|
|
Teilenummer | OB2262 |
|
Beschreibung | Current Mode PWM Controller | |
Hersteller | On-Bright | |
Logo | ||
Gesamt 13 Seiten OB2262
GENERAL DESCRIPTION
OB2262 is a highly integrated current mode PWM
control IC optimized for high performance, low
standby power and cost effective offline flyback
converter applications in sub 30W range.
PWM switching frequency at normal operation is
externally programmable and trimmed to tight range.
At no load or light load condition, the IC operates in
extended ‘burst mode’ to minimize switching loss.
Lower standby power and higher conversion
efficiency is thus achieved.
www.DataSheeVt4DUD.comlow startup current and low operating current
contribute to a reliable power on startup design with
OB2262. A large value resistor could thus be used in
the startup circuit to minimize the standby power.
The internal slope compensation improves system
large signal stability and reduces the possible sub-
harmonic oscillation at high PWM duty cycle output.
Leading-edge blanking on current sense(CS) input
removes the signal glitch due to snubber circuit diode
reverse recovery and thus greatly reduces the external
component count and system cost in the design.
OB2262 offers complete protection coverage with
automatic self-recovery feature including Cycle-by-
Cycle current limiting (OCP), over load protection
(OLP), VDD over voltage clamp and under voltage
lockout (UVLO). The Gate-drive output is clamped
to maximum 18V to protect the power MOSFET.
Excellent EMI performance is achieved soft
switching control at the totem pole gate drive output.
TYPICAL APPLICATION
Current Mode PWM Controller
The tone energy at below 20KHZ is minimized in the
design and audio noise is eliminated during operation.
OB2262 is offered in SOT23-6, SOP-8 and DIP-8
packages.
FEATURES
■ Extended Burst Mode Control For Improved
Efficiency and Minimum Standby Power Design
■ Audio Noise Free Operation
■ External Programmable PWM Switching
Frequency
■ Internal Synchronized Slope Compensation
■ Low VDD Startup Current and Low Operating
Current (1.4mA)
■ Leading Edge Blanking on Current Sense Input
■ Good Protection Coverage With Auto Self-
Recovery
o VDD Over Voltage Clamp and Under Voltage
Lockout with Hysteresis (UVLO)
o Gate Output Maximum Voltage Clamp (18V)
o On-Bright Proprietary Line Input Compensated
Cycle-by-Cycle Over-current Threshold Setting
For Constant Output Power Limiting Over
Universal Input Voltage Range.
o Overload Protection (OLP).
APPLICATIONS
Offline AC/DC flyback converter for
■ Battery Charger
■ Power Adaptor
■ Set-Top Box Power Supplies
■ Open-frame SMPS
AC IN
EMI
F i l te r
4
2
+
+
V DD
GATE
OB2262
RI SENSE
FB GND
+ DC OUT
OB431
©On-Bright Electronics
Confidential to Micro Bridge
- 1 - OB_DOC_DS_62B5
OB2262
Current Mode PWM Controller
Gate Drive Output
VOL
Output Low Level
VOH
Output High Level
V_Clamp
Output Clamp Voltage
Level
T_r Output Rising Time
T_f Output Falling Time
VDD = 16V, Io = -20 mA
VDD = 16V, Io = 20 mA 10
VDD = 16V, CL = 1nf
VDD = 16V, CL = 1nf
0.8
18
220
70
V
V
V
nSec
nSec
www.DataSheet4U.com
©On-Bright Electronics
Confidential to Micro Bridge
- 6 - OB_DOC_DS_62B5
6 Page 8-Pin Plastic DIP
www.DataSheet4U.com
OB2262
Current Mode PWM Controller
©On-Bright Electronics
- 12 -
Confidential to Micro Bridge
OB_DOC_DS_62B5
12 Page | ||
Seiten | Gesamt 13 Seiten | |
PDF Download | [ OB2262 Schematic.PDF ] |
Teilenummer | Beschreibung | Hersteller |
OB2262 | Current Mode PWM Controller | On-Bright |
OB2262 | 15W Adapter Module Design | On-Bright |
OB2263 | Current Mode PWM Controller | On-Bright |
OB2268 | (OB2268 / OB2269) Current Mode PWM Controller | Liteon |
OB2268 | Flyback switching power supply applications | On-Bright Electronics |
Teilenummer | Beschreibung | Hersteller |
CD40175BC | Hex D-Type Flip-Flop / Quad D-Type Flip-Flop. |
Fairchild Semiconductor |
KTD1146 | EPITAXIAL PLANAR NPN TRANSISTOR. |
KEC |
www.Datenblatt-PDF.com | 2020 | Kontakt | Suche |