|
|
Teilenummer | XC-EI50CE |
|
Beschreibung | (XC-Exx0CE) CCD B/W Camera Module | |
Hersteller | Sony | |
Logo | ||
Gesamt 30 Seiten www.DataSheet4U.com
CCD B/W CAMERA MODULE
XC-ES50/50CE
XC-ES30/30CE
XC-EI50/50CE
XC-EI30/30CE
User’s
Guide
(Ver. 1.0) — English —
XC-E series
www.DataSheet4U.com
MAIN SPECIFICATIONS
Shock resistance 70G
Outside dimensions 29 (W) x 29 (H) x 32 (D) mm
Weight
50 g
Standards
UL1492, FCC Class A Digital
Device, and CE (EN50081-2 +
EN50082-2)
Other
Restart Reset function
Frame or field integration can be
selected.
Conforms to new EIAJ and uses
12-pin assignment.
Accessories
Lens mount cap (1)
Instruction Manual (1)
External synchronization for each mode
Mode
Normal
Normal shutter
Internal sync
External sync
HD/VD
VS
Mode 1
×
Mode 2
Restart Reset
Trigger signal
generates an
internal VD
(single) signal.
×
××
×
: Can be used.
×: Cannot be used.
CONNECTION DIAGRAM
C-mount lens
VCL-08Y-M
VCL-12Y-M
XC-ES50/50CE
XC-ES30/30CE
XC-EI50/50CE
XC-EI30/30CE
VCL-16Y-M
VCL-25Y-M
Tripod adaptor
VCT-333I
LO-77ERK
VCL-50Y-M
Close-up ring kit
Camera cable
CCXC-12P02N
CCXC-12P05N
CCXC-12P10N
CCXC-12P25N
Camera adaptor
AC
VIDEO OUT
HD/VD
WEN
TRIG
DC-700/CE
(Conforms to new EIAJ and uses 12-pin assignment.)
Junction box
JB-77
(No trigger input terminal is provided.)
DC +12 V
VIDEO OUT
HD/VD
Note : All functions of the XC-ES50/50CE, XC-ES30/30CE, XC-EI50/50CE, XC-EI30/30CE
cannot be used when using DC-777/CE, DC-77RR/CE, and JB-77 is used.
Refer to the table shown below.
XC-ES50/50CE
XC-ES30/30CE
XC-EI50/50CE
XC-EI30/30CE
Normal
Normal shutter
Restart Reset (R.R)
Restart Reset (R.R)
+
shutter
External trigger shutter
4
JB-77
: Can be used.
× ×: Cannot be used.
6 Page XC-E series
www.DataSheet4U.com
ELECTRONIC SHUTTER
When using a trigger pulse like shown below, set the TRIG polarity selector switch on the rear panel to – :
A
B
T
A: 4.0 to 5.0 V
B: 0 to 2.0 V
T: 2 µs to 1/4 s, 100 µs to 1/4 s when setting the shutter speed using DIP switch
* Input impedance: 10 kΩ or more
* The voltage and pulse width used are measured at pin 11 of a 12-pin multi-connector on the rear panel.
Specifications of WEN (Write ENable Pulse)
A
T
A: 5.0 V
B: 0 V
T: 15.875 ms (XC-ST70), 18.752 ms (XC-ST70CE)
* Output impedance: 10 kΩ or more
B
10
12 Page | ||
Seiten | Gesamt 30 Seiten | |
PDF Download | [ XC-EI50CE Schematic.PDF ] |
Teilenummer | Beschreibung | Hersteller |
XC-EI50CE | (XC-Exx0CE) CCD B/W Camera Module | Sony |
Teilenummer | Beschreibung | Hersteller |
CD40175BC | Hex D-Type Flip-Flop / Quad D-Type Flip-Flop. |
Fairchild Semiconductor |
KTD1146 | EPITAXIAL PLANAR NPN TRANSISTOR. |
KEC |
www.Datenblatt-PDF.com | 2020 | Kontakt | Suche |