Alto, CA 94303
Phone (650) 424-1937, Fax (650) 424-1938
1 page Package Drawing,
Pinouts
iT3012
8 GHz, Differential-to-Single-Ended Amplifier
www.DataSheet4U.com
Pin Outs:
P1: GND
P2: Din (RF input)
P3: /Din (/RF input)
P4: GND
P5: /DCin
P6: Vee
P7: N/C
P8: N/C
P9: GND
P10: N/C
P11: Q (RF out)
P12: GND
P13: Vcb2
P14: Vctrl (voltage control)
P15: Vcc
P16: DCin
www.iterrac.com
This is a Production data sheet. See “Product Status Definitions”
on Web site or catalog for product development status.
August 17, 2005 Doc. 1192 Rev 9
5
iTerra Communications
2400 Geng Road, Ste. 100, Palo Alto, CA 94303
Phone (650) 424-1937, Fax (650) 424-1938
5 Page |
Páginas | Total 5 Páginas | |
PDF Descargar | [ Datasheet iT3012.PDF ] |
Número de pieza | Descripción | Fabricantes |
iT3010 | 10 GHz medium-gain differential amplifier | Iterra |
iT3010E | Medium gain differential amplifier | gigoptix |
iT3011 | 12.5-Gb/s high-sensitivity limiter amplifier | Iterra |
iT3011E | High-sensitivity limiter amplifier | gigoptix |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |