|
|
PDF iT4021D Data sheet ( Hoja de datos )
| Número de pieza | iT4021D | |
| Descripción | T-type flip flop | |
| Fabricantes | Iterra | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de iT4021D (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
|
No Preview Available !
iT4021D
20 Gb/s (12.5 Gb/s RZ) T-Type Flip-Flop
(Advanced Information)
Description
www.DataSheet4U.com
The iT4021D is a high-speed T-type flip-flop fabricated using 1µm HBT GaAs technology. The
T flip-flop consists of a master-slave latch, closed-in feedback, and is designed using an ECL
topology in order to guarantee high-speed operation. The data input may be either AC or DC
coupled, the output is DC coupled. At the input side the internal 50-ohm resistors avoid the
need for external terminations for impedance matching. The iT4021D uses SCFL I/O levels
and is designed to allow for either single-ended or differential data input/output. An on-chip,
output buffer produces an excellent eye diagram up to an output rate of 12.5 Gb/s rate (20
Gb/s NRZ or 12.5 Gb/s RZ input data rate) or 14 GHz input clock. The high output voltage,
excellent rise and fall times, and the high-quality eye diagram at all clock frequencies makes
the iT4021D suitable for very-high-speed, complex digital applications such as differential
encoding, clock dividers, and edge detectors.
Features
Data rate range: 20 NRZ (12.5 RZ) Gb/s
Maximum clock frequency as clock divider: 14 GHz
900 mVpp typical single-ended output
Input sensitivity: Single ended input >250 mV
Jitter transfer RMS: <1 ps
Output rise time (20% - 80%): <27 ps
Output fall time (20% - 80%): <24 ps
DC or AC coupled data input
50-ohm matched DC-coupled data output
Differential or single-ended inputs and
outputs
Full SCFL I/O level compatibility
Low power consumption: 0.71 W
Device
Diagram
Timing Diagram
www.iterrac.com
This is an Advanced data sheet. See “Product Status Definitions”
on Web site or catalog for product development status.
April 24, 2007 Doc. 4049 Rev 1.0
1
iTerra Communications
2400 Geng Road, Ste. 100, Palo Alto, CA 94303
Phone (650) 424-1937, Fax (650) 424-1938
1 page  
Recommended
Chip Mounting
www.DataSheet4U.com
iT4021D
20 Gb/s (12.5 Gb/s RZ) T-Type Flip-Flop
(Advanced Information)
Pad Positions
and Chip
Dimensions
Chip size:
1600 µm ±10 µm x
2000 µm ±10 µm edge
to edge
Chip thickness:
104 µm ±3 µm
Pad size:
100 µm x 100 µm
RF pad pitch:
150 µm
Unlabeled pads are
ground and may be
left floating
www.iterrac.com
This is an Advanced data sheet. See “Product Status Definitions”
on Web site or catalog for product development status.
April 24, 2007 Doc. 4049 Rev 1.0
5
iTerra Communications
2400 Geng Road, Ste. 100, Palo Alto, CA 94303
Phone (650) 424-1937, Fax (650) 424-1938
5 Page | ||
| Páginas | Total 5 Páginas | |
| PDF Descargar | [ Datasheet iT4021D.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| iT4021D | T-type flip flop | Iterra |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |