Datenblatt-pdf.com


STA1000-10T2MI Schematic ( PDF Datasheet ) - Vishay Intertechnology

Teilenummer STA1000-10T2MI
Beschreibung Wet Tantalum Capacitors
Hersteller Vishay Intertechnology
Logo Vishay Intertechnology Logo 




Gesamt 2 Seiten
STA1000-10T2MI Datasheet, Funktion
www.DataSheet4U.com
STA
Vishay
Wet Tantalum Capacitors with Hermetic Seal
Vishay STA represents a major breakthrough in Wet Tantalum
capacitor technology. Its unique cathode system, also used
in the ST, provides the highest capacitance per unit volume
available. The STA combines the inherent reliability of wet
tantalum with the capacitance stability of solid tantalum, and
there are no circuit impedance restrictions. The range is
exceptionally well suited for low voltage filtering and energy
storage applications.
FEATURES
• Very High Capacitance
• 150 to 4700µF
• 6 to 15VDC
• - 55°C to + 85°C
APPLICATION NOTES
a) No continuous reverse voltage permissible.
b) Transient reverse voltage surges are acceptable under
the following conditions:
The peak reverse voltage does not exceed 1.5 volts and
the peak current times the duration of the reverse
transient does not exceed 0.05 ampere seconds. In
addition, the repetition frequency of the reverse voltage
surge is less than 10Hz.
c) The peak of the applied AC ripple and the applied
DC voltage must not exceed the DC voltage rating
of the capacitor.
d) Ripple current ratings by part number at 85 ºC and 40kHz
are included in the table. Ripple current correction factors
for other temperatures and frequencies are given on the
next page.
DIMENSIONS in inches (millimeters)
TERMINAL
WELDED TO CASE
0.250 (6.35)
MAX.
0.025 + 0.002
(0.64 + 0.05)
0.094 (2.38)
MAX.
E
L
CASE
CODE
T1
T2
T3
T4
Approx. Weight
D MAX.
INSULATED
0.219 (5.56)
0.312 (7.92)
0.406 (10.31)
0.406 (10.31)
T1: 2.3 grams,
T3: 9.4 grams,
D ± 0.016 (0.41)
UNINSULATED
0.188 (4.78)
0.281 (7.14)
0.375 (9.52)
0.375 (9.52)
T2: 5.7 grams
T4: 14.8 grams
ORDERING INFORMATION
STA
STYLE
2700
CAPACITANCE
µF
15
85°C
RATED DC
VOLTAGE
E
“D” DIA.
L + 0.031 - 0.016
(- 0.41)
E ± 0.250 (6.35)
0.453 (11.51)
1.500 (38.10)
0.641 (16.28)
0.250 (57.15)
0.766 (19.46)
2.250 (57.15)
1.062 (26.97)
2.250 (57.15)
NOTES:
1. Material at egress is tantalum.
2. Insulation sleeving will lap over the ends of the capacitor case.
3. Tinned nickel leads, solderable and weldable
T4
CASE
CODE
M
CAPACITANCE
TOLERANCE
M = ± 20%
K = ± 10%
I
INSULATING
SLEEVE
I = Insulated
X = Uninsulated
www.vishay.com
70
For technical questions, contact [email protected]
Document Number: 43013
Revision 28-Jul-03





SeitenGesamt 2 Seiten
PDF Download[ STA1000-10T2MI Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
STA1000-10T2MIWet Tantalum CapacitorsVishay Intertechnology
Vishay Intertechnology

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche