Datenblatt-pdf.com


MN101C62D Schematic ( PDF Datasheet ) - Matsushita Electric

Teilenummer MN101C62D
Beschreibung MN101 Series microcontroller
Hersteller Matsushita Electric
Logo Matsushita Electric Logo 




Gesamt 30 Seiten
MN101C62D Datasheet, Funktion
Sheet4U.com
AM1 (MN101) Series
AM1 (MN101) Series
The AM1 Series of 8-bit microcomputers is the realization of developments in C
programming.
Because of the 8-bit architecture, which allows half-byte instruction sets and offers
other advantages, assembler ROM code size can be reduced.
They are compact and consume little power, but feature a shortest instruction
processing time of 63 ns (5 V).
They can be used in a wide variety of applications where cost performance is a
demand.
Features
q Efficiency of C-based ROM code: Assembler rate 1 or less
q High-speed instruction processing: 63 ns (32 MHz)
q Linear address space: 1 MB
q Identical architecture for 32- and 16-bit microcomputers
q Option functions
Hardware task switching (Max. 4 task)
16-bit multiplication
ROM collection
s Application






MN101C62D Datasheet, Funktion
www.DataSheet4U.com
MN101C309 , MN101C30A
Type
ROM (× 8-bit)
External memory can be expanded
RAM (× 8-bit)
External memory can be expanded
Package
Minimum Instruction
Execution Time
Interrupts
Timer Counter
MN101C309
24 K
MN101C30A
32 K
1 K 1.5 K
LQFP064-P-1414 *Lead-fre
0.10 µs (at 4.5 V to 5.5 V, 20 MHz)
0.238 µs (at 2.7 V to 5.5 V, 8.39 MHz)
1.00 µs (at 2.0 V to 5.5 V, 2 MHz)*
125 µs (at 2.0 V to 5.5 V, 32.768 kHz)*
* The lower limit for operation guarantee for EPROM built-in type is 2.7 V.
• RESET • Watchdog • External 0 • External 1 • External 2 • External 3 • External 4 • Timer 0
• Timer 1 • Timer 2 • Timer 3 • Timer 4 • Timer 5 • Time Base • Serial 0 • Serial 1
• Automatic transfer finish • A/D conversion finish
Timer counter 0 : 8-bit × 1 (square-wave/8-bit PWM output, event count, generation of remote control carrier)
Clock source ····················· 1/1, 1/4 of system clock frequency; 1/1 of OSC oscillation clock frequency;
external clock input
Interrupt source ················· coincidence with compare register 0
Timer counter 1 : 8-bit × 1 (square-wave output, event count, synchronous output event)
Clock source ····················· 1/16, 1/64 of system clock frequency; 1/1 of XI oscillation clock frequency;
external clock input
Interrupt source ················· coincidence with compare register 1
Timer counter 0, 1 can be cascade-connected.
Timer counter 2 : 8-bit × 1 (square-wave/8-bit PWM output, event count, synchronous output event)
Clock source ····················· 1/1, 1/4 of system clock frequency; 1/1 of XI oscillation clock frequency;
external clock input
Interrupt source ················· coincidence with compare register 2
Timer counter 3 : 8-bit × 1
(square-wave output, event count, generation of remote control carrier, serial 0 baud rate timer)
Clock source ····················· 1/4, 1/16 of system clock frequency; 1/1 of OSC oscillation clock frequency;
external clock input
Interrupt source ················· coincidence with compare register 3
Timer counter 2, 3 can be cascade-connected.
Timer counter 4 : 16-bit × 1
(square-wave/16-bit PWM output, event count, synchronous output event, input capture)
Clock source ····················· 1/4, 1/16 of system clock frequency; 1/1 of OSC oscillation clock frequency;
external clock input
Interrupt source ················· coincidence with compare register 4
Time base timer (one-minute count setting, independently operable 8-bit timer counter 5)
Clock source ····················· 1/4 of system clock frequency; 1/1, 1/8192 of OSC oscillation clock frequency;
1/1, 1/8192 of XI oscillation clock frequency
Interrupt source ················· coincidence with compare register 5; 1/8192 prescaler overflow
Watchdog timer
Interrupt source ················· 1/65536, 1/262144, 1/1048576 of system clock frequency (ROM option)
MAD00005EEM
16

6 Page









MN101C62D pdf, datenblatt
www.DataSheet4U.com
MN101C457
Type
ROM (× 8-bit)
RAM (× 8-bit)
Package
Minimum Instruction
Execution Time
Interrupts
Timer Counter
Serial Interface
I/O Pins
I/O
A/D Inputs
Special Ports
Input
MN101C457
16 K
0.5 K
QFP044-P-1010F *Lead-free
0.10 µs (at 4.5 V to 5.5 V, 20 MHz)
0.238 µs (at 2.7 V to 5.5 V, 8.39 MHz)
0.477 µs (at 2.0 V to 5.5 V, 4.19 MHz)
• RESET • Watchdog • External 0 • External 1 • External 2 • Timer 2 • Timer 3 • Timer 4 • Timer 5 • Time base
• Serial 0 • A/D conversion finish
Timer counter 2 : 8-bit × 1 (square-wave/8-bit PWM output, event count, synchronous output event)
Clock source ····················· 1/1, 1/4 of system clock frequency; external clock input
Interrupt source ················· coincidence with compare register 2
Timer counter 3 : 8-bit × 1
(square-wave output, event count, generation of remote control carrier, serial 0 baud rate timer)
Clock source ····················· 1/4, 1/16 of system clock frequency; 1/1 of OSC oscillation clock frequency;
external clock input
Interrupt source ················· coincidence with compare register 3
Timer counter 2, 3 can be cascade-connected.
Timer counter 4 : 16-bit × 1
(square-wave/16-bit PWM output, event count, synchronous output event, input capture)
Clock source ····················· 1/4, 1/16 of system clock frequency; 1/1 of OSC oscillation clock frequency;
external clock input
Interrupt source ················· coincidence with compare register 4
Time base timer (one-minute count setting, independently operable 8-bit timer counter 5)
Clock source ····················· 1/4 of system clock frequency; 1/1, 1/8192 of OSC oscillation clock frequency
Interrupt source ················· coincidence with compare register 5; 1/8192 prescaler overflow
Watchdog timer
Interrupt source ················· 1/65536, 1/262144, 1/1048576 of system clock frequency (ROM option)
Serial 0 : synchronous type/simple UART (half-duplex) × 1
Clock source ····················· 1/2, 1/4, 1/16 of system clock frequency; pulse output of timer counter 3
26 • Common use: 16 • Specified pull-up resistor available
• Input/output selectable (bit unit): 26
11 • Common use • Specified pull-up resistor available
10-bit × 8-ch. (with S/H)
Buzzer output, remote control carrier signal output, high-current drive port
MAD00003GEM
22

12 Page





SeitenGesamt 30 Seiten
PDF Download[ MN101C62D Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
MN101C62The lower limit for operation guarantee for flash memory built-in type is 2.5 VPanasonic Semiconductor
Panasonic Semiconductor
MN101C62DMN101 Series microcontrollerMatsushita Electric
Matsushita Electric
MN101C62FMN101 Series microcontrollerMatsushita Electric
Matsushita Electric

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche