Datenblatt-pdf.com


iT4005D Schematic ( PDF Datasheet ) - Iterra

Teilenummer iT4005D
Beschreibung 12-Gb/s GaAs MMIC D flip-flop
Hersteller Iterra
Logo Iterra Logo 




Gesamt 6 Seiten
iT4005D Datasheet, Funktion
iT4005D
12.5 Gb/s GaAs MMIC D Flip-Flop
(Advanced Information)
Description
www.DataSheet4U.com
Features
The iT4005D is a high-speed D-type flip flop fabricated using 1-μm HBT GaAs technology. Its
high output voltage, excellent rise and fall time and the high eye diagram quality at all clock
frequencies makes the iT4005D suitable for very high speed and complex digital applications
such as decision circuits, waveform shaping, register implementation, and timing adjustment.
The device consists of a master-slave latch designed using an ECL topology guarantee high-
speed operation. The data and clock inputs and data outputs are DC coupled. At the data input
port, the iT4005D tolerates a wide range of operating conditions, and the internal 50-ohm
resistors avoid the need for external terminations for impedance matching. The iT4005D uses
SCFL I/O levels and allows either single-ended or differential data input and output. For the
clock, a single-ended, DC-coupled input with an internal 50-ohm resistor followed by a DC block
is provided. An amplitude of 700 mV peak-to-peak for the clock is recommended, although
depending on the operating frequency, a lower amplitude may be usable. An on-chip output
buffer provides an excellent eye diagram at a 12.5 GHz clock frequency.
™ 2-13 GHz clock frequency range
™ 900 mVpp single ended output dynamic
™ Output rise time (20%-80%): 25 ps
™ Output fall time (20%-80%): 24 ps
™ DC coupled clock input
™ DC coupled data input
™ 50 ohm matched DC-coupled data output
™ Differential or single-ended inputs
™ Low power consumption:
1 W at -5.2 V (VQH = 0.0 V, VQL = -0.9 V)
0.7 W at -4.5 V (VQH = 0.0 V, VQL = -0.6 V)
0.5 W at -4.0 V (VQH = 0.0 V, VQL = -0.4 V)
Device
Diagram
www.iterrac.com
This is an Advanced data sheet. See “Product Status Definitions” on
Web site or catalog for product development status.
October 5, 2005 Doc. 4047 Rev 0
1
iTerra Communications
2400 Geng Road, Ste. 100, Palo Alto, CA 94303
Phone (650) 424-1937, Fax (650) 424-1938






iT4005D Datasheet, Funktion
Recommended
Chip Mounting
www.DataSheet4U.com
iT4005D
12.5 Gb/s GaAs MMIC D Flip-Flop
(Advanced Information)
Pad Positions
And Chip
Dimensions
Chip size:
1600 μm ±10 μm x 2335 μm
±10 μm edge to edge
Chip thickness:
104 μm ±3 μm
Pad size:
100 μ m x 100 μm
RF pad pitch:
150 μm
Unlabeled pads are ground
and may be left floating
www.iterrac.com
This is an Advanced data sheet. See “Product Status Definitions” on
Web site or catalog for product development status.
October 5, 2005 Doc. 4047 Rev 0
6
iTerra Communications
2400 Geng Road, Ste. 100, Palo Alto, CA 94303
Phone (650) 424-1937, Fax (650) 424-1938

6 Page







SeitenGesamt 6 Seiten
PDF Download[ iT4005D Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
iT4005D12-Gb/s GaAs MMIC D flip-flopIterra
Iterra

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche