|
|
PDF E5C4 Data sheet ( Hoja de datos )
| Número de pieza | E5C4 | |
| Descripción | Temperature Controller | |
| Fabricantes | Omron Electronics | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de E5C4 (archivo pdf) en la parte inferior de esta página. Total 8 Páginas | ||
|
No Preview Available !
Temperature Controller
DIN-sized (48 x 48 mm) Temperature
Controller With Digital Setting
Compact, low-cost Temperature Controller
Incorporates proportional adjustment and reset
adjustment function.
Incorporates a plug-in socket, thus allows to
DIN-track and flush mounting.
E5C4
www.DataSheet4U.com
Ordering Information
Temperature Controllers
Setting method
Indication
method
Control
mode
Output
Model
Thermocouple
(with sensor burnout detection
circuit)
Platinum resistance
thermometer
JPt100
Digital setting Digital indication ON/OFF
Relay
E5C4-R20K
E5C4-R20J
E5C4-R20P
Voltage (for E5C4-Q20K
driving SSR)
E5C4-Q20J
E5C4-Q20P
P
Relay
E5C4-R40K
E5C4-R40J
E5C4-R40P
Voltage (for E5C4-Q40K
driving SSR)
E5C4-Q40J
E5C4-Q40P
Note: When placing an order, specify the standard temperature range and supply voltage in addition to the model number.
(e.g., E5C4-R20K 0°C to 399°C 100/110 VAC)
Accessories (Order Separately)
Name
Front Connecting Socket
Back Connecting Socket (for flush mounting)
Watertight Cover
P2CF-08
P3G-08
Y92A-48N
Model
Temperature Ranges
Input
Range
Setting
°C
°F
0 to 399
32 to 799
1°C/°F
Thermocouple
K (CA)
Chromel vs. alumel
0 to 999
32 to 999
1°C/°F
J (IC)
Iron vs. constantan
0 to 399
32 to 999
32 to 799
1°C/°F
Platinum resistance
thermometer
JPt100
0 to 99.9
32 to 199
0.1°C/1°F
1
1 page  
E5C4
P3G-08 Back Connecting Socket (for Flush Mounting)
27 dia.
Installation
Connections
Input
Connect a thermocouple or platinum resistance thermometer to the
E5C4 as shown in the following illustration.
www.DataSheet4U.coPthlmeartminuommerteesrisintapnucte
Thermocouple input
Voltage output (Terminal 6 is
an NC terminal)
Relay output
Supply voltage
100/110, 200/220,
110/120, 220/240 VAC,
50/60 Hz
Output
If the load circuit is a heating control system, be sure to connect the
load to terminals 4 and 5. If the load circuit is a cooling control sys-
tem, be sure to connect the load to terminals 4 and 6. If the heating
control system is connected to terminals 4 and 6 or the cooling con-
trol system is connected to terminals 4 and 5, the temperature of the
heating control system or cooling control system will be abnormal
and a serious accident may result.
If the E5C4 is in frequent operation, such as proportional operation,
add an appropriate external relay to the E5C4 by considering the ca-
pacity of the load and the life of the relay.
Do not ground the output of any E5C4 that has voltage output, other-
wise the process temperature may not be accurate.
Power Supply
If a single power supply is used for the E5C4 and the load, the supply
voltage of the power supply may vary greatly when the load is open
or closed if the capacity of the power supply is not large enough.
Make sure that the capacity of the power supply is large enough so
that the supply voltage range will be always from 90% to 110% of the
rated supply voltage.
The E5C4 operates at either 50 or 60 Hz.
E5C4
Terminal Arrangement/
Internal Connections
(Bottom View)
5
5 Page | ||
| Páginas | Total 8 Páginas | |
| PDF Descargar | [ Datasheet E5C4.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| E5C2 | DIN-sized (48 x 48 mm) Temperature Controller | Omron Electronics |
| E5C4 | Temperature Controller | Omron Electronics |
| E5CJ | (E5xJ) Temperature Controller |  Omron |
| E5CN | Digital Temperature Controller | Omron |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |