Datenblatt-pdf.com


XR-H33MD Schematic ( PDF Datasheet ) - Aiwa

Teilenummer XR-H33MD
Beschreibung MD / CD Stereo System
Hersteller Aiwa
Logo Aiwa Logo 




Gesamt 30 Seiten
XR-H33MD Datasheet, Funktion
www.DataSheet4U.com
For assistance and information
call toll free I-800-BUY-IWL4
(United States and Puerto Rico)
LI
7-N138-909-0”1
71220AKY-U4






XR-H33MD Datasheet, Funktion
Inserting batteries
Detach the battery cover on the rear of the remote control and
insert two R6 (size AA) batteries.
“SET-I=POWER
CD
aMD
www.DataSheet4U.com
R6iAA)
When to replace the batteries
The maximum operational distance between the remote control
and the sensor on the main unit should be approximately 5 meters
(16 feet). When this distance decreases, replace the batteries
with new ones.
To use SHIFT on the remote control
Buttons o have two different functions. One of these functions
is indicated on the button, and the other on the plate above the
button.
To use the function on the button, simply press the button.
To use the function on the plate above the button, press the
button while pressing SHIFT.
To use FUNCTION on the remote control
FUNCTION substitutes for the function buttons (TAPE DECK 1/
2, TUNER, AU)UD-IN, CD, MD) on the main unit.
Each time FUNCTION is pressed, the next function is selected
cyclically. When tapes are inserted in both decks, both decks
are selected with FUNCTION.
SHIFT
FUNCTION —
To turn the unit on
Press one of the function buttons (TAPE, TUNER, AUX/D-lN,
CD, MD).
Playback of the inserted disc or tape begins, or the previously
tuned station is received (Direct Play Function).
POWER is also available.
When the unit is turned on, the disc compartment may open and
close to reset the unit.
To turn the unit off
Press POWER.
DEMO (Demonstration) mode
When the AC cord is connected, the display window
demonstrates the functions of the unit. When the power is turned
on, the DEMO display is overridden by the operation display.
When the power is turned off, the DEMO mode is restored.
Press II SET during DEMO display. The clock display
appears. (To set the current time, see SETTING THE CLOCK
~ on page 29.) To re-activate the DEMO mode, press +~.
Flash windows
The windows on the top of the unit and the MD drive light up or
flashe while the unit is being powered on.
To turn off the light of the top window, press s while pressing
CD. To turn back on, repeat the above.
To turn off the light of the MD drive, press s while pressing MD.
To turn back on, repeat the above.
c If the unit is not going to be used for an extended period of
time, remove the batteries to prevent possible electrolyte
leakage.
q The remote control may not operate correctly when:
- The line of sight between the remote control and the remote
sensor inside the display window is exposed to intense light,
such as direct sunlight
- Other remote controls are used nearby (those of a television,
etc.)
~ ENGLISH

6 Page









XR-H33MD pdf, datenblatt
www.DataSheet4U.com
Press CD, then press A OPEN/CLOSE to open the disc
compartment. Load disc(s) with the label side up.
To play one or two discs, place the discs on tray 1 and 2.
To play three discs, press DISC CHANGE to rotate the trays
after placing two discs. Place the third disc on tray 3.
Close the disc compartment by pressing A OPEN/CLOSE.
Tray 1
DISC CHANG
Trav number of the Total number
dis; to be played of tracks
Total playing time
To play one disc only, press DISC DIRECT PLAY 1-3.
The selected disc is played once.
To stop play, press s .
To pause play, press II. To resume play, press again.
To search for a particular point during playback, keep ~
or > pressed and release it at the desired point.
To skip to the beginning of a track, press 4 or ~
repeatedly or turn MULTI JOG until the desired track is displayed.
To remove discs, press 4 OPEN/CLOSE.
To start play when the power is off (Direct Play Function)
Press CD. The power is turned on and play of the loaded disc(s)
begins.
When A OPEN/CLOSE is pressed, the power is also turned on.
To check the remaining time
During play, press EDIT/CHECK on the remote control while
pressing SHIFT. The amount of time remaining until all tracks
finish playing is displayed. To restore the playing time display,
repeat the above.
Selecting a track with the remote control
1 Press DISC DIRECT PLAY 1-3to select a disc.
2 Press numbered buttons O-9, and +1O to select a track.
Example:
To select the 25th track, press +1O &.I& and 5,
To select the 10th track, press +1O and O.
The selected track starts to play and continues to the end of
that disc.
Replacing discs during play
While one disc is playing, the other discs can be replaced without
interrupting play.
1 Press DISC CHANGE.
2 Remove the discs and replace with other discs.
3 Press = OPEN/CLOSE to close the disc compartment.
q When loading an 8-cm (3-inch) disc, put it on the inner circle of
the tray.
q Do not place more than one compact disc on one disc tray.
q Do not tilt the unit with discs loaded. Doing so may cause
malfunctions.
q Do not use irregular shape CDs (example: heart-shaped,
octagonal ones). It may result in malfunctions.
Load discs.
To play all discs in the disc compartment,
Play begins with the disc on tray 1.
press +-.
Number of track
being played
Elapsed playing time
1 I ENGLISH

12 Page





SeitenGesamt 30 Seiten
PDF Download[ XR-H33MD Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
XR-H33MDMD / CD Stereo SystemAiwa
Aiwa

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche